TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Part No. TV0136A REV. NO.:3.0 Description and Applications: RoHS Compliant Voltage Control Oscillator, SMD type, 5.5mmx4.8mm. Lead-free soldering Conditions: Parameter Symbol Limits typ. 4.5 max. 4.6 Units Supply Voltage Vcc min. 4.4 Control Voltage Range Vt 0.5 - 4.5 V Load Impedance - - 50 - Ohm Operating Temperature - -30 25 70 ℃ V Electrical Specifications: For different applications, the specification change is possible. Please contact TST sales representative or application engineer for your requirement. Limits Parameter ℃ Condition Units min. typ. max. Power Consumption 25±3 Operation Frequency Range Control Voltage Sensitivity Output Level 25±3 25±3 25±3 C/N Pushing Figure Pulling Figure Harmonics (2fo, 3fo) Harmonics (4fo) Non-harmonic spurious - 25 KHz offset 50 KHz offset 100 KHz offset 25±3 250 KHz offset 500 KHz offset 5 MHz offset 10 MHz offset Vcc=4.5+-0.1V, ref 25±3 Vcc=4.5V VSWR=2.0 for all 25±3 phase, ref:50Ohm 25±3 25±3 25±3 - - 11 15 mA 380 20 0 - +3 - 430 30 +6 112 118 124 130 136 153 153 MHz MHz/V dBm -0.5 - +0.5 MHz -1.0 - +1.0 MHz - - -15 -30 -70 dBc dBc dBc dBc/Hz Unless otherwise specified, the standard test conditions are as follow: Ambient temperature: 25±3 C Relative humidity: 40% to 70% TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 Mechanical Dimensions (mm): A=5.5 B=4.8 C=1.7 D=4.5 E=3.4 F=1.7 G=3.5 H=0.7 I=1.5 Pin #1= RF OUT Pin #2= Vcc Pin #3= Vcont (Vt) Pin #4= GND Pin #5= GND Pin #6= GND Marking: Line 1= 0136 (TST P/N) Line 2= TST Logo + VCO Product Code + Date Code Product Code Table: Date Code Table: WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 A B C D E F G H I J K L WK13 M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 Part Orientation: 5.5x4.8mm Package Carrier Tape Tape Width: 12 mm Tape Pitch (part to part): 8 mm Reel Diameter: 320.2mm ( 13 inches) Quantity per reel: 1000 or 2000 Tape & Reel: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 [NOTES] 1. UNIT : MM. 2. UNLESS OTHERWISE SPECIFIED TOLERANCE ON DIM. +/-0.1MM. 3. MATERIAL: CONDUCTIVE POLYSTYRENE. 4. COLOR: BLACK. 5. 10 PITCH CUMULATIVE TOLERANCE +/-0.2MM. Reflow Profile: Note: 1.Max peak temperature: 260+/-5 deg C; Time: 10+/-2 sec 2. Temperature: 217+/-5 deg C; Time: 90~100 sec TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5