ILTS series Submersible Dual Level & Temperature Transmitter Stainless steel, piezo-resistive sensor Level accuracy: <0.1% FS BFSL Pressure ranges from 1mWG to 10mWG Temperature range: -20 to +60ºC Dual independent 4-20mA outputs Suitable applications River level & temperature Reservoir level & temperature Tank level & temperature Borehole level & temperature Aquifer level & temperature Environmental monitoring V-notch weir flow measurement The ILTS is designed for use in continuous submersion in liquids such as water, oil and fuels. The probe uses the latest piezoresistive media-isolated silicon sensing technology and a stainless steel diaphragm. Housed within a 316L stainless steel, or high grade Duplex stainless steel housing, this submersible transmitter is the ideal product for hydrostatic level measurement where temperature is also a critical part of the measurement. It offers excellent stability, repeatability and resolution, as required for use in rivers and reservoirs. Pressure Ranges Nominal Pressure, Gauge mWG 1 5 10 Permissible Overpressure mWG 20 50 50 Temperature Range Temperature range ºC -20 to +60 Level Performance Accuracy (Non-Linearity & Hysteresis) <±0.1% / FS (BFSL) Setting Errors (offsets) Permissible Load Influence Effects Temperature Performance Measurement Accuracy Thermal drift Loop Voltage effect Maximum output load Output Timing This type incorporates a Class ‘B’ accuracy platinum resistance thermometer. Every device is temperature compensated, calibrated and supplied with a traceable serial number and calibration certificate. Zero & Full Scale, <±0.5% / FS Rmax = [(Voltage Supply-9)/0.02]Ohms Supply <0.005% FS / 1V Load 0.05% FSO / kOhm (mA output/2000) or 5µA (whichever is the greater) 1 µA/ºC 0.2µA/V [(Vsupply-10)/21] kOhms (Example: 700 Ohms @ 24V) Transmitter start up time: 4 seconds (I out <4mA during start up) Warm up time: 1 minute to full accuracy Update time: 500ms Response time: 1 second Output Signals and Supply Voltages Output Supply Voltage Level (2-wire) 4-20mA 9-32Vdc Temperature (2-wire) 4-20mA 9-32Vdc Custom versions can be made for particular applications. Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Connection +ve Supply -ve Supply Ground & Cable Screen Wire Colours Red Blue Green +ve Supply White -ve Supply Yellow Ground Green & Cable Screen Email:[email protected] Web: www.cynergy3.com ISO9001 C E R T I F I E D www.cynergy3.com © 2014 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited. ILTS series Submersible Dual Level &Temperature Transmitter Electrical Protection Supply reverse polarity No damage but also no function Lightning protection Internally fitted Electromagnetic compatibility CE Compliant Mechanical Stability Shock 100g / 11ms Vibration 10g RMS (20 - 2000Hz) Temperatures & Thermal Effects Media Temperature -20ºC (Non-freezing) to +60ºC Storage temperature -20ºC to +70ºC Compensated temperature range(level only) 20ºC±25ºC Thermal Zero Shift (TZS) (level only) <±0.02% /FS/ºC Thermal Span Shift(TSS) (level only) <-0.015% /ºC Thermal Drift (temperature only) 1µA/ºC Part No ILTS-G0100-003 ILTS-G0500-007 ILTS-G1000-015 Material Specifications Housing “O” ring seals Diaphragm Cable sheath material Media wetted parts sheath Miscellaneous Current Consumption Weight Installation position Operational Life Pressure Range 0-1mWG (0-39"WG) 0-5mWG (0-197"WG) 0-10mWG (0-394"WG) 316L Stainless Steel Viton 316L Stainless Steel PUR Housing, “O” ring seal, diaphragm, cable Level transmitter limits at 28mA Temperature transmitter limits at 21.5mA Transmitter: approx 300g inc. nose cone Cable: 48g per meter Any, small zero shift when tilted through 90º > 100x 106 cycles Cable Length 3M 7M 15M PUR sheathed vented cable Mechanical Dimensions Boot 195mm Nominal Nose cone 25mm dia ISO9001 C E R T I F I E D www.cynergy3.com © 2014 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.