DLFL Suppression Chokes www.schurter.com/PG81 Linear/Saturating Choke Description -Linear/saturating choke -THT-terminals -Low noise development by using iron powder toroids instead of conventional iron lamination cores -Flange for mounting onto printed circuit board -Fully potted resign Standards -EN 60938 Technical Data up to 440 VAC 5 - 45 A @ Ta 45 °C 50 Hz THT, Flexible wire 144 - 1423 g UL 94V-0 UL 94V-0 Weblinks pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, REACH, e-Shop, SCHURTER-Stock-Check, Distributor-Stock-Check, Detailed request for product Isolation Voltage Climatic Category Allowable Operation Temp. Dimension Case 25-P 2 kV eff., winding to ambient 25/100/21 acc. to IEC 60068-1 -25 °C to 100 °C Case 47-P 30.8 50 4.8 8 50 32 45.8 2.5 40 3.5 28 1) 5.8 35 1) 2.5 28 1) 32 40 40 40 -Phase angle control circuits with thyristors, triacs or transistors -The choke acts at its optimum when it is mounted directly at the interference originator (thyristor, triac) Rated voltage Rated Current Power Operating Frequency Terminal technic Weight Material: Housing Sealing Compound 8 Applications 3.5 (0.8) 10 35 1) EMC Products (0.8) 10 1 DLFL Suppression Chokes www.schurter.com/PG81 Case 32-P 80 70.8 4 6.8 56 1) 65 65 80 12 4.5 56 1) (0.8) 10 1) Spacing given at pin base % of nominal current Derating Curves Allowed current versus ambient temperature All Variants In [A] Ln [mH] Inductance drop max [%] Rcu [mΩ] Tripped Power Dissipation fRES [MHz] Cx [µF] Copper ø [mm] Weight [g] Housing Packing unit [pcs.] Order Number 5 1 60 120 3 0.8 0.047 1 144 g 25-P 20 DLFL-0125-0501 8 0.5 60 54 3.5 1.32 0.1 1.25 154 g 25-P 20 DLFL-0125-08D5 45 0.2 70 6 12 1.1 1 5 1423 g 32-P 2 DLFL-0132-45D2 12 0.5 60 38 5.5 1.16 0.1 1.7 333 g 47-P 10 DLFL-0147-12D5 16 0.3 60 25 6.4 1.69 0.22 1.8 325 g 47-P 10 DLFL-0147-16D3 25 0.15 60 10 6.3 2.5 0.47 2.36 336 g 47-P 10 DLFL-0147-25D2 35 0.05 60 5.3 6.5 3.5 1.5 1.5 x 4.5 338 g 47-P 10 DLFL-0147-35C5 █ █ █ Most Popular. Availability for all products can be searched real-time:http://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 03.03.2015 Inductance drop at In 2 EMC Products The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.