fdc60 I s o l a t e d a n d R e gulated 60 WATT Modular DC/DC Converters series Wide 2 : 1 Input Range High Efficiency Regulated Outputs 1600V Isolation Full EMI Shielding PI Input Filter Unit measures 2.76”W x 3.94”L x 0.75”H Model Number Output Voltage Output Amps Input Range SINGLE OUTPUT FDC60-12S33 3.3 VDC FDC60-24S33 FDC60-48S33 FDC60-12S05 5 VDC FDC60-24S05 FDC60-48S05 FDC60-12S12 12 VDC FDC60-24S12 FDC60-48S12 FDC60-12S15 15 VDC FDC60-24S15 FDC60-48S15 15 15 15 12 12 12 5 5 5 4 4 4 9-18 VDC 18-36 VDC 36-72 VDC 9-18 VDC 18-36 VDC 36-72 VDC 9-18 VDC 18-36 VDC 36-72 VDC 9-18 VDC 18-36 VDC 36-72 VDC DUAL OUTPUT FDC60-12D3305 3.3 / 5 VDC FDC60-24D3305 FDC60-48D3305 FDC60-12D05 +/-5 VDC FDC60-24D05 FDC60-48D05 FDC60-12D12 +/-12 VDC FDC60-24D12 6 / 6 6 / 6 6 / 6 +10 / -2 +10 / -2 +10 / -2 +/-2.5 +/-2.5 9-18 VDC 18-36 VDC 36-72 VDC 9-18 VDC 18-36 VDC 36-72 VDC 9-18 VDC 18-36 VDC WWW.ASTRODYNE.COM UL E193009; TUV R2054535; CB JPTUV-001393 ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 fdc60 I s o l a t e d a n d R e gulated 60 WATT Modular DC/DC Converters INPUT SPECIFICATIONS Input Voltage Ranges: Input Filter series GENERAL SPECIFICATIONS 12 VDC Nominal 24 VDC Nominal 48 VDC Nominal Pi Type 9-18 VDC 18-36 VDC 36-72 VDC OUTPUT SPECIFICATIONS Voltage and Current See Selection Chart Load Regulation (10%-FL) singles/duals: +/-0.5% xxD3305 Models 3.3V output min load=800mA Line Regulation singles/duals: +/-0.5% Temperature Coefficient +/-0.02%/DegC Ripple/Noise 1% Pk-Pk of Vout, typ Voltage Stability +/- 2% Short Circuit Protection Continuous, self-recovering Overvoltage Protection Threshold:3.3V Output 3.9Volts 5V Output 6.2Volts 12V Output 15Volts 15V Output 18Volts All specifications are typical at nominal input, full load, and 25DegC unless otherwise noted * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. WWW.ASTRODYNE.COM On/Off Control Input-Out Isolation Isolation Resistance Efficiency Switching Frequency (Ref to - Input pin) Logic “1”/Open=ON Logic “0”/GND=OFF 1600VDC 10000 M Ohms 83%, typ 200Khz, typ ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Storage Temperature Maximum Case Temp MTBF -25 to +71 DegC(see derate) -55 to +125 DegC * 100 DegC * 1.53 MHrs MIL-HDBK-217F TA=25C FL PHYSICAL SPECIFICATIONS Case Material Construction Weight Nickel-Coated Copper Non-Conductive Base Fully Encapsulated 9.71 oz, (272g) Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 fdc60 I s o l a t e d a n d R e gulated 60 WATT Modular DC/DC Converters series MECHANICAL DIMENSIONS 0.05 (1.3) 3.94 (100.2) 6 0.98 (25.0) 7 2 1.00 (25.4) Bottom View 8 9 3 Mounting inserts: #4-40 0.39 (10.0) 10 0.30 (7.6) 3.25 (82.6) 2.76(70.0) 0.39 0.39 0.39 (10.0) (10.0) (10.0) 1 5 1.00 (25.4) 1.00 (25.4) 0.39 0.39 0.39 0.39 0.39 0.39 (10.0) (10.0) (10.0) (10.0) (10.0) (10.0) 4 1.00 (25.4) 0.32 (8.0) 0.75 (19.0) All dimensions in Inches (mm) Pin Pitch tolerance ±0.014 (0.35) Pin # SingleDual 1 2 3 4 5 6 7 8 9 10 + Vin - Vin Ctrl Trim + Vout + Vout Com Com No Pin No Pin + Vin - Vin Ctrl Trim + Vout or 3.3 out + Vout or 3.3 out Com Com - Vout or 5 out - Vout or 5 out OUTPUT DERATING CURVE 100 90 Output Power (%) 80 70 60 590 LFM Airflow 50 40 30 20 10 0 -25 0 25 50 75 100 125 Ambient Temperature °C WWW.ASTRODYNE.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458