ASD03 I sol at e d a n d R e gul at ed 3 WATT Modular DC/DC Co n ve rte rs series 24-Pin DIP Package Wide 2:1 Input Range 500 or 1500V Isolation Short Circuit Protection High Efficiency Input PI Filter Unit measures 0.8”W x 1.25”L x 0.5”H Model Number Output Voltage Output mAmps Input Range Efficiency SINGLE OUTPUT ASD03-12S3(H orM)* 3.3 VDC ASD03-24S3(H orM)* ASD03-48S3(H orM)* ASD03-12S5(H or M)* 5 VDC ASD03-24S5(H or M)* ASD03-48S5(H or M)* ASD03-12S12(H or M)* 12 VDC ASD03-24S12(H or M)* ASD03-48S12(H or M)* ASD03-12S15(H or M)* 15 VDC ASD03-24S15(H or M)* ASD03-48S15(H or M)* 600 600 600 600 600 600 250 250 250 200 200 200 9-18 VDC 18-36 VDC 36-72 VDC 9-18 VDC 18-36 VDC 36-72 VDC 9-18 VDC 18-36 VDC 36-72 VDC 9-18 VDC 18-36 VDC 36-72 VDC 70% 73% 71% 73% 74% 76% 78% 80% 77% 76% 80% 77% DUAL OUTPUT ASD03-12D5(H or M)* +/-5 VDC ASD03-24D5(H or M)* ASD03-48D5(H or M)* ASD03-12D12(H or M)* +/-12 VDC ASD03-24D12(H or M)* ASD03-48D12(H or M)* ASD03-12D15(H or M)* +/-15 VDC ASD03-24D15(H or M)* ASD03-48D15(H or M)* +/-300 +/-300 +/-300 +/-125 +/-125 +/-125 +/-100 +/-100 +/-100 9-18 VDC 18-36 VDC 36-72 VDC 9-18 VDC 18-36 VDC 36-72 VDC 9-18 VDC 18-36 VDC 36-72 VDC 73% 74% 76% 76% 80% 76% 75% 78% 76% “H” versions only * Specifying “H” or “M” designates a choice of Pinouts (Please see Mechanical Specifications) and a choice of 500VDC Isolation (“M” Version) or 1500VDC Isolation (“H” Version). WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ASD03 I sol at e d a n d R e gul at ed 3 WATT Modular DC/DC Co n ve rte rs INPUT SPECIFICATIONS Input Voltage Ranges: Input Filter series GENERAL SPECIFICATIONS 12 VDC Nominal 24 VDC Nominal 48 VDC Nominal PI Type 9-18 VDC 18-36 VDC 36-72 VDC OUTPUT SPECIFICATIONS Voltage and Current See Selection Chart Load Regulation Single (10% to FL) Dual (25% to FL) Line Regulation (HL-LL) Temperature Coefficient +/-0.05%/°C Ripple/Noise(Single/Dual)3.3V/5V 100mVp-p max. 12V/15V Voltage Accuracy +/- 2% Short Circuit Protection Continuous Voltage Balance (Dual) +/-1% Efficiency See Selection Chart +/- 0.5% +/-1% +/- 0.5% 1% p-p max. Input-Output Isolation Isolation Resistance Switching Frequency Conducted EMI Safety 500VDC (“M” Versions) 1500VDC (“H” Versions) 10-9nth Ohm min. 100Khz Meets EN55022 Class B UL, cUL - “H” Versions Only ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Case Temperature Storage Temperature Cooling MTBF Single O/P Dual O/P MIL-HDBK-217F -25 to +71°C 100°C max. -40 to +100°C * Free Air Convection 1,203,000 Hrs. 1,145,000 Hrs. Ground Benign, 25°C PHYSICAL SPECIFICATIONS Case Material Construction Weight Dimensions Black coated Copper w. Non-conductive base Fully Encapsulated 0.5 oz, (13g) 1.25” x 0.8” x 0.5” All specifications are typical at nominal input, full load, and 25DegC unless otherwise noted * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ASD03 I sol at e d a n d R e gul at ed 3 WATT Modular DC/DC Co n ve rte rs MECHANICAL DIMENSIONS NOTE: Pin Size is 0.02” Inch (0.5mm) DIA All Dimensions In Inches (mm) Tolerance .xx = +/-0.02, .xxx = +/- 0.010 “M” Version “H” Version Pin # Single Single 1 2 3 5 9 10 11 12 13 14 15 16 22 23 24 +Input +Input No Pin NC -Output-Input NC Common-Input No Pin No Pin No Pin No Pin No Pin NC -Output CommonNC +Output+OutputNC -Input -Input No Pin -Input -Input No Pin +Output+Output+Output -Output CommonNC No Pin No Pin -Output NC Common+Input NC -Output+Input +Input +Input No Pin Dual series Dual No Pin -Input -Input No Pin Common NC -Output No Pin No Pin +Output NC Common +Input +Input No Pin NC = No Connection with Pin WWW.ASTRODYNETDI.COM 0315 ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458