187.18 KB - Cynergy 3

RSF10 Series
High level switch for boiling water
Pivot out of liquid
High level switch position
WRAS approved for use in hot & cold water
Many variants are UL recognised
components File No. E171218
Flying lead or M12 connector
Technical Specification
Material
RSF14
Polypropylene
WRAS approved
Colour
Opaque
Temp. Range °C
-20 / +100
°F
-4 / +212
Min. Fluid SG
0.70
Must close level (SG=1)
39mm
Must open level (SG=1)
24mm
* Maximum temperature requires ETFE cable to be specified.
RSF18
Polypropylene
UL approved
White
-20 / +100
-4 / +212
0.80
39mm
24mm
Electrical Specification
Contact Form
Switching Power Max
VA
Switching Voltage AC Max
V
Switching Voltage DC Max
V
Switching Current Max
A
All ratings are for resistive load only.
100W (H code)
N/C (N/O)
100
300
300
1
25W (Y code)
N/C (N/O)
25
240
120
0.6
RSF16
Polyphenylene
Sulphide (PPS)
Grey
-10 / +120 *
+14 / +248 *
0.75
33mm
22mm
The RSF10 series drop float has been designed
to eliminate problems associated with
limescale build up around the pivot point of a
conventional float switch. It is also suitable in
Standard Parts
Material
Approvals
Max Power
Leadouts
more viscous liquids, that might affect the
RSF14H100RF
PP
WRAS
100VA
1 metre PVC 16/0.2
pivot action of a standard float type.
RSF14Y100RF
PP
WRAS
25VA
1 metre PVC 16/0.2
This particular series is primarily for
RSF16H050TG
PPS
WRAS & UL
100VA
50cm ETFE 19/0.2
applications where a high level condition has RSF16H100RF
PPS
WRAS & UL
100VA
1 metre PVC 16/0.2
RSF16Y050TG
PPS
WRAS & UL
25VA
50cm ETFE 19/0.2
to be monitored.
RSF16Y100TG
PPS
WRAS & UL
25VA
1 metre ETFE 19/0.2
The drop float actuator allows the switch
RSF16Y100RF
PPS
WRAS & UL
25VA
1 metre PVC 16/0.2
housing and float pivots to be located above
RSF18H100RF
PP (UL)
UL
100VA
1 metre PVC 16/0.2
the surface of the liquid and provides a
RSF18Y100RF
PP (UL)
UL
25VA
1 metre PVC 16/0.2
PP
WRAS
100VA
M12 connector
normally closed switch contact, opening as the RSF14HFP
P
PP
WRAS
25VA
M12 connector
liquid level rises. They are manufactured in a RSF14YF
RSF16HFP
PPS
WRAS & UL
100VA
M12 connector
range of materials, with a choice of gasket
RSF16YFP
PPS
WRAS & UL
25VA
M12 connector
material, to suit most commonly used liquids. RSF18HFP
PP (UL)
UL
100VA
M12 connector
RSF18YFP
PP (UL)
UL
25VA
M12 connector
Typical applications include wall kettles and
Custom versions can be made for particular applications. Please contact Cynergy3 with your requirements.
hot vending machines.
Versions available with either flying leads or Mechanical Dimensions
All dimensions are in millimetres (inches)
M12 circular connector.
There are cable sets available for use with
Mounting Surface M16 x 2
M12 connector versions.
8mm (0.3") max tank wall
(Internal)
M12 connection version
Nylon nut
Max.
O 24
28º
Gasket
Nitrile
Nitrile
Viton
Nitrile
Viton
Viton
Nitrile
Nitrile
Nitrile
Nitrile
Nitrile
Nitrile
Nitrile
Nitrile
Nitrile
2
1
3
4
Switch on pins 1 & 2
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset BH21 7PE
Telephone +44 (0) 1202 897969
Email:[email protected]
ISO9001 C E R T I F I E D
Must open
level
Must close
level
52
69 max.
16.5mm (0.65") dia
Hole in Tank
33.5
(35.0 for M12 connection version)
www.cynergy3.com
RSF10 2015
© 2015 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.