SKiiP 13AC12T4V1 Absolute Maximum Ratings Symbol Conditions Values Unit Inverter - IGBT VCES IC Tj = 25 °C Tj = 175 °C Ts = 25 °C Ts = 70 °C ICnom ICRM MiniSKiiP® 1 VGES tpsc Tj ICRM = 3 x ICnom VCC = 800 V VGE ≤ 15 V VCES ≤ 1200 V 1200 V 41 A 34 A 25 A 75 A -20 ... 20 V 10 µs -40 ... 175 °C Ts = 25 °C 32 A Ts = 70 °C 26 A 25 A Tj = 150 °C Inverse - Diode SKiiP 13AC12T4V1 IF Tj = 175 °C IFnom Features • Trench 4 IGBT´s • Robust and soft freewheeling diodes in CAL technology • Highly reliable spring contacts for electrical connections • UL recognised file no. E63532 Typical Applications* • Inverter up to 14 kVA • Typical motor power 7,5 kW Remarks • VCEsat , VF= chip level value • Case temp. limited to TC = 125°C max. (for baseplateless modules TC = TS) • Product rel. results valid for Tj ≤ 150 (recomm. Top = -40 … +150°C) IFRM IFRM = 3xIFnom 75 A IFSM 10 ms, sin 180°, Tj = 150 °C 100 A -40 ... 175 °C Tj Module It(RMS) Tterminal = 80 °C, 20A per spring Tstg Visol AC sinus 50Hz, t = 1 min 40 A -40 ... 125 °C 2500 V Characteristics Symbol Conditions Inverter - IGBT IC = 25 A VCE(sat) VGE = 15 V chiplevel VCE0 rCE VGE = 15 V min. typ. max. Unit Tj = 25 °C 1.85 2.10 V Tj = 150 °C 2.25 2.45 V Tj = 25 °C 0.8 0.9 V Tj = 150 °C 0.7 0.8 V Tj = 25 °C 42 48 m Tj = 150 °C 62 66 m 5.8 6.5 V Tj = 25 °C 0.1 0.3 mA f = 1 MHz 1.43 nF f = 1 MHz 0.12 nF f = 1 MHz 0.09 nF 142 nC VGE(th) VGE = VCE, IC = 1 mA ICES VGE = 0 V VCE = 1200 V Cies Coes Cres VCE = 25 V VGE = 0 V QG - 8 V...+ 15 V RGint Tj = 25 °C td(on) Eoff VCC = 600 V IC = 25 A RG on = 39 RG off = 39 di/dton = 465 A/µs di/dtoff = 350 A/µs VGE = +15/-15 V Rth(j-s) per IGBT tr Eon td(off) tf 5 mA Tj = 150 °C 0.00 44 ns Tj = 150 °C 46 ns Tj = 150 °C 3.7 mJ Tj = 150 °C 330 ns Tj = 150 °C 62 ns Tj = 150 °C 2.4 mJ 1 K/W AC © by SEMIKRON Rev. 3 – 02.12.2011 1 SKiiP 13AC12T4V1 Characteristics Symbol Conditions Inverse - Diode VF = VEC IF = 25 A VGE = 0 V chiplevel VF0 rF MiniSKiiP® 1 IRRM Qrr Err Rth(j-s) SKiiP 13AC12T4V1 IF = 25 A di/dtoff = 640 A/µs VGE = -15 V VCC = 600 V per Diode min. typ. max. Unit Tj = 25 °C 2.4 2.7 V Tj = 150 °C 2.5 2.8 V Tj = 25 °C 1.3 1.5 V Tj = 150 °C 0.9 1.1 V Tj = 25 °C 44 50 m Tj = 150 °C 62 68 m Tj = 150 °C 19 A Tj = 150 °C 4 µC Tj = 150 °C 1.64 mJ 1.52 K/W Module Ms to heat sink w Features Temperatur Sensor • Trench 4 IGBT´s • Robust and soft freewheeling diodes in CAL technology • Highly reliable spring contacts for electrical connections • UL recognised file no. E63532 R100 TC=100°C (R25=1000) R(T) R(T)=1000[1+A(T-25°C)+B(T-25°C)2 ], A = 7.635*10-3 °C-1, B = 1.731*10-5 °C-2 2 2.5 Nm 35 g 1670 ± 3% Typical Applications* • Inverter up to 14 kVA • Typical motor power 7,5 kW Remarks • VCEsat , VF= chip level value • Case temp. limited to TC = 125°C max. (for baseplateless modules TC = TS) • Product rel. results valid for Tj ≤ 150 (recomm. Top = -40 … +150°C) AC 2 Rev. 3 – 02.12.2011 © by SEMIKRON SKiiP 13AC12T4V1 Fig. 1: Typ. output characteristic, inclusive RCC'+ EE' Fig. 2: Rated current vs. temperature IC = f (TS) Fig. 3: Typ. turn-on /-off energy = f (IC) Fig. 4: Typ. turn-on /-off energy = f (RG) Fig. 5: Typ. transfer characteristic Fig. 6: Typ. gate charge characteristic © by SEMIKRON Rev. 3 – 02.12.2011 3 SKiiP 13AC12T4V1 Fig. 7: Typ. switching times vs. IC Fig. 8: Typ. switching times vs. gate resistor RG Fig. 9: Transient thermal impedance of IGBT and Diode Fig. 10: CAL diode forward characteristic Fig. 11: Typ. CAL diode peak reverse recovery current Fig. 12: Typ. CAL diode recovery charge 4 Rev. 3 – 02.12.2011 © by SEMIKRON SKiiP 13AC12T4V1 pinout, dimensions pinout This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, Chapter IX * The specifications of our components may not be considered as an assurance of component characteristics. Components have to be tested for the respective application. Adjustments may be necessary. The use of SEMIKRON products in life support appliances and systems is subject to prior specification and written approval by SEMIKRON. We therefore strongly recommend prior consultation of our staff. © by SEMIKRON Rev. 3 – 02.12.2011 5