[Spec]SMJQ-XC95W4PX - Seoul Semiconductor

Product Data Sheet
SMJQ-XC95W4PX – Acrich3 95W
Integrated AC LED Solution
Acrich3 – 95W
SMJQ-XC95W4PX
SMJQ-2C95W4PA
SMJQ-3C95W4P7
RoHS
Product Brief
Description
•
•
•
Features and Benefits
•
•
•
•
•
•
•
•
The Acrich3 series of products are
designed to be driven directly off of AC
line voltage, therefore they do not need
the standard converter essential for
conventional general lighting products.
The converter or driver found in most
general lighting products can limit the
overall life of the product, but with the
Acrich3 series of products the life of the
product can more closely be estimated
from the LED itself. This will also allow
for a much smaller form factor from an
overall fixture design allowing for higher
creativity in the fixture.
The modules have a high power factor
which can contribute to a higher energy
savings in the end application.
Connects directly to AC line voltage
High Power Efficiency & Factor
Low THD
Long Life Time
Simple BOM
Miniaturization
Lead Free Product
RoHS Compliant
Key Applications
•
•
•
•
Factory Ceiling Light
Industrial Light
High Bay
Low Bay
Table 1. Product Selection
Flux [lm]
Part No.
SMJQ-2C95W4PA
Vin [Vac]
P [W]
Rev1.1, Sep 10, 2015
Min.
Typ.
Min.
9,500
10,300
70
120
95
SMJQ-3C95W4P7
CRI
CCT [K]
3700 - 6000
220
1
www.seoulsemicon.com
Product Data Sheet
SMJQ-XC95W4PX – Acrich3 95W
Table of Contents
Index
•
Product Brief
1
•
Table of Contents
2
•
Performance Characteristics
3
•
Characteristic Graph
5
•
Color Bin Structure
8
•
Mechanical Dimensions
10
•
Marking Information
11
•
Packing & Label Information
12
•
Handling of Silicone Resin for LEDs
14
•
Precaution for Use
15
•
Company Information
17
Rev1.1, Sep 10, 2015
2
www.seoulsemicon.com
Product Data Sheet
SMJQ-XC95W4PX – Acrich3 95W
Performance Characteristics
Table 2. Electro Optical Characteristics, Ta = 25ºC
Value
Parameter
Symbol
Min.
Typ.
ФV
Luminous Flux [1]
Correlated Color
Temperature [2]
10300
5300
5600
6000
4700
5000
5300
CCT
CRI
Ra
Input Voltage [3]
Vin
Unit
Mark
lm
B,C,D,E
Max.
B
C
K
4200
4500
4700
D
3700
4000
4200
E
70
-
-
-
120
2C
Vac
220
3C
Power Consumption
P
95
W
Operating Frequency
f
50 / 60
Hz
Power Factor
PF
Over 0.97
-
Viewing Angle
2Θ1/2
120
deg.
Tolerance of Surge
[4]
Vs
1000
-
-
95W
V
Notes :
(1) ФV is the total luminous flux output measured with an integrated sphere.
(2) Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram.
(3) Operating Voltage doesn't indicate the maximum voltage which customers use but means
tolerable voltage according to each country’s voltage variation rate. It is recommended that the
solder pad temperature should be below 70℃.
(4) Surge withstand in accordance with IEC61000-4-5.(Line to Line)
Rev1.1, Sep 10, 2015
3
www.seoulsemicon.com
Product Data Sheet
SMJQ-XC95W4PX – Acrich3 95W
Performance Characteristics
Table 3. Absolute Maximum Ratings, Ta = 25ºC
Parameter
Symbol
Unit
Maximum Input Voltage
Vin
VAC
Value
144 (@120VAC)
264 (@220VAC)
Power Consumption
P
W
114
Operating Temperature
Topr
ºC
-30 ~ 85
Storage Temperature
Tstg
ºC
-40 ~ 100
ESD Sensitivity
-
-
±4,000V HBM
Rev1.1, Sep 10, 2015
4
www.seoulsemicon.com
Product Data Sheet
SMJQ-XC95W4PX – Acrich3 95W
Chraracteristics Graph
Fig 1. Relative Spectral Distribution vs. Wavelength Characteristic – B,C
Relative Spectral Power
Distribution
1.2
1
0.8
0.6
0.4
0.2
0
380
430
480
530
580
630
680
730
780
Wavelength[nm]
Fig 2. Relative Spectral Distribution vs. Wavelength Characteristic – D,E
Relative Spectral Power
Distribution
1.2
1
0.8
0.6
0.4
0.2
0
380
430
480
530
580
630
680
730
780
Wavelength[nm]
Rev1.1, Sep 10, 2015
5
www.seoulsemicon.com
Product Data Sheet
SMJQ-XC95W4PX – Acrich3 95W
Chraracteristics Graph
Fig 3. Relative Power Distribution vs. Voltage, Ta =25℃, 120V (P.Com Mode)
5
Relative Power[%]
0
-5
-10
-15
-20
-25
-30
-35
100
110
120
130
140
Voltage[VAC]
Fig 4. Relative Power Distribution vs. Voltage, Ta =25℃, 220V (P.Com Mode)
5
Relative Power[%]
0
-5
-10
-15
-20
-25
-30
-35
180
190
200
210
220
230
240
250
260
Voltage[VAC]
Notes :
Power Compensation Range : ±5% of Rated Power within Rated Voltage +20%
Rev1.1, Sep 10, 2015
6
www.seoulsemicon.com
Product Data Sheet
SMJQ-XC95W4PX – Acrich3 95W
Chraracteristics Graph
Fig 5. Radiant Pattern, Ta =25℃
Rev1.1, Sep 10, 2015
7
www.seoulsemicon.com
Product Data Sheet
SMJQ-XC95W4PX – Acrich3 95W
Color Bin Structure
CIE Chromaticity Diagram
Rev1.1, Sep 10, 2015
8
www.seoulsemicon.com
Product Data Sheet
SMJQ-XC95W4PX – Acrich3 95W
Color Bin Structure
CIE Chromaticity Diagram
Rev1.1, Sep 10, 2015
9
www.seoulsemicon.com
Product Data Sheet
SMJQ-XC95W4PX – Acrich3 95W
Mechanical Dimensions
SMJQ-2C95W4PA
SMJQ-3C95W4P7
Notes :
(1) All dimensions are in millimeters. (Tolerance : ±0.2)
(2) Scale : None
Rev1.1, Sep 10, 2015
10
www.seoulsemicon.com
Product Data Sheet
SMJQ-XC95W4PX – Acrich3 95W
Marking Information
A
A : Marking
ex) 150101 W2C2A
W2 C2 A
- Description
150101
①
W2 C2 A
②
Rev1.1, Sep 10, 2015
③
④
①
②
③
④
SMT Date (YYMMDD, 6 Digits)
LED PKG. Luminous Intensity Bin
(2 Digits)
LED PKG. Color Bin (2 Digits)
Voltage Bin (2 Digits)
11
www.seoulsemicon.com
Product Data Sheet
SMJQ-XC95W4PX – Acrich3 95W
Packing
1. Tray information
4. Box information & packing
• 6 PCS LED modules packed per tray
2. Tray stack and taping
12EA trays
with LED modules
• 12 LED module trays and additional 2 dummy
trays up and down of box
• Add silica gel (1EA) on top of the tray
3. Sealing packing
• 60 PCS modules per BOX 1EA
Dielectric sealing pack
(700x700)
Rev1.1, Sep 10, 2015
12
** 1 Box: 6 PCS per tray x 12 trays = 60 PCS
www.seoulsemicon.com
Product Data Sheet
SMJQ-XC95W4PX – Acrich3 95W
Label Information
Model No.
SMJQ-XC95W4PX (1)
Rank
W2G06A (2)
Type
STD (3)
IIIII II IIIII III
IIIII II IIIII III
60
Quantity
Lot No.
IIIII II IIIII III
YYMDDXXXXX-XXXXXXX
IIIII II IIIII III
SEOUL SEMICONDUCTOR CO.,LTD.
Notes
(1) The model number designation is explained as follow
SMJQ : Seoul Semiconductor internal code
X : (2=120V, 3=220V)
C : Power Compensation Mode(Optional)
95W : About Power Consumption
4 : Acrich3 IC(DT3007B, DT3007C)
PD: MJT PKG (SAW0LA0A, SAW0LH0A)
(2) It represents the LED module rank.
W2 : Flux Bin
G06 : 6 LED Bins of CCT (C = CCT)
A : Non-Mixing
(3) It represents ANSI 7 Step bin(STD).
TOTAL Quantity
XXX
SEOUL SEMICONDUCTOR CO.,LTD.
Rev1.1, Sep 10, 2015
13
www.seoulsemicon.com
Product Data Sheet
SMJQ-XC95W4PX – Acrich3 95W
Handling of Silicone Resin for LEDs
(1) Acrich2 series is encapsulated with silicone resin for high optical efficiency.
(2) Please do not touch the silicone resin area with sharp objects such as pincette(tweezers).
(3) Finger prints on silicone resin area may affect the performance.
(4) Please store LEDs in covered containers to prevent dust accumulation as this may affect
performance.
(5) Excessive force more than 3000gf to the silicone lens can result in fatal or permanent damage
with LEDs.
(6) Please do not cover the silicone resin area with any other resins such as epoxy, urethane, etc.
Rev1.1, Sep 10, 2015
14
www.seoulsemicon.com
Product Data Sheet
SMJQ-XC95W4PX – Acrich3 95W
Precaution for Use
(1) Please review the Acrich2 Application Note for proper protective circuitry usage.
(2) Please note, Acrich2 products run off of high voltage, therefore caution should be taken when
working near Acrich2 products.
(3) Make sure proper discharge prior to starting work.
(4) DO NOT touch any of the circuit board, components or terminals with body or metal while circuit
is active.
(5) Please do not add or change wires while Acrich2 circuit is active.
(6) Long time exposure to sunlight or UV can cause the lens to discolor.
(7) Please do not use adhesives to attach the LED that outgas organic vapor.
(8) Please do not use together with the materials containing Sulfur.
(9) Please do not assemble in conditions of high moisture and/or oxidizing gas such as Cl, H 2S, NH3,
SO2, NOx, etc.
(10) Please do not make any modification on module.
(11) Please be cautious when soldering to board so as not to create a short between different trace
patterns.
(12) Do not impact or place pressure on this product because even a small amount of pressure can
damage the product. The product should also not be placed in high temperatures, high humidity
or direct sunlight since the device is sensitive to these conditions.
(13) When storing devices for a long period of time before usage, please following these guidelines:
* The devices should be stored in the anti-static bag that it was shipped in from
Seoul-Semiconductor with opening.
* If the anti-static bag has been opened, re-seal preventing air and moisture from being present
in the bag.
(14) LEDs and IC are sensitive to Electro-Static Discharge (ESD) and Electrical Over Stress (EOS).
The Acrich2 product should also not be installed in end equipment without ESD protection.
Below is a list of suggestions that Seoul Semiconductor purposes to minimize these effects.
a. ESD (Electro Static Discharge)
Electrostatic discharge (ESD) is the defined as the release of static electricity when two objects come
into contact. While most ESD events are considered harmless, it can be an expensive problem in
many industrial environments during production and storage. The damage from ESD to an LEDs may
cause the product to demonstrate unusual characteristics such as:
Rev1.1, Sep 10, 2015
15
www.seoulsemicon.com
Product Data Sheet
SMJQ-XC95W4PX – Acrich3 95W
Precaution for Use
- Increase in reverse leakage current lowered turn-on voltage
- Abnormal emissions from the LED at low current
The following recommendations are suggested to help minimize the potential for an ESD event.
One or more recommended work area suggestions:
- Ionizing fan setup
- ESD table/shelf mat made of conductive materials
- ESD safe storage containers
One or more personnel suggestion options:
- Antistatic wrist-strap
- Antistatic material shoes
- Antistatic clothes
Environmental controls:
- Humidity control (ESD gets worse in a dry environment)
b. EOS (Electrical Over Stress)
Electrical Over-Stress (EOS) is defined as damage that may occur when an electronic device is
subjected to a current or voltage that is beyond the maximum specification limits of the device.
The effects from an EOS event can be noticed through product performance like:
- Changes to the performance of the LED package
(If the damage is around the bond pad area and since the package is completely encapsulated
the package may turn on but flicker show severe performance degradation.)
- Changes to the light output of the luminaire from component failure
- Components on the board not operating at determined drive power
Failure of performance from entire fixture due to changes in circuit voltage and current across total
circuit causing trickle down failures. It is impossible to predict the failure mode of every LED exposed
to electrical overstress as the failure modes have been investigated to vary, but there are some
common signs that will indicate an EOS event has occurred:
- Damaged may be noticed to the bond wires (appearing similar to a blown fuse)
- Damage to the bond pads located on the emission surface of the LED package
(shadowing can be noticed around the bond pads while viewing through a microscope)
- Anomalies noticed in the encapsulation and phosphor around the bond wires
- This damage usually appears due to the thermal stress produced during the EOS event
c. To help minimize the damage from an EOS event Seoul Semiconductor recommends utilizing:
- A surge protection circuit
- An appropriately rated over voltage protection device
- A current limiting device
Rev1.1, Sep 10, 2015
16
www.seoulsemicon.com
Product Data Sheet
SMJQ-XC95W4PX – Acrich3 95W
Company Information
Published by
Seoul Semiconductor © 2013 All Rights Reserved.
Company Information
Seoul Semiconductor (www.SeoulSemicon.com) manufacturers and packages a wide selection of
light emitting diodes (LEDs) for the automotive, general illumination/lighting, Home appliance, signage
and back lighting markets. The company is the world’s fifth largest LED supplier, holding more than
10,000 patents globally, while offering a wide range of LED technology and production capacity in
areas such as “nPola”, "Acrich", the world’s first commercially produced AC LED, and "Acrich MJT Multi-Junction Technology" a proprietary family of high-voltage LEDs.
The company’s broad product portfolio includes a wide array of package and device choices such as
Acrich and Acirch2, high-brightness LEDs, mid-power LEDs, side-view LEDs, and through-hole type
LEDs as well as custom modules, displays, and sensors.
Legal Disclaimer
Information in this document is provided in connection with Seoul Semiconductor products. With
respect to any examples or hints given herein, any typical values stated herein and/or any information
regarding the application of the device, Seoul Semiconductor hereby disclaims any and all warranties
and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual
property rights of any third party. The appearance and specifications of the product can be changed
to improve the quality and/or performance without notice.
Rev1.1, Sep 10, 2015
17
www.seoulsemicon.com