0603<1.6 0.8 t=0.36mm> Standard Type SML-E12∗8 Series EXCELEDTM Green(Yellowish Green) Pure Green Emitting Color Yellow Orange Red AlGaInP on GaAs Material Package Size(mm) 1608(0603) 1.6×0.8(t=0.36) SML-E12P8W Part No. SML-E12M8W SML-E12Y8W SML-E12D8W Absolute Maximum Ratings (Ta=25°C) Part No. Green (Yellowish Green) SML-E12Y8W Yellow SML-E12D8W Orange SML-E12U8W Red SML-E12V8W Red :Duty 0.36 Pure Green SML-E12M8W 54 20 100 5 -40 to +85 -40 to +100 Terminal 0.65 SML-E12P8W 1.6 1.2 Peak Forward Reverse Operating Storage forward current voltage temperature temperature current IF VR Topr Tstg IFP (mA) (V) ( C) ( C) (mA) (0.13) (mW) Dimensions (Unit:mm) 0.8 Power Emitting dissipation color PD SML-E12V8W SML-E12U8W 1/10, 1kHz. 0.8 Electrical Optical Characteristics (Ta=25°C) Part No. Resin Color Forward voltage VF Typ. (V) IF ∗ (mA) Reverse current IR Max. (µA) Light wavelength Dominant VR (V) λD Typ. (nm) IF ∗ (mA) 560 SML-E12P8W 572 SML-E12M8W Diffused SML-E12D8W Milky White SML-E12Y8W 2.2 20 10 4 590 605 ( mcd) Min. Typ. (mcd) 2.5 6.3 10 20 Tolerance:±0.1 Brightness IV Directivity (Typ.) IF ∗ (mA) Angular Displacement (deg) X 0° Y 30° 25 25 63 40 100 SML-E12U8W 620 25 63 SML-E12V8W 630 16 40 20 30° 60° 60° 90° 100 Pulse width : 30ms. 50 0 50 90° 100 RELATIVE LUMINOUS INTENSITY (%) Angular Displacement (deg) 0° X’ Y’ 30° 30° 60° 60° 90° 100 50 0 50 90° 100 RELATIVE LUMINOUS INTENSITY (%) Recommended Pad Layout Packaging Specifications (Unit:mm) Tape Specifications:T86 <5,000pcs/reel> Reel Specifications 0.8 (Unit:mm) The recommended thickness of the screen mask for soldering is between 100 and 150µm. The hole size of the screen mask should be same as the recommended land pattern or smaller. 0.95 Tolerance:± 0.2 φ 180 −30 φ 60 +10 8 φ 13 1.75±0.1 5.5 1.85 φ 1.5 +0.1 0 0 to 0.5 2±0.05 3.5±0.1 0.8 0.85 0.8 Feeding direction 4±0.1 0.5 Label Position Tolerance:±0.2 11.4±1 Electrical Characteristic Curves Forward Current - Forward Voltage Ta=25°C SML-E12M8T SML-E12Y8T SML-E12D8T SML-E12V8T SML-E12U8T 10 2.0 2.5 1.4 SML-E12V8T 0.8 0.6 CASE TEMPERATURE : Tc (°C) 100 SML-E12P8T SML-E12D8T 80 SML-E12U8T SML-E12V8T 60 40 20 10 15 20 MAXIMUM FORWARD CURRENT : IF Max. (mA) Derating SML-E12P8T SML-E12M8T SML-E12Y8T SML-E12D8T 20 SML-E12V8T SML-E12U8T 10 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 AMBIENT TEMPERATURE : Ta (°C) SML-E12P8T SML-E12M8T SML-E12Y8T SML-E12D8T 5 SML-E12V8T SML-E12U8T 1 1 10 100 1000 PULSE DURATION : Tw (µs) PEAK FORWARD CURRENT : IF peak (mA) 30 10 10kHz SML-E12Y8T RATIO of MAXIMUM TOLERABLE PEAK CURRENT IF peak Max. IF Max. to MAXIMUM TOLERABLE DC CURRENT RELATIVE LUMINOUS INTENSITY Ratio of Maximum Tolerable Peak Current - Pulse Duration SML-E12M8T Ta=25°C 5 SML-E12U8T 1.0 0.4 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 3.0 Relative Luminous Intensity - Forward Current 0 0 SML-E12D8T 1.2 FORWARD VOLTAGE : VF (V) 120 SML-E12M8T SML-E12Y8T 200Hz 100Hz 1.5 SML-E12P8T IF=20mA 2kHz 1kHz 1 1.0 1.6 SML-E12P8T RELATIVE LUMINOUS INTENSITY FORWARD CURRENT : IF (mA) 100 Relative Luminous Intensity - Case Temperature 10000 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2007 ROHM CO.,LTD. THE AMERICAS / EUPOPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0