RN141S Diodes PIN diode RN141S zApplications High frequency switching zLand size figure zExternal dimensions (Unit : mm) 0.12±0.05 0.8 0.6 0.8±0.05 1.6±0.1 1.2±0.05 1.7 zFeatures 1) Ultra small mold type. (EMD2) 2) High frequency resistance is very small. EMD2 zStructure zConstruction Silicon epitaxial planer 0.3±0.05 0.6±0.1 ROHM : EMD2 JEDEC :SOD-523 JEITA : SC-79 dot (year week factory) zTaping dimensions (Unit : mm) 0.2±0.05 φ1.5±0.05 2.0±0.05 空ポケット 2.0±0.05 4.0±0.1 1.26±0.05 0 3.5±0.05 0.6 2.45±0.1 1.3±0.06 0 φ0.5 0.95±0.06 0 8.0±0.15 1.75±0.1 4.0±0.1 0.2 0.76±0.05 zAbsolute maximum ratings (Ta=25°C) Parameter Reverse voltage (repetitive peak) Reverse voltage (DC) Junction temperature Storage temperature Limits 50 100 150 -55 to +150 Symbol VR IF Tj Tstg Unit V mA ℃ ℃ zElectrical characteristic (Ta=25°C) Parameter Forward voltage Reverse current Capacitance between terminals Forward resistance Symbol VF IR Ct Min. - Typ. - Max. 1.0 0.1 0.8 Unit V µA pF Rf - - 2 Ω Conditions IF=10mA VR=50V VR=1.0V , f=1MHz IF=3mA,f=100MHz Rev.B 1/2 RN141S Diodes zElectrical characteristic curves 100 Ta=150℃ 10 Ta=125℃ 10 f=1MH 10 Ta=75℃ Ta=25℃ 1 Ta=-25℃ 0.1 1 Ta=75℃ 0.1 Ta=25℃ 0.01 Ta=-25℃ 0.001 0.0001 0 100 200 300 400 500 600 700 800 900 1000 1100 10 20 30 40 50 0 f=10MHz f=100MHz FORWARD VOLTAGE:VF(mV) Ta=25℃ VR=0V CAPACITANCE BETWEEN TERMINALS:Ct(pF) f=1MHz 10 20 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS 30 850 1 1 0.1 REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS 100 10 1 0.01 0 FORWARD VOLTAGE：VF(mV) VF-IF CHARACTERISTICS FORWARD OPERATING RESISTANCE:rf(Ω) CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ta=125℃ REVERSE CURRENT:IR(nA) FORWARD CURRENT:IF(mA) Ta=150℃ Ta=25℃ IF=10mA n=30pcs 840 830 820 810 AVE:826.1mV 0.1 1 FORWARD CURRENT:IF(mA) rf-IF CHARACTERISTICS 10 1 2 1000 VF DISPERSION MAP 1.5 1 1.6 1.4 1.2 1 0.8 AVE:0.137nA 0.4 Ta=25℃ f=1MHz VR=1V n=10pcs 0.9 CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ta=25℃ VR=50V n=30pcs 1.8 REVERSE CURRENT:IR(nA) 10 100 FREQUENCY(MHz) Ct-f CHARACTERISTICS 0.8 0.7 0.6 0.5 0.4 0.3 0.2 AVE:0.663pF 1.3 1.2 1.1 1 0.9 0.8 0.7 0.2 0.1 0.6 0 0 0.5 IR DISPERSION MAP Ct DISPERSION MAP Ta=25℃ f=100MHz IF=3mA n=10pcs 1.4 FORWARD OPERATING RESISTANCE:rf(Ω) 0.1 0.6 800 0.1 AVE:0.941Ω FORWARD CURRENT:IF(mA) rf DISPERSION MAP ELECTROSTATIC DISCHARGE TEST ESD(KV) 5 4 3 AVE:1.55kV 2 AVE:0.36kV 1 0 C=200pF R=0Ω C=100pF R=1.5kΩ ESD DISPERSION MAP Rev.B 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1