DATA SHEET WIRELESS COMPONENTS Ceramic Patch Antenna ANT2525B00DT2300A SDARS Product Specification –October 22, 2013 V.0 PIN 25 × 25 × 4 mm Product specification WIRELESS COMPONENTS FEATURES High radiation efficiency Pin-solder process RoHS compliant 2 6 Ceramic Patch Antenna ORDERING INFORMATION All part numbers are identified by the series, packing type, material, size, antenna type, working frequency and packing quantity. PART NUMBER APPLICATIONS SDARS system ANT 2525 B (1) (2) (3) 00D T 2300A (4) (5) (6) (1) PRODUCT ANT = Antenna (2) SIZE 2525=25 x 25 mm (3) ANTENNA TYPE B = Bulk Antenna (4) SERIAL NO. 00D (5) PACKING STYLE T = Tray (6) WORKING FREQUENCY 2300 = 2.3 GHz PHYCOMP CTC CAN43134250D2301B 12NC 43134250D230 www.yageo.com Oct. 22, 2013 V.0 Product specification WIRELESS COMPONENTS Ceramic Patch Antenna 3 6 SPECIFICATION Table 1 DESCRIPTION Operating Frequency VALUE 2320-2345 MHz Bandwidth 72 MHz (Typ.) Gain 7.5 dBic (Typ.) VSWR Polarization Axis Ratio Beam Width Impedance Operating Temperature 2.0 Max.. Left Hand Circular Polarization 6 dB (Typ.) > 120 degrees 50Ω -40~105 °C NOTE 1. Based on 70×70 mm² square ground plane. 2. Centre frequency will be offset to working frequency while changes of customer's housing and ground plane. 3. Please contact local sales if you need customized design to gain optimum antenna performance. Fig. 1 Mechanical Data Fig. 2 Evaluation Board www.yageo.com Oct. 22, 2013 V.0 Product specification WIRELESS COMPONENTS Ceramic Patch Antenna 4 6 ELECTRICAL PERFORMANCES Fig. 3 Return loss Fig. 4 Smith Chart www.yageo.com Oct. 22, 2013 V.0 Product specification WIRELESS COMPONENTS Ceramic Patch Antenna 5 6 Fig. 5 Radiation Pattern (Frequency = 2332MHz) www.yageo.com Oct. 22, 2013 V.0 Product specification WIRELESS COMPONENTS 6 6 Ceramic Patch Antenna REVISION HISTORY REVISION DATE Version 0 CHANGE NOTIFICATION Oct. 22, 2013 - DESCRIPTION - New data sheet for Patch antenna, PIN Feed size 25×25×4 mm www.yageo.com Oct. 22, 2013 V.0