SMD INDUCTOR DR336 SERIES

November 3, 2011
SMD INDUCTOR DR336 SERIES
Features





Low Profile Surface Mount Design
Flat Top for Pick and Place
Inductance Range from 10µH to 1000µH
Operating Temp. -20°C to +80°C
Tinned Leads with Leaded Solder is Available (note 6)
ELECTRICAL SPECIFICATIONS AT 25ºC
PART No.
INDUCTANCE (H)
10  20%
12  20%
15  20%
18  20%
22  20%
27  20%
33  20%
39  20%
47  20%
56  20%
68  10%
82  10%
100  10%
120  10%
150  10%
180  10%
220  10%
270  10%
330  10%
DR336-103
DR336-123
DR336-153
DR336-183
DR336-223
DR336-273
DR336-333
DR336-393
DR336-473
DR336-563
DR336-683
DR336-823
DR336-104
DR336-124
DR336-154
DR336-184
DR336-224
DR336-274
DR336-334
@ 2.52MHz
@ 2.52MHz
@ 2.52MHz
@ 2.52MHz
@ 2.52MHz
@ 2.52MHz
@ 2.52MHz
@ 2.52MHz
@ 2.52MHz
@ 2.52MHz
@ 2.52MHz
@ 2.52MHz
@ 1kHz
@ 1kHz
@ 1kHz
@ 1kHz
@ 1kHz
@ 1kHz
@ 1kHz
DCR
() Max.
0.08
0.09
0.10
0.11
0.13
0.17
0.18
0.22
0.25
0.28
0.33
0.45
0.48
0.54
0.75
1.02
1.20
1.31
1.50
RATED CURRENT
(A) Max.
1.44
1.39
1.24
1.12
1.07
0.94
0.85
0.74
0.68
0.64
0.59
0.54
0.51
0.49
0.40
0.36
0.31
0.29
0.28
MECHANICAL OUTLINES
7.80±0.3
[0.307]
7.00±0.3
[0.276]
8.00
[0.315]
3.50
[0.138]
2.00
[0.078]
XXX
1
7.50
[0.295]
2
TOP VIEW
SIDE VIEW
BOTTOM VIEW
PCB SOLDER PAD LAYOUT (REF.)
SCHEMATIC
NOTES:
1. All dimensions are shown in millimeters “mm” [inches “in”].
2. General tolerance 0.25mm [0.010 IN.], unless otherwise specified.
3. Tape and reel quantity, 1000 pcs/reel.
4. Terminal finish is compliant to RoHS requirements
5. Solder in accordance with J-STD-002 Rev. D
6. Non-RoHS series parts 42-336-XXX are finished with leaded solder Sn60Pb40 or equivalent
DATATRONIC:
28151Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Fax: 951-928-7701 Email: [email protected]
499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290
All specifications are subject to change without notice.