SHIELDED SMD INDUCTOR DR358

September 23, 2009
SHIELDED SMD INDUCTOR DR358-1 SERIES
Features





Low Profile Surface Mount Design
Flat Top for Pick and Place
Inductance Range from 1.0µH to 39.0µH
Operating Temp. -20°C to +80°C
Tinned Leads with Leaded Solder is Available (note 7)
ELECTRICAL SPECIFICATIONS AT 25ºC
Part No.
DR358-1-102
DR358-1-222
DR358-1-272
DR358-1-332
DR358-1-392
DR358-1-472
DR358-1-562
DR358-1-682
DR358-1-822
DR358-1-103
DR358-1-123
DR358-1-153
DR358-1-183
DR358-1-223
DR358-1-273
DR358-1-333
DR358-1-393
Inductance
(H)  30%
1.0
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10.0
12.0
15.0
18.0
22.0
27.0
33.0
39.0
DCR
() Max.
0.045
0.075
0.105
0.110
0.155
0.162
0.170
0.200
0.245
0.200
0.210
0.240
0.338
0.397
0.441
0.694
0.709
I rated
(A) Max.
1.72
1.32
1.28
1.04
0.88
0.84
0.80
0.76
0.68
0.61
0.56
0.50
0.48
0.41
0.35
0.32
0.30
MECHANICAL OUTLINES
Notes:
1. All dimensions are shown in millimeter “mm”
2. General tolerance 0.2mm, unless other specified
3. Inductance Test: 100kHz, 0.1Vrms
4. Irated for an approximate 40C temperature rise
5. Irated for an approximate 35% drop maximum of the initial value
6. Tape and reel quantity, 2000 pcs/reel
7. For non-RoHS parts replace DR prefix with 42- (e.g. DR358-1 becomes 42-358-1)
8. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020D
DATATRONIC:
28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Fax: 951-928-7701 Email: [email protected]
499 King’s Road, Hong Kong Tel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290
All specifications are subject to change without notice.