Through-hole resistors Fusible Thermal & Vertical Lead Type Cement Resistors Normal Style [ FTR Series ] FEATURES Rated Current 2A, 3A, 5A, 10A Resistance Tolerance ±5%, ±10% T.C.R ±250ppm/°C INTRODUCTION The material used and the construction techniques ensure excellent flame resistance, arc resistance and moisture resistance as well as self-extinguishing capabilities. They will withstand the most rigorous loading test, also provide outstanding feature against surges, suitable for the prevention of inrush current for switching regulators. DIMENSIONS Unit: mm W S H 4.5+2/-1 08±0.1 P ød2 STYLE DIMENSION Normal H W S P FTR100 25±1.5 13±1.0 9.0±1.0 5.0±1.0 FTR200 38±1.5 13±1.0 9.0±1.0 5.0±1.0 FTR300 35±1.5 16±1.0 12±1.0 7.5±1.0 ød2 0.6±0.1 75 Note: ELECTRICAL CHARACTERISTICS STYLE FTR100 / 200 / 300 STANDARD FUSING STANDARD RESISTANCE POWER RATING AT 70°C (W) CURRENT (A) TEMPERATURE (°C) VOLTAGE (V) RANGE FTR100 FTR200 FTR300 10A 1.2 1.4 2.0 129±4 1.6 2.0 2.5 152±4 1.6 2.0 2.5 188+3/-1 2.0 2.4 3.5 226+1/-3 2.0 2.4 3.5 129±3 1.6 2.2 - 187+1/-3 2.1 2.4 - 3A 145±4 1.6 2.2 - 2A 95+3/0 0.8 1.2 - 110±4 1.2 1.4 - 126±4 1.4 1.6 - 130±4 1.6 2.1 - 135±4 1.8 2.2 - 145±4 2.1 2.4 - 5A 109+1/-3 250 1Ω - 10KΩ Note: Special value is available on request ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD APPRAISE Short Time Overload IEC 60115-1 4.13 2.5 times RCWV for 5 Sec. ±2.0%+0.05Ω Temperature Coefficient IEC 60115-1 4.8 -25°C to +125°C By type Robustness of Terminations IEC 60115-1 4.16 Direct load for 10 Sec. In the direction of the terminal leads ≥25N Damp Heat Steady State IEC 60115-1 4.24 40±2°C, 90-95% RH for 56 days, loaded with 0.1 times RCWV ±5.0%+0.1Ω Note: RCWV(Rated Continuous Working Voltage) = Power Rating x Resistance Value or Max. working voltage listed above, whichever less. Revision: 201304 88 Explanations Of Ordering Code MFR -12 F Code 7 Tolerance T F Code 8 Packing Style Code 9 Temperature Coefficient of Resistance Code 1 - 3 Series Name Code 4 - 6 Power Rating See Index -05= ød0.5mm P= ±0.02 % T = Tape/Box -06 = ød0.6mm A= ±0.05 % R = Tape/Reel - = Base on Spec. -07 = ød0.7mm B= ±0.1 % B = Bulk 52- 100R Code 10 - 12 Forming Type Code 13 - 17 Resistance Value 26- = 26mm 0R1=0.1 52- = 52.4mm 100R=100 A = ±5 ppm/°C 73- = 73mm 10K=10,000 81- = 81mm 10M=10,000,000 -08 = ød0.8mm C= ±0.25% B = ±10 ppm/°C -10 = ød1.0mm D= ±0.5 % C = ±15 ppm/°C 91- = 91mm -14 = ød1.4mm F = ±1 % S = ± 20ppm/°C F = F Type -12 = 1/6W G= ±2 % D = ±25 ppm/°C FK = FK Type -25 = 1/4W J = ±5 % E = ±50 ppm/°C FKK= FKK Type 25S = 1/4WS K= ±10 % F = ±100 ppm/°C FFK= F-form Kink -50 = 1/2W - = Base on Spec. G = ±200 ppm/°C M = M-Type Forming 50S = 1/2WS H = ±250 ppm/°C MB = M-form W/flat 100 = 1W I = ±300 ppm/°C MT = MT Type Forming 1WS = 1WS J = ±350 ppm/°C MR = MR Type 200 = 2W AV = AVIsert 2WS = 2WS PN = PANAsert 204 = 0.4W 207 = 0.6W 300 = 3W 3WS = 3WS 3WM= 3WM 400 = 4W 500 = 5W 5WS = 5WS 5SS = 5WSS 700 = 7W 7WS = 7WS 10A = 10W 20A = 20W 30A = 30W 40A = 40W 50A = 50W 10S = 10WS 15A = 15W 25A= 25W 10B = 100W 25B = 250W EXCEPTION: • Cement series: • JPW series: <Code 8>: Special packing style code B: B ulk with wirewound or metal oxide sub-assembly for resistance value W: Bulk with ceramic based wirewound sub-assembly for resistance value M: Bulk with metal oxide sub-assembly for resistance value F: Bulk with Fiberglass based wirewound sub-assembly for resistance value <Code 10-12>: Without forming code Example: SQP500JB-10R <Code 13-17>: without resistance value code Example: JPW-06-T-52-