FV5M-08 High Voltage Fast Recovery Rectifiers HIGH VOLTAGE RECTIFIERS 5mAMPERES 8000 VOLTS Features: *Low Forward Voltage *Low Switching Noise *High Surge Capacity *Diffused-Junction *Low Power Loss & High Efficency Mechanical Data: FV5M-1 *Case: Molded Plastic *Lead:Plated, Axial Leads, Solderable per MIL-STD-202, Method 208 *Polarity:Cathode Indicate by Color Band *Weight: 0.17 grams FV5M-1 Outline Dimensions Unit:mm Axial Device (Through-Hole) A A B C D Dim FV5M-1 Min 27.00 WEITRON http//www.weitron.com.tw A Max - Min 6.50 B Max 6.70 Min 0.47 C Max 0.53 Min 2.30 D Max 2.70 FV5M-08 Maximum Rating (TA=25 C Unless Otherwise Noted) Symbol Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage FV5M-08 UNIT VRRM VRWM VR 8000 V VR(RMS) 5600 V Average Rectifier Forward Current ( L=9.5mm, TA=55 C) IF(AV) 5 Non-Repetitive Peak Square Current Surge Applied at Rated Load Condition Half Wave, Single Phase, 60Hz (JEDEC Method) IFSM 0.5 A Operating Juntion and Storage Temperature Range Tj, TSTG -40 to +120 C Electrical Characteristic (TA=25 C Unless Otherwise Noted) mA Characteristic Symbol MAX UNIT Maximum Instanatneous Forward Voltage (IF=10mA) VF 25 V Maximum Instantaneous Reverse Current (Rated DC Voltage, Tc=25 C) IR A 5.0 Typical Reverse Recovery Time (Note1) Trr 80 nS Typical Junction Capacitance (VR=4.0V, f=1.0MHz) CJ 1.0 PF NOTE: 1. Reverse Recovery Test Conditions: IF =2mA, IR =4mA, IR R =1mA WEITRON http//www.weitron.com.tw FV5M-08 D.U.T 0.01uF IF = 2 mA VR 150 K 1K 1 mA 100 Trr OSCILLOSCOPE IF(mA) 25 FIG. 1 TYPICAL INSTANEOUS FORWARD CHARACTERISTICS IR(uA) FIG. 2 TYPICAL REVERSE CHARACTERISTICS 1.0 Ta=100 C Ta=25 C 20 Ta=100 C 0.1 15 10 Ta=25 C 0.01 5 0 10 20 30 40 VF (V) CJ 0.001 2 10 4 6 FIG. 3 TYPICAL JUNCTION CAPACITANCE (PF) 0.6 Ta=25 C f =1MHz 0.4 0.2 0 50 WEITRON http://www.weitron.com.tw 100 150 200 Vr(V) 20 30 40 VF (V) 8 10 12 VR (Kv)