(1/4) Multilayer Chip Antennas For 2.4GHz band Conformity to RoHS Directive Halogen-free ANT Series ANT016008LCS2442MA2 SHAPES AND DIMENSIONS 0.4max. 0.8 1.6 (0.086) (0.085) (0.1) B 0.628 (0.1) A A: Feed point B: Radiator electrode Tolerance: ±0.1 mm 0.215 0.5 0.25 0.215 0.25 Dimensions in mm STANDARD MOUNTING POSITIONS FOR ANT016008LCS2442 PRODUCTS MA2 (This product) MA1 Antenna Antenna prohibition area PCB • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm. • All specifications are subject to change without notice. 001-01 / 20140228 / rf_ant_ant016008lcs2442ma2_en.fm (2/4) RECOMMENDED PC BOARD PATTERNS ELECTRODE Top side 6 (4.8) 0.2 0.2 0.6 0.95 2.5 Center line of chip antenna Antenna keep out area (GND off) 1.1 Ft : Frequency tuning component Mt : Impedance matching component Antenna Pattern Via : ø0.2mm GND 0.3 50Ω feed line 0.95 Dimensions in mm 0.25 Bottom side 0.2 6 4.8 0.6 0.2 Antenna keep out area (GND off) 4.2 2.5 0.5 Antenna Pattern Via : ø0.2mm GND Dimensions in mm LAND PATTERN/SOLDER RESIST Land pattern Solder resist 1.6 1.53 0.9 0.6 0.6 0.73 Center line of chip antenna 0.8 0.73 0.11 0.21 0.9 GND Dimensions in mm RECOMMEND APERTURE SIZE OF METAL MASK FOR SOLDER PRINTING 1.43 1.1 0.6 0.3 0.4 Aperture of metal mask Dimensions in mm • All specifications are subject to change without notice. 001-01 / 20140228 / rf_ant_ant016008lcs2442ma2_en.fm (3/4) ELECTRICAL CHARACTERISTICS Center frequency Band width(BW) VSWR (at BW) Polarization Impedance PCB size Antenna keep-out area Temperature range Operating Storage 2442MHz ±42MHz 3 Linear 50 50101.0mm3 62.5mm2 –40 to +85°C –40 to +85°C • This is typical antenna performance with the standard PCB. 0 11 –1 10 –2 9 –3 8 –4 7 –5 6 –6 5 –7 4 –8 3 –9 –10 2300 2400 2500 Frequency (GHz) VSWR Efficiency(dB) FREQUENCY CHARACTERISTICS EFFICIENCY AND VSWR Matching circuit Ft : 2.0nH Mt: 3.0nH 2 1 2600 Efficiency VSWR • All specifications are subject to change without notice. 001-01 / 20140228 / rf_ant_ant016008lcs2442ma2_en.fm (4/4) RADIATION PATTERNS Directivity angle Vertical polarization 315˚ 270˚ Y 270˚ Z 90˚ X Horizontal polarization 0˚ 10 (dBi) 0 –10 –20 –30 –40 –50 90˚ 135˚ 225˚ 0˚ 315˚ 45˚ 2400MHz 2442MHz 2484MHz 180˚ Vertical polarization 2442 Frequency(MHz) 2400 –1.4 –0.8 Average(dBi) –0.5 0.0 Maximum(dBi) –2.4 –2.1 Minimum(dBi) 315˚ 270˚ 270˚ 0˚ 10 (dBi) 0 –10 –20 –30 –40 –50 270˚ 2484 –1.6 –0.9 –3.0 45˚ 90˚ 135˚ 225˚ 180˚ Vertical polarization 2442 Frequency(MHz) 2400 –16.1 –16.0 Average(dBi) –10.5 –11.3 Maximum(dBi) –26.9 –26.5 Minimum(dBi) 315˚ 45˚ 270˚ 90˚ 0˚ 10 (dBi) 0 –10 –20 –30 –40 –50 0˚ 10 (dBi) 0 –10 –20 –30 –40 –50 2400MHz 2442MHz 2484MHz 2484 –16.4 –11.7 –31.9 45˚ 90˚ 90˚ Y 0˚ Z X 135˚ 225˚ 180˚ Vertical polarization 2442 Frequency(MHz) 2400 –17.5 –16.8 Average(dBi) –11.1 –10.4 Maximum(dBi) –30.4 –36.3 Minimum(dBi) 315˚ Z 90˚ Y 270˚ X 270˚ 0˚ 10 (dBi) 0 –10 –20 –30 –40 –50 0˚ 225˚ 2400MHz 2442MHz 2484MHz 2484 –17.0 –10.4 –53.3 180˚ Vertical polarization 2442 Frequency(MHz) 2400 –4.3 –3.6 Average(dBi) 1.6 2.5 Maximum(dBi) –21.9 –24.0 Minimum(dBi) 315˚ 45˚ 270˚ 90˚ 135˚ 180˚ Vertical polarization 2442 Frequency(MHz) 2400 –18.7 –18.6 Average(dBi) –14.8 –15.0 Maximum(dBi) –26.3 –25.3 Minimum(dBi) 2400MHz 2442MHz 2484MHz 2484 –19.8 –16.7 –29.1 135˚ 225˚ 225˚ 0˚ 10 (dBi) 0 –10 –20 –30 –40 –50 2400MHz 2442MHz 2484MHz 2484 –4.2 2.0 –25.5 45˚ 90˚ 135˚ 180˚ Vertical polarization 2442 Frequency(MHz) 2400 –3.9 –3.3 Average(dBi) –0.5 0.2 Maximum(dBi) –29.4 –28.7 Minimum(dBi) 2400MHz 2442MHz 2484MHz 2484 –4.0 –0.3 –34.7 • Tested antenna has been soldered. Evaluation board size is 50×10×1 mm3. • All specifications are subject to change without notice. 001-01 / 20140228 / rf_ant_ant016008lcs2442ma2_en.fm