8 D 7 5 6 4 2 3 1 REVISIONS NOTES 1. ROHS COMPLIANT -40 C TO 85 C OPERATING TEMPERATURE 2. 3. SUITABLE FOR LIGHT PIPE WITH 2.2MM JACKET AND OPTICAL CORE NO GREATER THAN 1.5MM. 4. DO NOT INSTALL PRIOR TO SOLDERING FOR BEST RESULTS USE ONLY NARROW VIEWING ANGLE NON-DIFFUSED LEDS WITH OUTPUT 5. POWER GREATER THAN 100mcd ECN # 177 200 REV DESCRIPTION 001 INITIAL RELEASE 002 REVISED PER ECR 100610KH010 DATE 8/3/10 10/6/10 INITIALS KH KH D .154 (3.912mm) .197 (5.004mm) .079 (2.007mm) .11 (2.794mm) C C .146 (3.708mm) B .276 (7.010mm) .201 (5.105mm) FOR .063 THK PCB B TRIMMED FIBER OPTIC JACKET .079 (2.007mm) .06±.02 (1.52mm 0.51) FIBER OPTIC .315 (8.001mm) A BOARD MOUNT LED UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES: ANGLES 1/2'' FINISH 128 BREAK ALL CORNERS AND SHARP EDGES .030 MAX RECOMMENDED PWB DEVICE LAYOUT VISUAL COMMUNICATIONS COMPANY, INC. NYLON 6/6, BLACK UL 94-V2 190 Bosstick Boulevard, Suite101 San Marcos, CA 92069 USA Phone (760) 560-1300 Fax (760) 560-1301 email [email protected] FINISH TITLE: SEE NOTES THIRD ANGLE PROJECTION PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF VISUAL COMMUNICATIONS COMPANY, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF VISUAL COMMUNICATIONS COMPANY, INC IS PROHIBITED. 7 6 5 4 3 SURFACE MOUNT LED MOUNT DATE APPROVAL LIGHT PIPE PREPARATION/INSTALLATION 8 MATERIAL DECIMALS .X .020 .010 .XX .XXX .005 DRAWN KH 8/3/10 CHECKED DPZ 8/10/10 SIZE SCALE: 4:1 DO NOT SCALE DRAWING 2 REV DWG. NO. B SMD 22 002 SHEET 1 OF 1 1 A