Stripping Introduction C DIN IEC 60352 part 2 contains references to stripping faults which must be avoided: Correctly stripped conductor Possible faults during stripping: The conductor insulation has been damaged by the stripping tool Single conductors have been damaged or cut off by the stripping tool Insulation has not been cut properly Single conductors have been twisted too tightly afterwards Remains of the conductor insulation are still to be found on the stripped conductor Single conductors are no longer twisted. C.3 Stripping Stripping and cutting tools Stripping and cutting tools stripax® stripax® 16 • for flexible and solid conductors with PVC insulation • Cable with double insulation in two processing steps without special adjustment • Automatic opening of clamping jaws after stripping • No play in self-adjusting cutting unit • Long-lasting • No splicing of single conductors • Optimised ergonomic design • Stripping length adjustable via stop • Adjustable for different insulation thicknesses • switchable partial stripping function • Removable handle shells • Fold-out cutting protection • Custom marking with ESG device markers 0.08 - 10 mm² 6 - 16 mm² • S tripping: PVC insulated flexible conductor, size 0.08...10 mm² (~AWG 28...7) • Cutting: PVC insulated flexible conductor, size 0.08...6 mm² (~AWG 28...10) • Conductors undamaged due to special self adjusting stripping blades. • Processing of multi-conductors, with thin flat ribbon cables and even multiple conductors in one operation • S tripping: PVC insulated flexible and solid conductors (~AWG 10...6) • Cutting: PVC insulated flexible and solid conductors, up to 6 mm² (AWG 10) • Conductors undamaged due to special self adjusting stripping blades. C Technical data Max. stripping performance Cable type Conductor cross-section Stripping length, max. Cutting performance Max. cutting performance Tool data Length Weight stripax® Flexible and solid conductors with PVC insulation stripax® 16 Flexible and solid conductors with PVC insulation mm2 mm 0.08...10 6...16 25 25 mm2 6 6 190 190 175 175 mm g Note Ordering data Version Type stripax® Qty. 1 Type Qty. Order No. 9005000000 Type stripax® 16 Qty. 1 Order No. Type Qty. 1119030000 Spare stripping blades Order No. 9005610000 Note Accessories Spare stripping blades Note C.4 1 Order No. 1 1119040000