8 5 6 7 4 1. 2. 3. D 4. 5. 6. 7. 8. 2 3 NOTES: ECN # DESIGN: Lens mounts the Litepipe securely to display panel providing 180 viewing angle MOUNTING: Panel mounting hole .250 (6.35mm) on 3/8" centers PANEL THICKNESS: For CLB 300 and SQB 400: 1/32" to 1/4". For Panels less than 3/16" use SPC 125 LENS LOCK: Insert Litepipe into lens aligning the tabs with the lens slot Standoff used to adjust the height of a standard LED above the PCB and maintain a maximum .050" clearance between the Litepipe and LED. Length is from front of panel to LED Custom lengths available upon request (Minimum order quantity may apply) U.S. & Foreign Pat. Issued and Pend. 1 REVISIONS REV DESCRIPTION N/A INITIAL RELEASE 001 REVISED PER ECN111009AZ01 DATE 1/25/96 4/23/10 INITIALS JS KH D LENS LOCKING TAB 4. .23 (5.84mm) LENSES (ORDER SEPERATELY SPACER (ORDER SEPERATELY A C A C CLB 300 .32 (8.13mm) .040 (1.016mm) SQB 400 SPC 125 .20 (5.08mm) B B ODERING CODE: XXX LCV XXX CTP A LENGTH CODE 036 = .360" 056 .560" 076 .760" 096 .960" 116 1.160" 136 1.360" SECTION A-A COLOR CTP CLEAR UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES: ANGLES 1' FINISH BREAK ALL CORNERS AND SHARP EDGES .030 MAX MATERIAL VISUAL COMMUNICATIONS COMPANY, INC. ACRYLIC (OPTICAL GRADE) U.L. 94-HB FINISH 5MM ROUND LITEPIPE DATE APPROVAL THIRD ANGLE PROJECTION PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF VISUAL COMMUNICATIONS COMPANY, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF VISUAL COMMUNICATIONS COMPANY, INC IS PROHIBITED. 7 6 5 4 3 190 Bosstick Boulevard, Suite101 San Marcos, CA 92069 USA Phone (760) 560-1300 Fax (760) 560-1301 email [email protected] TITLE: SEE NOTES CUSTOM LENGTHS AVAILABLE UPON REQUEST (SEE NOTE7) 8 DECIMALS .X .020 .010 .XX .XXX .005 DRAWN K.Howard 4/23/10 CHECKED DPZ 5/4/10 SIZE SCALE: 6:1 DO NOT SCALE DRAWING 2 REV DWG. NO. B LCV XXX CTP 001 SHEET 1 OF 1 1 A