6610 Connectors (Inlets/Outlets) www.schurter.com/PG07 IEC Appliance Outlet F, Snap-in Mounting, Front Side, IDC Terminal Arrangement "cross" (wires cross to pin axis) Arrangement "along", view from rear side (wires along to pin axis) 6610 with integrated Light Pipe F 70° C Description -Panel Mount: Snap-in version, from front side -Connector, Pin temperature 70 °C, Protection class I -Wire gauge 1-1.5mm²/1.5mm²/2.5mm²/14AWG/12AWG -IDC terminals acc. to IEC 60998-2-3 for solid wires Approvals -ENEC File Number: 40035679 -UL File Number: E103791 -CCC File Number: 2010010204418560 Characteristics -IDC technology for efficient and cost saving mounting Protection cover can be used as "wire press" -Live contact available as IDC, solder or quick connect terminal -Suitable for use in equipment according to IEC/UL 60950 Other versions on request -UL approval for AWG 16; Versions for other wire gauges -Protection class II, 70°C Weblinks pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, REACH, Mating Connectors, e-Shop, SCHURTER-Stock-Check, Distributor-StockCheck, CAD-Drawings, Accessories, Detailed request for product Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. The integration of light pipes in the appliance outlet provides status indication in smart PDUs. See Application Note for more information. Application Note Technical Data Ratings IEC Ratings UL/CSA Allowable Operation Temp. Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing 10 A / 250 VAC; 50 Hz 15 A / 250 VAC; 60 Hz -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 IDC terminals Snap-in,0.8/1/1.2/1.5/2/2.5/3.0 mm (other on request) Thermoplastic, black, UL 94V-0 Appliance Outlet F acc. to IEC 60320 UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I Connectors 1 6610 Connectors (Inlets/Outlets) www.schurter.com/PG07 Dimensions Version "cross" (wires cross to pin axis) L/N/PE: IDC terminals 32.3 ±0.10 28 24.8 0 +0.20 35.8 4 .R ax m R 30 5 2. 3 s Version "along" (wires along to pin axis) L/N/PE: IDC terminals 30 3 +0.20 0 28 m 4 Connectors s .R 5 2. ax R 2 32.8 24.3 ±0.10 35.8 6610 Connectors (Inlets/Outlets) www.schurter.com/PG07 Version "cross" (wires cross to pin axis) N/PE: IDC terminals, L: quick connect or solder terminal 41.9 1) 32 ±0.10 3 24 ±0.10 N L 28 9.5 R6 6.3±0.10 30 R5 0.5 35.8 R 5 2. s m 32.3 ±0.10 ax 4 24.8 0 +0.20 .R 1) Other options: Quick connect terminal 4.8x0.8: Solder terminal: 40.3 mm 40.9 mm Version "along" (wires along to pin axis) N/PE: IDC terminals, L: quick connect or solder terminal 35.8 32 ±0.10 7 N L R5 5.4 28 24 ±0.10 R6 R 5 2. 6.3±0.10 m +0.20 0 32.8 4 30 24.3 ±0.10 .R s 3 41.9 1) ax Connectors 3 6610 Connectors (Inlets/Outlets) www.schurter.com/PG07 Light Pipe integration 21.0 29.8 Ø 1.5 Ø 3.0 27.8 Arrangement of light pipes in the outlet and LEDs on the PCB. For more information, see the relevant Application Note. The integration of light pipes in the appliance outlet provides status indication in smart PDUs. See Application Note for more information. Application Note Assembly Instructions Mounting tool version "cross" 5.4 ± 0.05 1.5 min. 8 +0.10 0 6.65 ±0.05 13.1±0.10 22.5 ±0.10 3.5 14 ±0.10 - The above mentioned dimensions are recommended when using an assembly tool. - When using an assembly tool we recommend the above-mentioned dimensions. - Use the cover or an assembly tool, to push the wires into the IDC terminals. - The assembly force depends on the wire used and may require as much as 900 N. - Press the wires into the IDC terminals until the wires touch with the plastic socket of the 6610 when using a tool. - When using the cover be sure that it is properly mounted. - The maximum diameter of the wire (including insulation) is 3.6 mm for along, 3.5 mm for cross version. - The correct installation of the wires is essential for proper function of the 6610 in the end equipment. All Variants Alignment 1) Conductor cross section Panel Thickness s [mm] along 1.0 - 1.5 mm² along along Terminal type live contact Order Number 2.5 IDC terminals 6610.3016.03 1.5 mm² / 14 AWG 1.5 IDC terminals 6610.5014 1.5 mm² / 14 AWG 1.5 IDC terminals 6610.5014.03 along 1.5 mm² / 14 AWG 2 IDC terminals 6610.5015 along 2.5 mm² / 12 AWG 0.8 IDC terminals 6610.1011 along 2.5 mm² / 12 AWG 1 IDC terminals 6610.1012 along 2.5 mm² / 12 AWG 1.2 IDC terminals 6610.1013 along 2.5 mm² / 12 AWG 1.5 IDC terminals 6610.1014 along 2.5 mm² / 12 AWG 2 IDC terminals 6610.1015 along 2.5 mm² / 12 AWG 2 IDC terminals 6610.1015.03 along 2.5 mm² / 12 AWG 2.5 IDC terminals 6610.1016 along 2.5 mm² / 12 AWG 3 IDC terminals 6610.1017 along 2.5 mm² / 12 AWG 1.5 Quick connect terminal 6.3 x 0.8 6610.1254 along 2.5 mm² / 12 AWG 1.5 Quick connect terminal 6.3 x 0.8 6610.1254.03 4 1 .R + 0.10 0 3.5 6 ± 0.10 6 ± 0.10 2.8 m ax +0.10 0 2.8 30 ± 0.10 Connectors █ █ █ █ + 0.10 0 5.4 ± 0.05 1.5 min. 8 4.55 ± 0.05 2.45 ± 0.05 9.45 ± 0.05 Mounting tool version "along" 6610 Connectors (Inlets/Outlets) www.schurter.com/PG07 Alignment 1) Conductor cross section Panel Thickness s [mm] Terminal type live contact Order Number along 2.5 mm² / 12 AWG 1.5 Solder 6610.1154 cross 1.5 mm² / 14 AWG 1 IDC terminals 6610.6012 cross 1.5 mm² / 14 AWG 1.5 IDC terminals 6610.6014 cross 1.5 mm² / 14 AWG 1.5 Quick connect terminal 6.3 x 0.8 6610.6254 cross 2.5 mm² / 12 AWG 1 IDC terminals 6610.2012 cross 2.5 mm² / 12 AWG 1.2 IDC terminals 6610.2013 █ cross 2.5 mm² / 12 AWG 1.5 IDC terminals 6610.2014 cross 2.5 mm² / 12 AWG 1.5 IDC terminals 6610.2014.03 cross 2.5 mm² / 12 AWG 2 IDC terminals 6610.2015 cross 2.5 mm² / 12 AWG 2.5 IDC terminals 6610.2016 cross 2.5 mm² / 12 AWG 3 IDC terminals 6610.2017 cross 2.5 mm² / 12 AWG 1.5 Quick connect terminal 6.3 x 0.8 6610.2254 cross 2.5 mm² / 12 AWG 1.5 Solder 6610.2154 █ █ Most Popular. Availability for all products can be searched real-time:http://www.schurter.com/en/Stock-Check/Stock-CheckSCHURTER Articles for 1-1.5mm² only with ENEC approval. Outer diameter of wire (including insulation) max. 3.5 / 3.6 mm. 1) The alignment describes whether the wires are along or across to the connector pin axis. Suffix ".03" corresponds to the version with V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Packaging unit 50 Pcs Accessories Description Cord retaining kits Cord retaining strain relief Flat head, E 4700.0005 Flat head, G 4700.0007 Mating Inlets/Plugs Category / Description Plug Overview complete IEC Plug E, Cord Connector (Rewireable), Straight, max. cable Diameter 8.5 mm 4732 IEC Plug E, Cord Connector (Rewireable), Straight, max. Cable Diameter 10 mm 4735 IEC Plug E, Cord Connector (Rewireable), Straight 9009 IEC Plug E, Cord Connector (Rewireable), Angled, max. Cable Diameter 8.5 mm 4733 IEC Plug E, Cord Connector (Rewireable), Angled, max. Cable Diameter 10 mm 4736 Plug further types to 6610 ... Connectors 5 6610 Connectors (Inlets/Outlets) www.schurter.com/PG07 Mating Inlets/Plugs shuttered Interconnection Cord Overview complete VAC13KS, Interconnection, 2.0 m, Connector IEC C13, cord end: 6051.2007 VAC13KS, Interconnection, 3.0 m, Connector IEC C13, cord end: 6051.2087 VAC13KS, Interconnection, 1.5 m, Connector IEC C13, cord end: 6051.2067 Interconnection Cord further types to 6610 24.08.2015 6 Connectors The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.