231529P Fuseholders www.schurter.com/PG999 OU T Shock-Safe Fuseholder, 5 x 20 mm, Fingergrip, NF 250 VAC · 3.4 W / 6.3 A (NF) Description References -IP 68 from front-side -Screw type fuse carrier We recommend for new applications the type FIZ Last order date: 31.12.2013 Fuseholder to 172581 Standards Weblinks pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, REACH, e-Shop, SCHURTER-Stock-Check, Distributor-Stock-Check, Detailed request for product -NF C 93-436 - Model HB13 -Contrôle de Conformité de Qualité (CCQ) Shocks Bumps Salt Mist Dump Heat Climatic Composite Admissible Torque on Fixing Nut Panel Thickness s Iron < mΩ at 20 mV acc. to NF C 20-706 / IEC 60068-2-6, test Fc acc. to NF C 20-706 / IEC 60068-2-27 acc. to NF C 20-729 / IEC 60068-2-29 acc. to NF C 20-711 / IEC 60068-2-11 acc. to NF C 20-604 acc. to NF C 20-619 Phase D max 1.0 Nm max 4 mm 41 mm 16.1+0.2 0 +0.1 0 0 ø 18.5 -2 ø 2.8 SW18 PH 0 ø 24.5 -2 max. 4 15.6 Soldering Methods Contact Resistance Resistance to Vibration ø 16 Dimension 5 x 20 mm Panel Mount, Front Side Fixing Nut Solder 250 VAC 6.3 A (NF) 3.4 W / 6.3 A @ Ta 23 °C IP 68 -40 °C to 125 °C 40/125/56 acc. to IEC 60068-1 Thermoset, black 25 g 0 °C to 60 °C, max. 70% r.h. , Type, Rated voltage, Rated current AS Fuse-Link Mounting Mounting Terminal Rated Voltage Rated current Rated Power Acceptance IEC Degree of Protection Admissible Ambient Air Temp. Climatic Category Material: Socket Unit Weight Storage Conditions Product Marking E- Technical Data 2.8 0 15 -2 0 41-3 Mounting holes All Variants Holder l Cap Degree of Protection Order Number Fingergrip IP 68 7091.6110 Availability for all products can be searched real-time:http://www. schurter.com/en/Stock-Check/Stock-Check-SCHURTER Fuses 1 231529P Bulk (10 pcs.) 2 Fuses 04.12.2014 PH AS E- OU T Packaging Unit Fuseholders www.schurter.com/PG999 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.