TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 2535MHz MODEL NO.:TA1465A REV. NO.:2 A. MAXIMUM RATING: 1. Input Power Level: 10 dBm 2. DC Voltage : 3V RoHS Compliant Lead free Lead-free soldering 3. Operating Temperature: -20°C to +70°C 4. Storage Temperature: -40°C to +85°C Electrostatic Sensitive Device (ESD) B. ELECTRICAL CHARACTERISTICS: Terminating source impedance (single-ended) : Terminating load impedance (single-ended) : Item Zs = 50 Ω ZL = 50 Ω Unit Center Frequency Fc MHz Min. - Insertion Loss (2500~2570 MHz) IL dB - 2.5 3.5 - dB - 1.2 2.2 - - 1.9 2.2 - Amplitude ripple (2500~2570 MHz) VSWR (2500~2570 MHz) Typ. 2535 Max. Note - Attenuation (Reference level from 0 dB) D.C.~2100 MHz dB 25 27 - - 2100~2450 MHz dB 25 28 - - 2620~4000 MHz dB 27 30 - - 4000~5000 MHz dB 20 36 - - ppm/℃ - -36 - - Temperature Coefficient of Frequency TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C.OUTLINE DRAWING: top view A □ bottom view side view C : Input A : Output B,D,E : Ground Unit : mm □ : Year/Month Code (Follow the table) YEAR/Month 1 2 3 4 2013 A B C D 2014 N P Q R 2015 a b c d 2016 n p q r 2017 A B C D 2018 N P Q R 2019 a b c d 2020 n p q r 5 E S e s E S e s 6 F T f t F T f t 7 G U g u G U g u TAI-SAW TECHNOLOGY CO., LTD. 8 H V h v H V h v 9 J W j w J W j w 10 K X k x K X k x 11 L Y l y L Y l y TST DCC Release document 12 M Z m z M Z m z 3 D. MEASUREMENT CIRCUIT: E. PCB Footprint: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 F. Frequency Characteristics : TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 Reflection Functions : S11 S22 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 G. PACKING: 1. REEL DIMENSION (Reel Count : 7”=3000 or per the request of customer order ) 2.TAPE DIMENSION A□ Direction of Feed TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7 H. RECOMMENDED REFLOW PROFILE : 1. 2. 3. 4. Preheating shall be fixed at 150~180℃ for 60~90 seconds. Ascending time to preheating temperature 150℃ shall be 30 seconds min. Heating shall be fixed at 220℃ for 50~80 seconds and at 245~260℃ peak (min. 10sec). Time : 2 times. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 8