TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SMD 7.0x5.0 LVPECL SAW OSCILLATOR MODEL NO.: TS0019A REV. NO.:2.0 RoHS Compliant Lead free Lead-free soldering Electrostatic Sensitive Device (ESD) Conditions: Parameter Vcc min. 3.0 Limits typ. 3.3 max. 3.6 - - 50 - Ω Ta 0 - 70 ℃ Symbol Supply Voltage Load Impedance Operating Temperature Range Units V Electrical Specifications: For different applications, the specification change is possible. Please contact TST sales representative or application engineer for your requirement. Parameter Symbol Limits min. typ. max. Units Conditions Output Frequency - - 156.25 - MHz Frequency tolerance - -100 - 100 ppm Include operating temperature range Current Consumption - - - 88 mA OE=Vcc L_LVPECL=50Ω 2.275 - 2.42 V Ta=0 to 85℃ 2.215 - 2.42 V Ta= -40℃ 1.49 - 1.68 V Ta=0 to 85℃ 1.47 - 1.745 V Ta= -40℃ HIGH-level input voltage VOH LOW-level input voltage VOL HIGH-level input voltage VIH 0.7VCC - - V OE terminal LOW-level input voltage VIL - - 0.3VCC V OE terminal LVPECL Rise time *1 tr - - 0.4 ns LVPECL Fall time *1 tf - - 0.4 ns Output clock duty cycle*1 SYM 45 - 55 % At outputs crossing point Oscillation Start Up time t_str - - 10 msec. t=0 at Vcc min tPJ - - 1 - - +-10 Phase Jitter Frequency Aging 20%-Æ80% - of differential output voltage 80%-Æ20% - of differential output voltage Integration of Phase noise Offset 12KHz~20 MHz ppm/yr 25 deg.C 1st year. ps *1 Please see page 7：Timing chart TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 *Reference value Parameter Symbol Limits min. typ. max. Units Conditions Deterministic Jitter tDJ - 0.2 - ps - Random Jitter tRJ - 3 - ps - tRMS - 3 - ps - Peak to Peak tp-p - 25 - ps - Accumulated Jitter(σ) n=2~50 000cycles tacc - 4 - ps - Units Conditions - σ(RMS of total distri.) Phase Noise： Parameter Symbol Limits min. typ. max. Phase Noise @ 100Hz PN1 - -80 - dBc/Hz Phase Noise @ 1KHz PN1 - -111 - dBc/Hz Phase Noise @ 10 KHz PN2 - -138 - dBc/Hz - Phase Noise @ 100KHz PN3 - -144 - dBc/Hz - Phase Noise @ 1MHz PN4 - -145 - dBc/Hz - TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 Mechanical Dimensions (mm): z LVPECL SO TS0019A PACKAGE DIM.: z Recommended customer PCB Layout footprint (mm): TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 Marking: Line 1: TST P/N (TS0019A) Line 2: TST Logo + SO Product Code + Date Code 019 Pin Connection A B C D OE N.C. GND OUT E F OUT Vcc △ □ Product Code Table: Year 2009 2013 2010 2014 2011 2015 2012 2016 Product Code S s S s Date Code Table: WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 WK13 A B C D E F G H I J K L M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 Tape & Reel: 019 [NOTE] 1. UNIT : MM. 2. UNLESS OTHERWISE SPECIFIED TOLERANCE ON DIM. +/-0.1MM. 3. MATERIAL : CONDUCTIVE POLYSTYRENE. 4. COLOR : BLACK. 5. 10 PITCH CUMULATIVE TOLERANCE +/-0.2MM. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 RECOMMENDED REFLOW PROFILE: Timing chart： Output waveform(OUT and OUTN) SYM = tw / tPER OE Function OE HIGH(or open) LOW OUT,OUTN Either fo or fo/2 high impedance Oscillator Normal operation Stopped When OE goes LOW, the oscillator stops and the output pins(OUT,OUTN)become high impedance. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7