November 8, 2011 SHIELDED POWER INDUCTOR DR340-3 SERIES Features Maximum Height: 6.0mm Footprint: 12mm x 12mm Max. Inductance Range from 1.3µH to 1.0mH Non-RoHS Versions are Available (Note 8) ELECTRICAL SPECIFICATIONS AT 25°C OPERATING TEMPERATURE -20°C to +80°C Part Number Inductance (µH) ± 20% Test Frequency DCR (Ω) Max. IDC (A) Max. DR340-3-132 DR340-3-212 DR340-3-312 DR340-3-442 DR340-3-582 DR340-3-752 DR340-3-103 DR340-3-123 DR340-3-153 DR340-3-183 DR340-3-223 DR340-3-273 DR340-3-333 DR340-3-393 DR340-3-473 DR340-3-563 DR340-3-683 DR340-3-823 DR340-3-104 DR340-3-124 DR340-3-154 DR340-3-184 DR340-3-224 DR340-3-274 DR340-3-334 DR340-3-394 DR340-3-474 DR340-3-564 DR340-3-684 DR340-3-824 DR340-3-105 1.3 2.1 3.1 4.4 5.8 7.5 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 7.96MHz 7.96MHz 7.96MHz 7.96MHz 7.96MHz 7.96MHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 0.012 0.014 0.017 0.020 0.021 0.024 0.025 0.027 0.030 0.034 0.036 0.051 0.057 0.068 0.075 0.110 0.120 0.140 0.160 0.170 0.230 0.290 0.400 0.460 0.510 0.690 0.770 0.860 1.200 1.340 1.530 8.0 7.0 6.0 5.0 4.4 4.2 4.0 3.5 3.3 3.0 2.8 2.3 2.1 2.0 1.8 1.7 1.5 1.4 1.3 1.1 1.0 0.9 0.8 0.75 0.68 0.65 0.58 0.54 0.48 0.43 0.40 DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice. Page 1 of 2 November 8, 2011 SHIELDED POWER INDUCTOR DR340-3 SERIES MECHANICAL OUTLINE 1 .472 12,00 .197 5,00 .311 7,90 XXX 2 .472 12,00 .236 Max. 6,00 1 2 SCHEMATIC .275 7,00 .504 12,80 .212 5,40 NOTES: 1. All dimensions are shown in inches/millimeters 2. Unless otherwise specified, tolerance = Inches: ±0.012 = Millimeters: ±0,30 3. IDC MAX based on the inductance being 75% of its initial value 4. Tape & reel quantity, 500 pcs/reel 5. Inductance tolerance values: 1.3µH – 7.5µH = +30% / -20% 6. Terminal finish is compliant to RoHS requirements 7. Solder in accordance with J-STD-002 Rev. D 8. Non-RoHS series parts 42-340-3-XXX are finished with leaded solder Sn60Pb40 or equivalent DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice. Page 2 of 2