SHEET 1 OF 1 WHITE HOUSING (2) SWITCH FUNCTION Q950069 - LS0851500F050C1A SPECIAL (NO ACTUATOR) (SWITCH 'B' AS SEEN ON SWITCH FUNCION TABLE) MEASURED AT SWITCH 'A' O.P. 16.65 +/- 0.65mm D P.T. 2.90 +/- 0.40mm D 4.57 [.180 in] O.P. = OPERATING POINT P.T. = PRE-TRAVEL 4.75 (TYP) [.187 in] NC COM Q950070 - LS08515xxF050C1A SPECIAL NO RED PLUNGER (2) SEE Q950070 FOR ACTUATOR ARM SPECIFICS NC (SWITCH 'A' AS SEEN ON SWITCH FUNCTION TABLE) 35.24 [1.388 in] COM NO P.T. CIRCUIT: 2 SWITCHES BOTH WITH SPDT CONTACTS D O.P. NOTES: 1. ALL DIMENSIONS IN MM [INCH] 2. GENERAL TOLERANCE: X.X=`0.4 X.XX=`0.25 3. RATING: 15A @125/250VAC UL, CUL, VDE APPROVED 4. OPERATING FORCE: 55 ` 15 GRAMS 5. OPERATING TEMP: -25~C TO 85~C 6. ELECTRICAL LIFE: 50,000 CYCLES MIN. 7. MECHANICAL LIFE: 1,000,000 CYCLES TYP. 8. INSULATION RESISTANCE: 100 MEGA-OHMS MIN. 9. DIELECTRIC STRENGTH: 1500VAC 1 MINUTE (INITAL VALUE) 10. CONTACT RESISTANCE: 100 MILLI -OHMS MAX. 11. DENOTES CRITICAL PARAMETER. 12. 2002/95/EC (ROHS) COMPLIANT. 13. SEE ROUTING WORK INSTRUCTIONS FOR FIXTURING / ASSEMBLY DETAILS 14. ADHESIVE: USE ONLY 'POWER POXY #21801' .005 OZ. PER ASSEMBLY (#Z100002). D 18976 OPERATING FORCE, O.P., P.T. ADDED 3/30/10 BLR C 18653 Released For Production 10/6/09 BLR B n/a TOOLING RELEASE - DWG CHANGES 5/27/09 BLR REV PCR NO DATE BY DESCRIPTION THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROPRIETARY TO E-SWITCH AND IS NOT TO BE COPIED OR TRANSFERRED TITLE SCALE LS08515 SPEC. HAPP 1.5:1 DATE DR 3/30/2010 BLR REV DWG XQ0041A D