ESAD25M-02D thru ESAD25M-06D - Thinki Semiconductor Co.,Ltd.

ESAD25M-02D thru ESAD25M-06D
®
Pb
ESAD25M-02D/ESAD25M-04D/ESAD25M-06D
Pb Free Plating Product
16 Ampere Insulated Tandem Polarity Fast Recovery Half Bridge Rectifiers
Features
Latest GPP technology with super fast recovery time
Low forward voltage drop
Glass passivated with high current capability
Low reverse leakage current
High surge current capability
Unit : inch (mm)
TO-3PF/TO-3P(H)IS
.217 (5.5)
.130 (3.3)
.610 (15.5)
.177
(4.5)
.378
(9.6)
.965
(24.5)
Application
Automotive Inverters/Solar Inverters
Plating Power Supply,SMPS,Motor Control and UPS
Car Audio Amplifiers and Sound Device Systems
.177
(4.5)
.720
(18.3)
Min
Mechanical Data
Case: TO-3PF isolated package by fully molding
Epoxy: UL 94V-0 rate flame retardant
Terminals: Solderable per MIL-STD-202
method 208
Polarity: As marked on diode body
Mounting position: Any
Weight: 6.0 gram approximately
.215 (5.47)
.138 (3.5)
Case
Case
Case
Case
Series Connection
Doubler
Negative
Positive
Common Cathode Common Anode Tandem Polarity Tandem Polarity
Suffix "S"
Suffix "N"
Suffix "D"
Suffix "C"
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
o
Rating at 25 C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOL
ESAD25M-02D ESAD25M-04D ESAD25M-06D UNIT
Maximum Recurrent Peak Reverse Voltage
VRRM
200
400
600
V
Maximum RMS Voltage
VRMS
140
280
420
V
Maximum DC Blocking Voltage
VDC
200
400
600
V
Maximum Average Forward Rectified
16.0
IF(AV)
o
Current TC=100 C
A
Peak Forward Surge Current, 8.3ms single
Half sine-wave superimposed on rated load
IFSM
175
VF
0.98
150
A
(JEDEC method)
Maximum Instantaneous Forward Voltage
@ 8.0 A
1.3
o
Maximum DC Reverse Current @TJ=25 C
o
At Rated DC Blocking Voltage @TJ=125 C
IR
uA
100
uA
nS
Trr
35
Typical junction Capacitance (Note 2)
CJ
90
Operating Junction and Storage
Temperature Range
V
5.0
Maximum Reverse Recovery Time (Note 1)
Typical Thermal Resistance (Note 3)
1.7
R JC
2.2
TJ, TSTG
-55 to + 150
pF
o
C/W
o
C
NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A.
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC.
(3) Thermal Resistance junction to case.
Rev.05
© 2006 Thinki Semiconductor Co., Ltd.
Page 1/2
http://www.thinkisemi.com/
ESAD25M-02D thru ESAD25M-06D
®
FIG.2 - MAXIMUM NON-REPETITIVE
PEAK FORWARD SURGE CURRENT
FIG.1 - FORWARD CURRENT DERATING CURVE
200
PEAK FORWARD SURGE CURRENT,
AMPERES
AVERAGE FORWARD RECTIFIED
CURRENT, AMPERES
16
13
10
8
6
4
60 Hz Resistive or
Inductive load
Pulse Width 8.3ms
Single Half-Sire-Wave
(JEDEC Method)
175
150
125
100
75
50
25
0
0
0
50
100
150
1
100
NUMBER OF CYCLES AT 60Hz
o
CASE TEMPERATURE, C
FIG.4 - TYPICAL REVERSE CHARACTERISTICS
FIG.3 - TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
1000
80
INSTANTANEOUS REVERSE CURRENT,
MICROAMPERES
IINSTANTANEOUS FORWARD CURRENT,
AMPERES
10
ESAD25M-02D
ESAD25M-04D
8
ESAD25M-06D
0.1
o
TJ=25 C
PULSE WIDTH=300uS
1% DUTY CYCLE
0.01
0.2
0.4
0.6
0.8
1.0
1.2
1.4
o
TJ=125 C
100
10
o
TJ=25 C
1
0.1
0
1.6
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
20
40
60
80
100
PERCENT OF RATED PEAK REVERSE VOLTAGE,%
FIG.5 - TYPICAL JUNCTION CAPACITANCE
JUNCTION CAPACITANCE, pF
1000
o
TJ = 25 C
f = 1.0 MHZ
Vsig = 50mVp-p
100
10
0.1
1.0
4.0
10
100
REVERSE VOLTAGE, VOLTS
Rev.05
© 2006 Thinki Semiconductor Co., Ltd.
Page 2/2
http://www.thinkisemi.com/