AZ954 SUBMINIATURE POWER RELAY FEATURES • • • • • • • • Subminiature size for high density packaging Coil sensitivity to 114 mW Extremely low cost Coils to 24 VDC Epoxy sealed version available 2 Amp contacts Life expectancy to 10 million operations UL, CUR file E43203 CONTACTS GENERAL DATA Arrangement SPDT (1 Form C) Ratings Resistive load: Light Duty Medium Duty Max. switched power: 30 W or 125 VA Max. switched current: 1 A Max. switched voltage: 150 VDC* or 300 VAC UL Rating: 1 A at 125 VAC General Use 1 A at 30 VDC Resistive Max. switched power: 30 W or 250 VA Max. switched current: 2 A Max. switched voltage: 150 VDC* or 300 VAC UL Rating: 2 A at 125 VAC General Use 1 A at 30 VDC Resistive. Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 2 A 120 VAC Res. Operate Time (typical) 5 ms at nominal coil voltage Release Time (typical) 1 ms at nominal coil voltage (with no coil suppressions) Dielectric Strength 1250 Vrms coil to contact (at sea level for 1 min.) 750 Vrms between open contacts Insulation Resistance 100 megohms min. at 20°C, 500 VDC Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage 0.45W: -25°C (-13°F) to 55°C (131°F) 0.36W: -25°C (-13°F) to 65°C (149°F) 0.2W: -25°C (-13°F) to 75°C (167°F) Vibration 0.062" (1.5 mm) DA at 10–55Hz Shock 15 g 0.45W coil: 253 mW 0.36W coil: 203 mW 0.2W coil: 114 mw Enclosure P.B.T. polyester Terminals Tinned copper alloy Max Continuous Dissipation 0.8 W at 20°C (68°F) ambient Max. Solder Temp. 270°C (518°F) Temperature Rise At nominal coil voltage: 0.45W coil: 54°C (97°F) 0.36W coil: 44°C (79°F) 0.2W coil: 30°C (54°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds 130°C (266°F) Weight 3.5 grams Material Silver nickel, gold clad Resistance < 100 milliohms initially COIL Power At Pickup Voltage (typical) Max. Temperature NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Other coil resistances and sensitivities available upon request. 4. Specifications subject to change without notice. ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-06-26 AZ954 RELAY ORDERING DATA MEDIUM DUTY RELAYS – 0.45 W COIL COIL SPECIFICATIONS Nominal Coil VDC 3 Max. Continuous VDC 4.0 Coil Resistance ±10% 20 Must Operate VDC 2.25 ORDER NUMBER* AZ954X–1C–3D AZ954Y–1C–3D 5 6.7 56 3.75 AZ954X–1C–5D AZ954Y–1C–5D 6 8.0 80 4.50 AZ954X–1C–6D AZ954Y–1C–6D 9 12.0 180 6.75 AZ954X–1C–9D AZ954Y–1C–9D 12 16.0 320 9.0 AZ954X–1C–12D AZ954Y–1C–12D 24 32.0 1,280 18.0 AZ954X–1C–24D AZ954Y–1C–24D MEDIUM DUTY RELAYS – 0.36 W COIL COIL SPECIFICATIONS Nominal Coil VDC 3 Max. Continuous VDC 4.5 ORDER NUMBER* Coil Resistance ±10% 25 Must Operate VDC 2.25 AZ954X–1C–3DM AZ954Y–1C–3DM 5 7.5 70 3.75 AZ954X–1C–5DM AZ954Y–1C–5DM 6 8.9 100 4.50 AZ954X–1C–6DM AZ954Y–1C–6DM 9 13.4 225 6.75 AZ954X–1C–9DM AZ954Y–1C–9DM 12 17.8 400 9.0 AZ954X–1C–12DM AZ954Y–1C–12DM 24 35.7 1,600 18.0 AZ954X–1C–24DM AZ954Y–1C–24DM LIGHT DUTY RELAYS – 0.2 W COIL COIL SPECIFICATIONS Nominal Coil VDC 3 Max. Continuous VDC 6.0 Coil Resistance ±10% 45 Must Operate VDC 2.25 ORDER NUMBER* AZ954X–1C–3DS AZ954Y–1C–3DS 5 9.8 120 3.75 AZ954X–1C–5DS AZ954Y–1C–5DS 6 12.0 180 4.50 AZ954X–1C–6DS AZ954Y–1C–6DS 9 17.8 400 6.75 AZ954X–1C–9DS AZ954Y–1C–9DS 12 23.6 700 9.0 AZ954X–1C–12DS AZ954Y–1C–12DS 24 47.3 2,800 18.0 AZ954X–1C–24DS AZ954Y–1C–24DS *Add suffix “E” for epoxy sealed version. MECHANICAL DATA .620 [15.75] AZ954X PC BOARD LAYOUT .423 [10.75] .400 [10.16] .465 [11.81] 5x ø.039±.005 [ø1.0] .060 [1.52] .060 [1.52] .100 [2.54] .125 [3.18] AZ954X WIRING DIAGRAM 1 .300 [7.62] .300 [7.62] .100 [2.54] VIEWED TOWARD TERMINALS AZ954Y PC BOARD LAYOUT AZ954Y WIRING DIAGRAM 1 2 .062 [1.56] .400 [10.16] 2 .062 [1.56] 6 6x ø.039±.005 [ø1.0] 7 7 12 11 VIEWED TOWARD TERMINALS .300 [7.62] 12 .060 [1.52] 11 VIEWED TOWARD TERMINALS .100 [2.54] VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010" ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2014-06-26