Datasheet_GSW-2452T 19” 24-port Gigabit Switch LevelOne’s new Gigabit Ethernet Switch, GSW-2452T is equipped with 24 10/100/1000 Mbps-port Ethernet connections. Each RJ-45 port can auto negotiate for the best possible performance running either in full or half duplex mode. Auto-MDIX is also supported on all ports which allows uplinking to another switch-free cross-over or straight cable selection. Half-and full-duplex flow control prevents packets from being dropped under heavy loading. The GSW-2452T supports “store and forward” mode of operation to ensure that only whole packets with a good CRC are passed to the destination. GSW-2452T gigabit switch is "Plug-&-Play". It does not require software configuration. Users can immediately use any of the features of this product simply by attaching the cables and turning on the power. For instant error detection, the switch is equipped with a full range of LEDs to help you monitor and troubleshoot problems on your network. Offering compact design (441 mm x 196 mm x 44 mm) the GSW-2452T supports reliable operations in extreme operating environments. GSW-2452T Based on familiar, proven Ethernet technology, GSW-2452T provides 48Gbps of aggregate bandwidth to improve network performance and throughput for multi-media, video streaming and real-time broadcast applications to ensure current investment to meet the future requirement. Key Features Complies with IEEE 802.3ab, IEEE 802.3 and IEEE 802.3u standard 48Gbps internal switching bandwidth Supports Auto-negotiation on all ports Supports Auto MDI/MDIX Store –and-forward switching ensures errorfree transmission Wire-speed packet filtering and forwarding rate Supports Jumbo Frame (Up to 9K bytes) Full duplex IEEE 802.3x flow control Half-duplex back pressure flow control Supports Plug-and-Play, nothing to configure “At-a-glance” LEDs for port and system status monitoring 19”, 1U rack-mountable size Datasheet_GSW-2452T Technical Specification Standards Compliance Jumbo Frame IEEE 802.3 (Ethernet) IEEE 802.3u (Fast Ethernet) IEEE 802.3ab (Gigabit Ethernet) IEEE 802.3x Flow Control 9KB LEDs Per Device: Power Per RJ-45 port: Speed(10/100/1000Mbps), Link/Act Ports Power Input 24 x 10/100/1000 Base-T RJ-45 ports 100~240VAC, 50/60Hz Forwarding Mode Power Consumption Store and Forward 45 Watts (max) Cabling 10base-T: 2-pair UTP/STP Cat.3 or higher, Up to 100 m 100Base-TX: 4-pair UTP/STP Cat. 5, Up to 100 m 1000Base-TX: 4-pair UTP/STP Cat.5, Up to 100 m Temperature Operating: 0~40ﾟC (32~104ﾟF) Storage: -30~90ﾟC (-22~194ﾟF) Humidity MAC Address Table Operating: 10% ~ 90% non-condensing Storage: 5%~90% non-condensing 8K entries RAM Buffer Dimension 512KB 441mm(W) * 196mm(D) * 44mm(H) Flow Control EMI and Safety Half Duplex: backpressure Full Duplex: pause frame FCC, CE Product Diagram GSW-2452 Diagram Ordering Information GSW-2452T: 24-Port Gigabit Switch