ROHM RCN02M1PPEA35005

RCN02
Resistors
Chip Attenuators (π type)
RCN02
zFeatures
1) Compare with single type
2) Guarantee the attenuation
(±0.3db, ±0.5db)
3) Mounting area 50% less
4) Big reduction for mounting cost
(3 times → Once)
5) ISO9001- / ISO/TS 16949-approved
zQuick reference
The design and specifications are subject to change without prior notice. Before ordering or using, please check the latest technical
specifications.
Part No.
Size code
No. of terminals
No. of elements
Rated power
(70°C)
Impedance
Voltage standing wave ratio
Operating
temperature range
(°C)
1010
(0404)
4
3
0.04W / package
50Ω
MAX 1.3
−55 to +125
RCN02
zDimensions (Unit: mm)
Marking (Terminal No.4)
±
±
±
1.0 0.1
Equivalent
Circuit Diagram
±
0.2 0.1
0.25 0.1
1.0 0.1
4
R1
3
R2 R2
1
+0.1
0.33 −0.05
+0.05
0.34 −0.1
2
±
0.35 0.1
Rev.C 1/2
RCN02
Resistors
zPart No. Explanation
R C N 0 2 M 1
P P E A 3
Part No.
Circuit
Attenuation, Attenuation limitation
Code
A3 5001
A3 5002
A3 5003
A3 5004
A3 5005
A5 5006
A5 5007
A5 5008
A5 5009
A5 5010
A8 5011
A8 5012
A8 5013
B5 5014
B5 5015
B5 5016
C0 5017
C0 5018
C0 5019
C5 5020
Code Specification
π Circuit
PPE
5 0 0 3
Packaging Specifications Code
Part No.
Packaging specifications
Reel
Basic ordering unit (pcs)
M1
Paper tape (2mm Pitch)
φ180mm (7in.)
10,000
Reel (φ180mm) : Compatible with JEITA standard "EIAJ ET-7200B"
Attenuation
1dB
2dB
3dB
4dB
5dB
6dB
7dB
8dB
9dB
10dB
11dB
12dB
13dB
14dB
15dB
16dB
17dB
18dB
19dB
20dB
Limitation
±0.3dB
±0.5dB
±0.8dB
±1.5dB
±2.0dB
±2.5dB
zPackaging
Reel
Taping
P0
φD
P2
0
E
F
W
02
04
06
08
06
D
04
B
02
A
08
B0
A0
P1
Feeding direction
Heat crimp cover / Tape
Chip attenuator
Thick paper
mount (Underside paper tape)
Square punchout hole
T2
C
Label
(Unit : mm)
EIAJ ET-7200B compliant
W
F
E
A0
B0
8.0±0.3
3.5±0.05
1.75±0.1
1.17±0.1
1.17±0.1
D0
P0
P1
P2
T2
+0.1
φ1.5
0
4.0±0.1
2.0±0.1
2.0±0.05
Max. 0.5
(Unit : mm)
A
φ180
B
0
−1.5
φ60
+1
0
C
9
+1.0
0
D
φ13±0.2
Caution : Insertion direction of device to carrier tape.
Marking is on the left bottom side of the cavity to the feeding direction.
Rev.C 2/2
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level
of reliability and the malfunction of which would directly endanger human life (such as medical
instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers
and other safety devices), please be sure to consult with our sales representative in advance.
It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance
of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow
for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in
order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM
cannot be held responsible for any damages arising from the use of the products under conditions out of the
range of the specifications or due to non-compliance with the NOTES specified in this catalog.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System
www.rohm.com
Copyright © 2008 ROHM CO.,LTD.
THE AMERICAS / EUROPE / ASIA / JAPAN
Contact us : [email protected] rohm.co. jp
21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
TEL : +81-75-311-2121
FAX : +81-75-315-0172
Appendix1-Rev2.0