TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 62MHz 1MHz BW (SMD 5.0×7.0 mm) MODEL NO.: TB0888A REV. NO.1 A. MAXIMUM RATING: 1. Operating temperature range: -40°C to 85°C 2. Storage temperature range: -40°C to 85°C 3. Input Power Level : 10 dBm 4. Maximum DC Voltage : 10V RoHS Compliant Lead free Lead-free soldering B. Characteristics : 1. Ambient Temperature: Item 25 ° Unit MHz Min. - Type. 62 Max. - Insertion Loss, IL dB - 16.5 18 -1.5dB bandwidth MHz - 1.0 - -40dB bandwidth MHz - 3.0 4.0 Passband Ripple Fc+/-100KHz MHz - 0.2 1.0 Group Delay Variation Fc+/-100KHz nsec - 70 150 Absolute Delay usec - 0.8 1.2 ppm/˚C2 - -0.036 - Source Impedance Ohm - 50 - Load Impedance Ohm - 50 - Center frequency, Fc Temp. Coefficient TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. Frequency Characteristics : (1) Wide band Response:(span 50MHz) Fig1. Horizontal: 5MHz/Div Vertical: 10dB/Div (2) Pass band Response and Group Delay Response: Fig2. Horizontal: 0.2MHz/Div TAI-SAW TECHNOLOGY CO., LTD. Vertical: 1dB/Div Vertical: 100ns/Div TST DCC Release document 3 D. Matching Circuit: Ls2=560nH + 680nH L s3=680nH + 470nH C p1=56pF C p4=47pF E. Outline Drawing: 8 T 8 8 Δ □ Pin J –RF input Pin L –RF input ground Pin D –RF output Pin F –RF ontput ground Pin A,B,C,G,H,I - Ground □ : Week Code (Follow the table from planner each year) Unit : mm △ : Product / Year Code Year 2009 2013 2010 2014 2011 2015 2012 2016 Product Code B b B b TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 F. PCB Footprint: G. PACKING: 1. REEL DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 2. TAPE DIMENSION 8 8 8 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 Temp ( Deg C) H. RECOMMENDED REFLOW PROFILE : Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6