Inductors Surface Mount for Power Applications Features • Low profile 8.46mm in height • Current ratings up to 100A Inductance Values at 20°C Part Number -------Inductance (uH +/- 20%)-------I=0 1/2 (I max) I max 31499-01 31499-02 31499-03 31499-04 31499-05 31499-06 31499-07 31499-08 31499-09 31499-10 31499-11 31499-12 31499-13 31499-14 31499-15 31499-16 332.10 243.09 133.21 79.38 47.40 29.89 19.84 13.28 8.04 5.90 4.10 2.62 1.48 1.03 0.66 0.37 167.38 122.52 67.14 40.01 23.89 15.06 10.00 6.70 4.05 2.98 2.07 1.32 0.74 0.52 0.33 0.19 117.56 86.05 47.16 28.10 16.78 10.58 7.02 4.70 2.84 2.09 1.45 0.93 0.52 0.36 0.23 0.13 Rated DC Current (Amps) 3.33 3.90 5.26 6.82 8.82 11.11 13.64 16.67 21.43 25.00 30.00 37.50 50.00 60.00 75.00 100.00 DC Resistance m Ohm m Ohm Typ Max. 220.70 132.50 68.84 40.97 24.90 13.67 9.33 6.41 3.90 2.81 1.75 1.24 0.71 0.50 0.36 0.22 260.43 156.35 81.23 48.34 29.38 16.13 11.01 7.56 4.49 3.23 2.01 1.43 0.82 0.58 0.419 0.23 Inductance % Inductance vs. Current 100 Temperature Maximum Values 80 Operating Temperature: -55C to +125C Storage Temperature: -65C to +125C 60 Approximate Weight ≤ 8 grams 40 20 0 0 8 16 25 33 42 50 58 67 75 83 92 100 Rated Current % Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 Inductors Set your site on VICOR at www.vicorpower.com Rev. 1.5 Page 1 of 2 Mechanical Outline (All measurements are in inches) 0.800 ±0.010 20.32 ±0.254 0.385 ±0.005 9.779 ±0.127 0.333 ±0.008 8.458 ±0.203 0.010 A A 0.226 ±0.005 5.740 ±0.127 Side View End View 0.103 2.616 0.594 ±0.003 15.088 ±0.076 Bottom View Recommended Pad Dimensions (All measurements are in inches) 0.072 ±0.002 0.265 ±0.002 0.594 ±0.002 0.072 ±0.002 Recommended solder 0.08” thick SAC 305 solder paste. 63/27 solder paste may be used for non-RoHS applications. Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715 Inductors P/N 28801 Set your site on VICOR at www.vicorpower.com Rev. 1.5 6/10