KP (Switch) Power entry modules without line filter www.schurter.com/PG05 IEC Appliance Inlet C14 with Line Switch 1- or 2-pole Inlet with line switch KPF Filter Module (not enclosed) C14 70° C Description -Panel Mount: Sandwich/rear-side -2 Functions: Appliance Inlet Protection class I, Line Switch 1‑ and 2‑ pole -For PCB mounting Approvals -Approval Reference Type: KP01 -VDE Certificate Number: 40029369 -UL File Number: E96454 -CSA File Number: 38456 -CCC File Number: 2013010204592940 Characteristics -Panel mount from rear or "sandwich" between top and bottom/side to side panels PCB mount with snap-in or screw-on feet (self tapping screws Ø 3 x 8 mm) -All single elements are already wired -Line switch non-illuminated -Insulation cover on the rear-side -Suitable for use in equipment according to IEC/UL 60950 Other versions on request -Solder terminals -Quick-connect terminals -Line switch, illuminated (only 2-pole version) -Line switch with other rocker marking -For protection class II References Alternative: version with line filter KPF We recommend for new applications the new type DC21 Weblinks pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, REACH, Mating Connectors, e-Shop, SCHURTER-Stock-Check, Distributor-StockCheck, CAD-Drawings, Accessories, Detailed request for product Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temp. Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing 10 A / 250 VAC; 50 Hz 15 A / 250 VAC; 60 Hz > 2.3 kVAC between L-N > 2.8 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 For PCB mounting Quick connect terminals 4.8 x 0.8 mm Solder terminal on request Snap-in: 1.5/2/2.5/3 mm Thermoplastic, black, UL 94V-0 Appliance Inlet Line Switch C14 acc. to IEC 60320, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I Rocker switch 1 or 2 pole, non-illuminated, acc. to IEC 61058-1 Technical Details Connectors 1 KP (Switch) Power entry modules without line filter www.schurter.com/PG05 Dimensions Screw-on mounting 56.1 2 31.2 52.1 36.5 2 R2 1.3 1.1 4.5 A 2.5 2 18.5 32 36 27.8 2 0.8 ø 5.9 1.1 1.3 20.2 6.2 53.34 S ±0.1 16 50.1 A = for PCB-thickness 1.2/1.6/2.0/2.4 mm Additional quick connect terminal 4.8 x 0.8 mm Snap-in mounting 56.1 2 31.2 52.1 36.5 2 R2 ø 1.1 0 5.9 -0.1 53.34 S ±0.1 16 50.1 Additional quick connect terminal 4.8 x 0.8 mm s = panel thickness 2 Connectors 4.5 1.3 1.1 1.6 ±0.1 2.9 2 4.5 18.5 32 36 27.8 2 0.8 1.3 20.2 6.2 KP (Switch) Power entry modules without line filter www.schurter.com/PG05 oFr combinations: Inlet/switch 1-pole, inlet/fuseholder 1-pole For 2-pole inlet/switch, 2-pole inlet fuseholder and inlet/outlet 53.34 25.4 1.6 D2 D2 7.55 D1 X ±0.1 d1 = 6 ± 0.05 für (snap-in) d1 = 3.6 (screw-on) d2 = 2.1 + 0.1/-0 (screw-on) Dimensions without tolerance: ≤ 15 = ± 0.05; ≥ 15 = ± 0,1 S and X see mounting holes Sandwich mounting holes 32.3 ±0.1 32.3 ±0.1 Sandwich mounting holes 18.5 32.3 ±0.1 Mounting holes for backside mounting 1.6 D1 10.16 10.16 +0.1 0 10.16 +0.1 0 3.82 S ±0.1 (16.45) 13.97 27.94 5.08 25.4 7.62 X ±0.1 X ±0.1 52.4 ±0.1 X = 48.4 at S = 1.5 and 2.5 X = 50.4 at S = 2.0 and 3.0 X = 48.4 at S = 1.5 and 2.5 X = 50.4 at S = 2.0 and 3.0 Assembly Instructions Stable snap feet requires minimal insertion force Module must lay flat on the PCB when soldering Connectors 3 KP (Switch) Power entry modules without line filter www.schurter.com/PG05 Screw-on mount uses self-tapping screws Insertion from behind "Sandwich" mounting with split enclosure panels Diagrams L N L N Inlet with line switch All Variants Panel mounting Panel Thickness s [mm] PCB [mm] Line Switch Fuseholder Connector Order Number Snap-in 2 1.6 1-pole - - KP01.1212.11 Snap-in 2 1.6 2-pole - - KP01.1112.11 Snap-in 3 1.6 1-pole - - KP01.1213.11 Snap-in 3 1.6 2-pole - - KP01.1113.11 Screw 2 1.2/1.6/2.0/2.4 1-pole - - KP01.1252.11 Screw 2 1.2/1.6/2.0/2.4 2-pole - - KP01.1152.11 Screw 3 1.2/1.6/2.0/2.4 1-pole - - KP01.1253.11 Screw 3 1.2/1.6/2.0/2.4 2-pole - - KP01.1153.11 █ Most Popular. Availability for all products can be searched real-time:http://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Suffix "21" corresponds to the version with V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Type KP without cover: KP01.XXXX.XX90 Ground Terminal with solder pin: KP01.XXXX.X3XX 4 Connectors █ █ KP (Switch) Power entry modules without line filter www.schurter.com/PG05 Packaging unit 50 Pcs Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to KP (Switch) Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to KP (Switch) ... Mating Outlets/Connectors shuttered Power Cord Overview complete VAC17KS, North America, 2.0 m, Connector C17, cord end: 6051.2801 VAC17KS, Europlug, 2.0 m, Connector IEC C17, cord end: 6051.2803 VAC17KS, Europlug, 2.0 m, Connector IEC C17, cord end: 6051.2813 VAC13KS, Overview, diverse Connector IEC C13, cord end: VAC13KS Power Cord further types to KP (Switch) 24.08.2015 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Connectors 5