140 IDC Leiterplattenverbinder RM 2,54mm – Bauhöhen 7,5 / 6,0mm IDC Printed Circuit Connectors, 2.54mm Pitch – 7.5mm / 6.0mm Profiles Technische Daten / Technical Data Isolierkörper Thermoplastischer Kunststoff, nach UL94 V-0 Insulator Thermoplastic, rated UL94 V-0 Kontaktmaterial Kupferlegierung Contact Material Copper alloy Kontaktoberfläche Lt. Oberflächenoptionen, über Ni (1,3 ... 2,5µm) Contact Surface Acc. to options (see below), over Ni (1.3 ... 2.5µm) Lötbarkeit IEC 60512-12A Solderability IEC 60512-12A Durchgangswiderstand < 20mΩ Contact Resistance < 20mΩ Isolationswiderstand > 1000MΩ Insulation Resistance > 1000MΩ Spannungsfestigkeit 500VAC Test Voltage 500VAC Nennstrom 1A Current Rating 1A Temperaturbereich -40°C ... +105°C Temperature Range -40°C ... +105°C Verarbeitung Wellenlötverfahren Processing Wave soldering Series 140 Contacts * 64 08 10 14 16 18 20 22 24 26 28 30 34 40 50 60 64 Plating * 60 50 Verzinnt (Standard) Tin plated (Standard) 60 Sel. Au/Sn (Standard) Duplex Plating (Standard) 00 Vergoldet (auf Anfrage) Gold plated (on request) © W+P PRODUCTS Height * 7,5 7,5 H=7,50 B=6,00mm 6 H=6,00 B=5,60mm Colour (Optional) 6 [ ] Standard: Schwarz Standard: Black 6 Grau Grey * Dies ist ein Bestellbeispiel bitte durch Ihre Spezifikationen ersetzen. * This is an order example please replace by your specifications. TEL +49 5223 98507-0 FAX +49 5223 98507-50 E-MAIL [email protected] WEBSITE www.wppro.com 1 Informationen zum Wellen-Lötverfahren Wave Soldering Information Empfehlungen für das Wellenlötverfahren Recommendations for Wave Soldering Die Bauteile sollten bei einer Lötbadtemperatur von 260°C in max. 5 Sekunden verlötet werden. Items should be soldered at a solder temperature of 260°C in 5 seconds max. Empfohlenes Wellenlötprofil: Recommended wave soldering profile: TEL +49 5223 98507-0 FAX +49 5223 98507-50 2 E-MAIL [email protected] WEBSITE www.wppro.com