TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 1590.155MHz MODEL NO.:TA1500A REV. NO.:1 A. MAXIMUM RATING: 1. Input Power Level: 13 dBm 2. DC Voltage : 3V RoHS Compliant Lead free Lead-free soldering 3. Operating Temperature: -20°C to +70°C 4. Storage Temperature: -40°C to +85°C Electrostatic Sensitive Device (ESD) B. ELECTRICAL CHARACTERISTICS: Terminating source impedance (single-ended) : Terminating load impedance (single-ended) : Item Zs = 50 Ω ZL = 50 Ω Unit Fc MHz Min. - Insertion Loss (1574.42~1576.42 MHz) IL dB - 0.85 1.3 - Insertion Loss (1597.55~1605.89 MHz) IL dB - 0.95 1.3 - Amplitude ripple (1574.42~1605.89 MHz) dB - 0.3 0.6 - Group Delay ripple (1574.42~1605.89 MHz) ns - 8 15 - - 1.3 2.1 - Center Frequency VSWR (1574.42~1605.89 MHz) Typ. Max. Note 1590.155 - Attenuation (Reference level from 0 dB) D.C.~915 MHz dB 18 21 - - 915~1525 MHz dB 17 19 - - 1660~4500 MHz dB 17 20 - - 4500~6000 MHz dB 12 32 - - ppm/℃ - -36 - - Temperature Coefficient of Frequency TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C.OUTLINE DRAWING: top view □ G bottom view side view C : Input A : Output B,D,E : Ground Unit : mm □ : Year/Month Code (Follow the table) Year/Month 1 2 3 4 5 6 7 8 9 10 11 12 2009 A B C D E F G H J K L M 2010 N P Q R S T U V W X Y Z 2011 A B C D E F G H J K L M 2012 N P Q R S T U V W X Y Z 2013 A B C D E F G H J K L M 2014 N P Q R S T U V W X Y Z TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 D. MEASUREMENT CIRCUIT: E. PCB Footprint: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 F. Frequency Characteristics : TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 Reflection Functions : S11 S22 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 G. PACKING: 1. REEL DIMENSION (Please refer to FR-75D10 for packing quantity ) 2.TAPE DIMENSION G□ Direction of Feed TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7 H. RECOMMENDED REFLOW PROFILE : 1. 2. 3. 4. Preheating shall be fixed at 150~180℃ for 60~90 seconds. Ascending time to preheating temperature 150℃ shall be 30 seconds min. Heating shall be fixed at 220℃ for 50~80 seconds and at 245~260℃ peak (min. 10sec). Time : 2 times. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 8