S Series High Voltage relays Compact footprint Designed specifically for High Voltage ATE Rhodium contacts for Low Contact Resistance 3kV or 5kV* Isolation between contacts and 5kV isolation between contacts and coil Excellent lifetime characteristics Contact Specification The S series relay was developed for the high voltage ATE market, where printed circuit board space is at a premium. The S series high voltage relay offers a 3kV or 5*kV isolation performance in a 30mm package. Low contact resistance, through the use of Rhodium contact reed switches, makes the S series suitable for many high voltage applications at DC and low frequency, where performance and reliability are paramount. Mechanical Dimensions All dimensions are in Milliemetres (inches) 8.50 (0.33) 7.30 (.29) 5 6 1 2 3 5.08 Contact Material Isolation across contacts Switching Power Max. Switching Voltage Max. Switching Current Max. Carry Current Max Capacitance across contacts Lifetime operations Must Operate Voltage Must Release Voltage Operate Time Release Time Resistance Relay Specification Isolation contact/coil Insulation resistance contact to all terminals 4.0±1 Envirnonmental Operating Temp range Weight V DC V DC ms diode fitted ms diode fitted W 5kV SPNO Rhodium 3 10 20 0.5 1.5 <0.1 109 106 80 (30) 1010 (1013) 12V 24V kV DC or AC peak W V DC or AC peak A DC or AC peak A DC or AC peak pF coil to screen grounded dry switching 10W switching Contact Resistance mW max (typical) Insulation Resistance W min (typical) Coil Specification at 20ºC 5V 5.08 (.20) 2.54 (.10) 3.7 0.5 1.0 0.5 140 9 1.25 1.0 0.5 600 20 4 1.0 0.5 1000 Rhodium 5 10 20 0.5 1.5 <0.1 109 106 80 (30) 1010 (1013) 5V 12V 3.7 0.5 1.0 0.5 140 9 1.25 1. 0.5 600 kV 5 5 W min (typical) 1010 (1013) 1010 (1013) ºC gm -20 to +70 3.1 -20 to +70 3.1 24V 20 4 10 0.5 1000 Part Numbering System S A R 9 12 05 PIN SIZE PINS 1, 2, 5 & 6 0.7 Square (0.025”) PINS 3 & 4 0.8 (0.031”) dia. Reed Switch Size Contact Form A=SPNO Relay Circuit Diagram 6 3 4 1 3kV SPNO 4 15.24 (.60) 25.40 (1.00) 27.60 (1.08) 5 Unit Condition 2 (Viewed from Underside) Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Pin 1 is top left, when viewed from above, with respect to part marking Contact Material R=Rhodium, Moulding Ref. No. Coil Voltage 05=5Vdc, 12=12Vdc, 24=24Vdc Isolation between Contacts 3=3kV, 5=5kV Email:[email protected] ISO9001 C E R T I F I E D www.cynergy3.com © 2013 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.