TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Product Specifications Approval Sheet Product Name: SAW Duplexer 1880/1960MHz 60MHz BW SMD 3.8×3.8 mm TST Parts No.: TF0068A Customer Part No.: Customer signature required Company: Division: Approved by : Date: Checked by: Andy Yu Approved by: Bob Chau Date: 2013, 11, 25 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Duplexer 1880/1960MHz 60MHz BW SMD 3.8×3.8 mm MODEL NO.: TF0068A REV. No.: 1.0 A. MAXIMUM RATING: RoHS Compliant 1. Maximum Input Power: 1.0 W 2.DC voltage: 0 V 3.Operating Temperature: -30°C to +85°C 4.Storage Temperature: -40°C to +85°C Lead-free soldering B. ELECTRICAL CHARACTERISTICS: Tx → Ant Parameters Description Specifications (+25C) Condition [MHz] Unit Minimum Typical Maximum Insertion Loss 1850.6 ~ 1909.4 dB - 1.5 3.0 Passband Ripple 1850.6 ~ 1909.4 dB - 1.0 2.0 Return Loss 1850.6 ~ 1909.4 dB 9.5 14 - Attenuation 1930.6 ~ 1989.4 dB 43 48 - Ant → Rx Parameters Description Condition [MHz] Specifications Unit Minimum Typical Maximum Insertion Loss 1930.6 ~ 1989.4 dB - 2.0 3.5 Passband Ripple 1930.6 ~ 1989.4 dB - 1..1 2.6 Return Loss 1930.6 ~ 1989.4 dB 9.5 16 - Attenuation 1850.6 ~ 1909.4 dB 50 55 - Specifications Tx → Rx Parameters Description Isolation Condition [MHz] Unit 1850.6 ~ 1909.4 dB Minimum 54 1930.6 ~ 1989.4 dB 45 TAI-SAW TECHNOLOGY CO., LTD. Typical 57 Maximum - 50 - TST DCC Release document 2 Tx → Ant Parameters Description Condition [MHz] Specifications (-30 ~ +85C) Unit Minimum Typical Maximum Insertion Loss 1850.6 ~ 1909.4 dB - - 3.5 Passband Ripple 1850.6 ~ 1909.4 dB - - 2.8 Return Loss 1850.6 ~ 1909.4 dB 9.5 - - Attenuation 1930.6 ~ 1989.4 dB 43 - - Ant → Rx Parameters Description Condition [MHz] Specifications Unit Minimum Typical Maximum Insertion Loss 1930.6 ~ 1989.4 dB - - 3.8 Passband Ripple 1930.6 ~ 1989.4 dB - - 3.0 Return Loss 1930.6 ~ 1989.4 dB 9.5 - - Attenuation 1850.6 ~ 1909.4 dB 50 - - Specifications Tx → Rx Parameters Description Isolation Condition [MHz] Unit 1850.6 ~ 1909.4 dB Minimum 54 1930.6 ~ 1989.4 dB 45 TAI-SAW TECHNOLOGY CO., LTD. Typical - Maximum - - - TST DCC Release document 3 C. Frequency Characteristics : Tx to Ant, Ant to Rx Return Loss TX Return Loss RX Return Loss Ant Tx to Rx Isolation TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 D. MEASUREMENT CIRCUIT: E.OUTLINE DRAWING: J 6 7 8 ① ④ ② ③ 1. Tolerance: XX±0.1, X,XX±0.05 PIN NO. FUNCTION ① Tx (1880MHz) ② Rx (1960MHz) ③ Antenna ④ GND 2. Package Height: 1.4mm Max 3. Contact areas are Gold plated , , : Exposed ports : Exposed ground plane TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 F. PCB Footprint: Duplexer superposed on solder stencil ※ Notes: Dimensions in millimeters (mm) Solder stripes (14pls) are 0.20wide, pitch Solder pads for I/O are 0.35x0.35 Stencil pattern is centered on duplexer G. PACKING: 1. REEL DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 2. TAPE DIMENSION H. RECOMMENDED REFLOW PROFILE : TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7