ZSPM9015 Ultra-Compact, High-Performance, High-Frequency DrMOS Device Brief Description Benefits The ZSPM9015 is ZMDI’s next-generation, fully optimized, ultra-compact, integrated MOSFET plus driver power stage solution for high-current, highfrequency, synchronous buck DC-DC applications. The ZSPM9015 integrates a driver IC, two power MOSFETs, and a bootstrap Schottky diode into a thermally enhanced, ultra-compact 6x6mm package. With an integrated approach, the complete switching power stage is optimized with regard to driver and MOSFET dynamic performance, system inductance, and power MOSFET RDS(ON). The ZSPM9015 uses innovative high-performance MOSFET technology, which dramatically reduces switch ringing, eliminating the need for a snubber circuit in most buck converter applications. A driver IC with reduced dead times and propagation delays further enhances the performance. A thermal warning function indicates if a potential over-temperature situation (>150°C) has occurred. An automatic thermal shutdown activates if an over-temperature condition (>180°C) is detected. The ZSPM9015 also incorporates a Zero Current Detection Mode (ZCD) for improved light-load efficiency and provides a tristate 3.3V and 5V PWM input for compatibility with a wide range of PWM controllers. Improved efficiency with zero current detection Clean switching waveforms with minimal ringing Based on the Intel® 4.0 DrMOS standard 72% space-saving compared to conventional discrete solutions High current handling Optimized for use with ZMDI’s ZSPM1000 true digital PWM controller Available Support ZSPM8015-KIT: Evaluation Kit for ZSPM9015 Physical Characteristics Operation temperature: 0°C to +150°C VIN: 4.5V to 25V (typical 12V) IOUT: up to 35A Low-profile SMD package: 6mmx6mm QFN40 ZMDI green packaging and RoHS compliant Typical Application The ZSPM9015 DrMOS is compatible with ZMDI’s ZSPM1000, a leading-edge configurable digital power-management system controller designed for non-isolated point-of-load (POL) supplies. Features High-current handling: up to 35A PWM input capable of 3.3V and 5V Optimized for switching frequencies up to 1MHz Zero-current detection and under-voltage lockout (UVLO) Thermal shutdown and warning flag for overtemperature conditions Driver output disable function (DISB# pin) Integrated Schottky diode technology in the low-side MOSFET Integrated bootstrap Schottky diode Adaptive gate drive timing for shoot-through protection For more information, contact ZMDI via [email protected]. © 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.10 — August 5, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice. ZSPM9015 Ultra-Compact, High-Performance, High-Frequency DrMOS Device ZSPM9015 Block Diagram BOOT Typical Applications High-performance gaming motherboards Compact blade servers, Vcore and non-Vcore DC-DC converters Desktop computers, Vcore and Non-Vcore DC-DC converters VIN DBoot VCIN UVLO PWM GH Logic GH Level Shift (Q1) HS Power MOSFET GH LOGIC CGND PHASE Anti-Cross Conduction ZCD_EN# VSWH Workstations VCIN High-current DC-DC point-of-load converters Networking and telecom microprocessor voltage regulators Small form-factor voltage regulator modules GL GL Logic DISB# (Q2) LS Power MOSFET GL Thermal Thermal Warning Shutdown THWN# ZSPM9015 PGND Ordering Information Product Sales Code Description Package ZSPM9015ZI1R ZSPM9015 RoHS-Compliant QFN40 – Junction temperature range: 0°C to 150°C Reel ZSPM8015-KIT Evaluation Kit for ZSPM9015 Kit Sales and Further Information www.zmdi.com [email protected] Zentrum Mikroelektronik Dresden AG Global Headquarters Grenzstrasse 28 01109 Dresden, Germany ZMD America, Inc. 1525 McCarthy Blvd., #212 Milpitas, CA 95035-7453 USA Central Office: Phone +49.351.8822.306 Fax +49.351.8822.337 USA Phone 1.855.275.9634 Phone +1.408.883.6310 Fax +1.408.883.6358 European Technical Support Phone +49.351.8822.7.772 Fax +49.351.8822.87.772 DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice. Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise. European Sales (Stuttgart) Phone +49.711.674517.55 Fax +49.711.674517.87955 Zentrum Mikroelektronik Dresden AG, Japan Office 2nd Floor, Shinbashi Tokyu Bldg. 4-21-3, Shinbashi, Minato-ku Tokyo, 105-0004 Japan ZMD FAR EAST, Ltd. 3F, No. 51, Sec. 2, Keelung Road 11052 Taipei Taiwan Phone +81.3.6895.7410 Fax +81.3.6895.7301 Phone +886.2.2377.8189 Fax +886.2.2377.8199 Zentrum Mikroelektronik Dresden AG, Korea Office U-space 1 Building 11th Floor, Unit JA-1102 670 Sampyeong-dong Bundang-gu, Seongnam-si Gyeonggi-do, 463-400 Korea Phone +82.31.950.7679 Fax +82.504.841.3026 © 2013 Zentrum Mikroelektronik Dresden AG — Rev. 1.10 — August 5, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.