HDSpider™ HDMI 1.3 over Single Cat.5 Distribution Series

HDSpider™ HDMI 1.3 over Single Cat.5 Distribution Series
HVE-9000
HVE-9001
HVE-9002
HVE-9003
HVE-9004
HVE-9008
HVE-9900
User Manual
Ver.:2.0-1003
TABLE OF CONTENTS
p.2 Package Contents
p.3 Overview
p.4 Panel Description
p.14 Installation
p.20 Systematic Application Diagrams
p.21 Frequently Asked Questions
p.22 Specifications
p.25 Notice
p.26 Pin Definition
1
PACKAGE CONTENTS
HVE-9000
HDSpider™ Long Range Cat.5 HDMI Receiver
1. HDSpider™ Long Range Cat.5 HDMI Receiver (HVE-9000)
2. 5V 2A DC Power Supply Unit
3. User Manual
HVE-9001
HDSpider™ Cat.5 HDMI Sender
1. HDSpider™ Cat.5 HDMI Sender (HVE-9001)
2. 5V 2A DC Power Supply Unit
3. User Manual
HVE-9002
HDSpider™ Cat.5 HDMI Sender with Local HDMI Output
1. HDSpider™ Cat.5 HDMI Sender with Local HDMI Output (HVE-9002)
2. 5V 4A DC Power Supply Unit
3. User Manual
HVE-9003
HDSpider™ Cat.5 Cascadable HDMI Sender
1. HDSpider™ Cat.5 Cascadable HDMI Sender (HVE-9003)
2. 5V 4A DC Power Supply Unit
3. User Manual
HVE-9004
HDSpider™ 4-Port Cat.5 HDMI Sender
1. 4-Port HDSpider™ HDMI Cat.5 Sender (HVE-9004)
2. 5V 4A DC Power Supply Unit
3. User Manual
HVE-9008
HDSpider™ 8-Port Cat.5 HDMI Sender with Local HDMI Output
1. 8-Port HDSpider™ HDMI Cat.5 Sender (HVE-9008)
2. 5V 4A DC Power Supply Unit
3. User Manual
HVE-9900
HDSpider™ Short Range Cat.5 HDMI Receiver
1. HDSpider™ Short Range Cat.5 HDMI Receiver (HVE-9900)
2. User Manual
2
OVERVIEW
Introduction
The HDSpider™ HDMI 1.3 over Single Cat.5 Distribution Series provides the most
flexible solution by which the uncompressed, unmodified, and pure digital HDMI
signals with 7.1-channel audio can be transmitted to different locations over a long
distance. The cascadability of HDSpider™ series is virtually unlimited, allowing you
to extend HDMI/DVI displays almost anywhere.
The whole HDSpider™ series products can be easily inter-connected to suit almost every
application through Cat.5/5e/6 cables. By taking the advantage of Cat.5/5e/6 cables,
installation work becomes so easy and particularly cost effective wherever the distribution of
HDMI signals is required.
Features
The HDSpider™ HDMI 1.3 over Single Cat.5 Distribution Series offers the users:
— Silicon Image (founder of HDMI) chipset embedded
— HDMI signal transmission via Cat.5/5e/6 cables
— Cat.5/5e/6 cable implementation to minimize use of high-cost HDMI cable
— Minimum 40m extension for 1080p resolution*
— Maximum extension up to 80m**
— Uncompressed, unmodified HDMI with 7.1-channel audio/video pure digital
transmission
— Cascading virtually unlimited for HVE-9003
— Compliant with HDMI 1.2 / 1.3
— Build in 8-level signal level equalizer to fine tune video quality
— EDID learning ability to read and store the EDID information of the display to
avoid any incompatibility among displays
— Software not required, purely hardware installation. Virus risk free
Note: The length depends on the characteristics and quality of the cables. Higher resolutions
and longer transmission distances require low skew cables (<25ns/100m) for best performance.
*single link of HVE-9000. For connection with HVE-9900, 1080p distance at minimum 15m.
**single link at 480p resolution, with high quality, minimal delay skew Cat-6 cable
3
PANEL DESCRIPTION
HVE-9000
HDSpider™ Long Range Cat.5 HDMI Receiver
Input Panel
HDMI Signal IN: Connect to the HDMI Signal OUT port on the HVE-9001, HVE-9002, HVE-9004,
or HVE-9008 with a Cat.5e/6 cable.
+5V DC: Connect to 5V 2A DC power supply.
Output Panel
Signal Level: Adjust the 8-level signal equalization control to the received HDMI signals.
The HDMI signal level varies from 0 (strongest) to 7 (weakest) for respective
transmission length from longest possible range to short distance. Dial the Signal
Level from 7 to 0 and stop turning the rotary switch whenever the audio/video is
playing normally. Inappropriate signal level setting may cause overpowering issues
that would shorten the product’s life significantly!
HDMI OUT: Connect to a HDMI display with a HDMI male-male cable.
4
HVE-9001
HDSpider™ Cat.5 HDMI Sender
Output Panel
HDMI IN: Connect to a HDMI source with a HDMI male-male cable
Mode: 0 = HDMI mode with surround sound (up to 7.1ch) audio output
1 = HDMI mode with stereo (2ch) audio output
2 = DVI mode
3 ~ 5 = Not in use
6 = Use default EDID profile
7 = Learn the EDID from the display*
Note for EDID (Extended Display Identification Data) learning
1. Connect the display which you want to read EDID with a HDMI cable to HDMI-IN on
HVE-9001 and dial MODE to 7 so the HVE-9001 can learn the EDID information from the
connected display. The LED on the RJ-45 connector will dim and bright again in a few
seconds, which indicates the EDID learning process is complete.
2. Dial MODE clockwise [3] from 7 to 0 or 1 for desirable audio setting and enjoy the
experience. DO NOT let the rotary control arrow pass by 6. Doing so will erase the
EDID just learned and restore the default EDID profile.
Output Panel
+5V DC: Connect to 5V 2A DC power supply unit.
HDMI Signal OUT: Connect to the HDMI Signal IN of the HVE-9000 or HVE-9900 with a
Cat.5e/6 cable.
5
HVE-9002
HDSpider™ Cat.5 HDMI Sender with Local HDMI Output
1
2
3
4
5
6
7
1. Input video format indicator [lights up for HDMI signal, lights off for DVI signal]
2. DIP switch [see table below]
3. HDMI IN: Connect a HDMI source with a HDMI male-male cable here
4. Audio OUT: Plug in a local speaker here
5. HDMI OUT: Local HDMI for connecting to a HDMI display with a HDMI male-male cable
here or cascade to the HDMI IN of another HVE-9001, HVE-9002, HVE-9004, or HVE-9008.
6. HDMI Signal OUT: Link to HVE-9003 for cascading; or link to HVE-9000 or HVE-9900 to
another HDMI display with a Cat.5e/6 cable
7. +5V DC: Connect to a 5V 4A DC power supply unit
DIP Switch
DIP Switch Position
Pin-1
Pin-2
Video
Audio
OFF [©]
OFF [©]
Up to
1080p
Stereo1
Default Mode2 – 1080p & stereo audio output for
most HDTVs
ON [ª]
720p
1080i
Stereo
Safe Mode3 – Enforce the system output at
720p/1080i video and stereo audio for basic
compatibility among HDTVs
ON [ª]
OFF [©]
Bypass4
Bypass4
EDID Learning Mode5 – for learning EDID from the
display while playing any received HDMI audio
format
ON [ª]
ON [ª]
Bypass
Stereo
EDID Learning & Stereo mode5 – for learning EDID
from the display while enforcing stereo output if
any HDTV cannot play surround sound normally
OFF [©]
Description
6
Note for EDID (Extended Display Identification Data) learning
1. Don’t plug in HDMI cable to [HDMI In] when you want to restore default EDID or learn the
display’s EDID.
2. Please connect the display which you want to read EDID to HDMI OUT so the HVE-9002
can learn the EDID information from the connected HDTV.
3. To learn EDID from HDMI display, pull up-and-down the DIP switch 1 from OFF to ON, the
green light will dim and light to indicate the EDID learning process is complete. You
DON’T NEED to pull up the DIP switch again unless you want to learn another EDID by
pulling DIP switch 1 up and down.
Note
1
If the HDTV shows video but without audio, please try to set audio mode to stereo.
2Factory
default: Pin#1-OFF[©], Pin#2- OFF[©] for 1080p with stereo.
3 If
you encounter any unsolved audio/video output problem during system installation,
please turn to Safe Mode (Pin#1-OFF[©] & Pin#2-ON[ª]) to enforce the most compatible
720p stereo output for system check.
4 Bypass
means the matrix will maintain playing the original format of HDMI signals in video
and perhaps audio. By setting at this mode, the users may encounter compatibility issue
among different kinds of HDMI sources and displays. If you cannot get the audio and/or
video output normally at the system installation, please change the DIP switch setting to
default mode or even safe mode to verify the functionality of the device.
5 Set
Pin#1 at ON[ª] first then connect the HDMI Input to HDTV through a HDMI cable. Wait
for 20 seconds. The EDID learning procedure will be finished. If you want to learn the EDID
from another HDTV, you must set Pin#1 at OFF first and repeat this procedure.
7
HVE-9003
HDSpider™ Cat.5 Cascadable HDMI Sender
1
2
3
4
5
6
7
1. Input video format indicator [lights up for HDMI signal, lights off for DVI signal]
2. Signal Level: Adjust the 16-level equalization control corresponding to the
transmission distance of receiving HDMI signals. For surround sound audio
output, please adjust from 0-to-7 (longest-to-shortest transmission length). For
stereo audio output, please adjust from 8-to-F (longest-to-shortest transmission
length). It is recommended to adjust from 7-to-0 or from F-to-8 to find the
optimal visual experience.
3. HDMI Signal IN: Link to HVE-9001,HVE-9002, HVE-9003, HVE-9004, or HVE-9008 with a
Cat.5e/6 cable
4. Audio OUT: Plug in a local speaker here
5. HDMI OUT: Local HDMI for connecting to a HDMI display with a HDMI male-male cable
here or cascade to the HDMI IN of another HVE-9001, HVE-9002, HVE-9004 or HVE-9008.
6. HDMI Signal OUT: Link to HVE-9003 for cascading; or link to HVE-9000 or HVE-9900 to
another HDMI display with a Cat.5e/6 cable
7. +5V DC: Connect to a 5V 4A DC power supply unit
8
HVE-9004
HDSpider™ 4-Port Cat.5 HDMI Sender
DIP Switch: Please see more detail in the table below
HDMI INPUT: Connect to a HDMI source
HDMI Signal OUTPUT 1 – 4: Link to each HDMI display via a Cat.5e/6 cable with HVE-9000,
HVE-9003, or HVE-9900.
USB: For firmware update (technical support use only)
+5V DC: interlocking power jack for 5V DC power supply unit
DIP Switch
DIP Switch Position
Pin-1
Pin-2
OFF [©]
OFF [©]
ON [ª]
ON [ª]
Video
Audio
OFF [©]
Up to 1080p
Stereo1
Default Mode2 – Up to 1080p & stereo audio
output for most HDTVs
ON [ª]
Up to
720p/1080i
Stereo1
Safe Mode3 – Enforce the system output at
720p/1080i video and stereo audio for basic
compatibility among HDTV
OFF [©]
Bypass4
Bypass4
EDID Learning5 Mode – for learning EDID from
the display while playing any received HDMI
audio format
Stereo
EDID Learning5 & Stereo Mode – for learning
EDID from the display while enforcing stereo
output if any HDTV cannot play surround sound
normally
ON [ª]
Bypass4
Description
9
Note for DIP switch
1
If the HDTV shows video but without audio, please set audio mode to stereo.
2
Factory default setting is pin-1 at OFF [©], pin-2 at OFF [©] for 1080p with stereo.
3
If you encounter any unsolved audio/video output problem during system installation,
please dial the DIP switch to pin-1 at OFF [©], pin-2 at ON [ª] for safe mode to enforce
the most compatible 720p stereo output for system check. However, the safe mode
cannot be initiated if your HDMI sources are set to enforce 1080p output. In this case,
please reconfigure your HDMI source to all resolution output for troubleshooting.
4
Bypass means this device will maintain playing the original format of HDMI signals in
video and perhaps audio. By setting at this mode, the users may encounter
compatibility issue among different kinds of HDMI sources and displays. If you cannot
get the audio and/or video output normally at the system installation, please change
the DIP switch setting to default mode or even safe mode to verify the functionality of
the device.
5
For EDID learning function please see the next section.
EDID Learning
1. To make the HVE-9004 learn the EDID of the desired display, connect the display to
the HDMI INPUT port via a HDMI cable.
2. Set the DIP switch position pin-1 at ON [ª].
3. Reboot the HVE-9004 and you should see the green LED SIGNAL on the front panel
blinking to indicate the EDID learning sequence is underway. The EDID learning
sequence is complete when the LED stops blinking.
4. Resume the installation. Connect the sources back to HDMI inputs and let the
displays connect to the receiver units via Cat.5e/6 cable.
5. Set the DIP switch pin-1 at OFF [©] will erase the EDID profile learned from the display
and restore the default EDID profile. So please do not dial the pin-1 back to OFF [©]
unless you want to use default EDID profile or learn new EDID from different HDMI
display.
10
HVE-9008
1
HDSpider™ 8-Port Cat.5 HDMI Sender with Local HDMI Output
2
3
5
4
1. +5V DC: Connect to a 5V DC power supply unit
2. HDMI IN: Connect to a HDMI source
3. HDMI OUT: Connect to a HDMI display for local monitoring or cascade to another HDMI
sender (HVE-9001, HVE-9004, or HVE-9008)
4. MODE:
0 = [Video] – supports up to HDMI 1.3 output. [Audio] – supports up to 7.1ch output
1 = [Video] – supports up to HDMI 1.3 output. [Audio] – locks to stereo audio output
2 = [Video] – locks to HDMI 1.2 output. [Audio] – supports up to 7.1ch output
3 = [Video] – locks to HDMI 1.2 output. [Audio] – locks to stereo audio output
4 = [Video] – DVI display mode. [Audio] – no audio output
5 = [Safe Mode] – uses default EDID with video supported up to 720p/1080i
6 = [Default Mode] – uses default EDID with video supported up to 1080p
7 = [EDID Learning Mode] – learns EDID from the display
[For more detail info, please refer to page 6.]
5. HDMI Signal OUTPUT 1–8: Link to each HDMI display via a Cat.5e/6 cable with a receiver
HVE-9000 or HVE-9900 on each CAT5 output port
Audio/Video Setting
1. If you cannot get the audio/video output from the connected display for the first time
setup. Please follow the instructions below to check if the HVE-9008 is OK.
Step 1 – Please set the rotary arrow at Mode 5 for Safe Mode, and wait for the green LED
SIGNAL on the front panel to blink for a couple seconds.
Step 2 – Please dial the rotary arrow counterclockwise [4] from Mode 5 to Mode 3. If you can
get audio/video from the display, you can stay tune at this setting for 720p or 1080i and
stereo audio. If you need to get 720p/1080i with 7.1ch audio output, please dial the
rotary arrow counterclockwise [4] from Mode 3 to Mode 2.
Step 3 – Please dial the rotary arrow counterclockwise [4] from Mode 3 to Mode 7. Wait a few
seconds until the green LED SIGNAL on the front panel dims and then lights again.
Step 4 – Please dial the rotary arrow clockwise [3] from Mode 7 to Mode 1. You should have
normal audio/video output. If not, please contact technical support.
11
2. For desirable 1080p video output, please follow the instructions below:
Step 1 – Please set the rotary arrow at Mode 6 for Default Mode, and wait for the green LED
SIGNAL on the front panel to blink for a couple seconds.
Step 2 – Please dial the rotary arrow clockwise [3] from Mode 6 to Mode 1. If you can get
audio/video from the display, you can stay tune at this setting for 1080p and stereo
audio. If you need to get 1080p with 7.1ch audio output, please turn the rotary arrow
counterclockwise [4] from Mode 1 to Mode 0. If you cannot get the audio/video out
normally, please go on the next step.
Step 3 – Please dial the rotary arrow counterclockwise [4] from Mode 0 or Mode 1 to Mode 7.
Wait a few seconds until the green LED SIGNAL on the front panel dims and then lights
again.
Step 4 – Please dial the rotary arrow clockwise [3] from Mode 7 to Mode 0 or Mode 1. You should
have your desirable audio/video output. If not, please perform the EDID learning
sequence.
EDID Learning
To learn EDID from the HDMI display, please follow the instruction below:
Step 1 – Please connect the display which you want to read EDID with a HDMI cable to the HDMI
OUT port of the AT-HD19SS and set the rotary arrow at Mode 7 so the HVE-9008 can learn
the EDID information from the connected display. The green LED SIGNAL on the front
panel will dim and light again in a few seconds, which indicates the EDID learning
procedure is complete.
Step 2 – Please turn the rotary arrow clockwise [3] from Mode 7 to Mode 0 or Mode 1 for
desirable audio setting and enjoy the experience. DO NOT let the rotary arrow pass by
Mode 5 and Mode 6 which will erase the EDID just learned and restore the default EDID.
12
HVE-9900
HDSpider™ Short Range Cat.5 HDMI Receiver
RJ-45 socket: Link from HVE9001, HVE-9002, HVE-9003, HVE-9004, HVE-9008 or HVE-9900 with
a Cat.5e/6 cable
HDMI socket: Connect to a local HDMI display or projector, or the HDMI output of HVE-9002
or HVE-9003 for HDMI over Cat.5 transmission
13
INSTALLATION
Extends HDMI signals to one display at longer distance
HVE-9000 & HVE-9001
1. Connect HVE-9001 to a HDMI source device with a HDMI cable.
2. Connect HVE-9000 to a HDMI display or projector with a HDMI cable.
3. Connect a Cat.5e/6 cable between HVE-9000 and HVE-9001.
4. Make sure this Cat.5e/6 cable is tightly connected and not loose.
5. Plug in a 5V DC power supply unit to the power jack of HVE-9000.
6. Plug in another 5V DC power supply unit to the power jack of HVE-9001.
7. If the image on the display is flickering or blinking, adjust the rotary control
switch to improve the cable skew. 0 stands for the strongest HDMI signal level for
longest possible transmission length while 7 stands for the weakest HDMI signal
level for short transmission length. Use a screw driver to adjust the signal level
from 7 to 0 and stop turning the rotary switch whenever the audio/video is
playing normally. Inappropriate signal level setting may cause overpowering
issue that would shorten the product life significantly!
Blu-ray Disc player
HDMI cable
HVE-9001
HDTV
HVE-9000
HDMI cable
Cat.5e/6 cable
14
Extends HDMI signals to one display at shorter distance
HVE-9900 & HVE-9001
1. Connect HVE-9001 to a HDMI source with a HDMI cable.
2. Connect HVE-9900 directly to your HDMI display or projector.
3. Connect one Cat.5e/6 cable between HVE-9001 and HVE-9900.
4. Make sure this Cat.5e/6 cable is tightly connected and not loose.
5. Plug in the 5V DC power supply unit to the power jack of HVE-9001.
HDMI source
HDMI cable
HVE-9001
HDTV
HVE-9900
Cat.5e/6 cable
15
Extends HDMI signals to next cascading device with one local display
HVE-9002
1. Switch off all devices, including displays.
2. Connect a local HDMI display to the HDMI out of the HVE-9002 and then
connect a speaker to the 3.5mm audio socket.
3. Connect to a HDMI source (such as a Blu-Ray Disc player)
4. Connect HVE-9002 to HVE-9003 (for cascading), to HVE-9000 (to HDTV at long
range), or HVE-9900 (to HDTV at mid range) via RJ-45 Out by a Cat.5e cable.
5. Plug in 5V4A DC power supply unit.
6. Power on the HDTV.
7. Power on the HDMI source.
HDMI source
HDMI cable
HVE-9002
Cat.5e cable
Audio cable
HDMI cable
HVE-9003
HVE-9000
Speaker
HVE-9900
HDTV
16
Relays HDMI signals to next cascading device with one local display
HVE-9003
1. Switch off all devices, including displays.
2. Connect a local HDMI display to the HDMI Out of the HVE-9003 and then
connect a speaker to the 3.5mm audio socket.
3. Connect to HVE-9003 via RJ-45 in by a Cat.5e cable.
4. Connect to next HVE-9003 (for cascading), to HVE-9000 (to HDTV at long range),
or HVE-9900 (to HDTV at mid range) via RJ-45 out by a Cat.5e cable.
5. Plug in 5V4A DC power supply.
6. Power on the HDTV.
HVE-9002
Cat.5e cable
HVE-9003
Cat.5e cable
Audio cable
HDMI cable
HVE-9003
HVE-9000
Speaker
HVE-9900
HDTV
17
Broadcasts HDMI signals to 4 remote displays from one video source
HVE-9004
1. Switch off all devices, including displays.
2. Connect a HDMI source device to the HDMI INPUT port.
3. Connect the HVE-9000 and/or HVE-9900 as receivers via solid Cat.5e/6 cables
to each HDMI Signal OUTPUT port.
4. Plug in the interlocking 5V 4A DC power supply unit.
5. Power on the HDMI displays.
6. Power on the HDMI sources.
HDMI source
HDMI cable
HVE-9004
Cat.5e/6 cable up to 60m (200ft)
Cat.5e/6 cable
up to 25m (80ft)
HVE-9000
HVE-9900
HDTV#1
HDMI cable
HDTV#2
18
HDTV#3
HDTV#4
Broadcasts HDMI signals to 8 remote displays from one video source
HVE-9008
1. Switch off all devices, including displays.
2. Connect a HDMI source device to the HDMI INPUT port.
3. Connect the HVE-9000 and/or HVE-9900 as receivers via solid Cat.5e/6 cables to
each HDMI Signal OUTPUT port.
4. Plug in the interlocking 5V 4A DC power supply unit.
5. Power on the HDMI displays.
6. Power on the HDMI sources.
HDMI source
HDMI cable
HVE-9008
Cat.5e/6 cable
up to 25m (80ft)
Cat.5e/6 cable up to 60m (200ft)
HVE-9000
HVE-9900
HDTV#1
HDMI cable
HDTV#2
19
HDTV#3
HDTV#4
SYSTEMATIC APPLICATION DIAGRAM
HVE-9002 & HVE-9003 with HVE-9000 & HVE-9900
HDMI source
HDMI cable
HDTV
Speaker
HVE-9002
Audio cable
HDMI cable
HDTV
Cat.5e cable
Speaker
HVE-9003
Audio cable
HDMI cable
Cat.5e cable
HDTV
HVE-9003
Speaker
Audio cable
Cat.5e cable
HVE-9000
Cat.5e cable
HDMI cable
HDTV
HVE-9900
20
FREQUENTLY ASKED QUESTIONS
How does equalizer
(EQ) work?
Equalizer is a built in electronic device used to fine
tune picture quality. Please turn knob anticlockwise
from 7 to 0 to get the optimal vision. If you find the
display is not showing properly, please check your
cable connection or it is out transmission limit.
What is the minimum
requirement of Cat-X
cable
Minimum cable requirement is Category 5 cable for
HDSpider™ series products. Please ensure all cables
are terminated with RJ-45 plug according to
EIA/TIA568B definition.
What kind of Cat-X
cable is
recommended?
We recommend using Category 6 or 7 STP cable for
best picture quality at maximum extension. For better
result please use cable with minimum delay skew.
I want extension
Yes. To extend HDMI signal above specification
above specification, is published please use high quality HDMI cable (24
that possible?
gauges) and recommended Cat-X cable. On field
test, it is possible using CAT.6 cable for 50m
transmission under 1080p. If further extension is
required, please set HDMI source at 480p resolution.
I am using HVE-9900 to
receive HDMI signal,
but there is no image
on monitor.
HVE-9900 is only intended to use for shorter
transmission length. The maximum transmission length
is at 15m under 1080p or 25m under 720p/1080i
resolution. If your application exceeds this transmission
limit, please use HDSpider™ Long Range Cat.5 HDMI
Receiver (HVE-9000) instead.
There is no image on
display, what could
be the problem?
First please check all cable is properly installed.
Secondly check display source is functioning correctly.
It is still not working.
If problem persist, please try the EDID learning function
on HVE-9001, HVE-9002, or HVE-9004.
21
SPECIFICATIONS
Model Name
Technical
Role of usage
HVE-9001
HVE-9004
HVE-9008
Extender
1x4 splitter
1x9 splitter
Transmitter [TX]
HDMI compliance
HDMI 1.3c
HDCP compliance
Yes
Video bandwidth
Single-link 225MHz [6.75Gbps]
Video support
480i / 480p / 720p / 1080i / 1080p60 up to 36-bit color depth
HDMI over UTP cable
transmission (24-bit)
Full HD (1080p) — 40m (130ft) [CAT5e] / 50m (165ft) [CAT6]
HD (720p/1080i) — 50m (165ft) [CAT5e] / 60m (200ft) [CAT6]
Audio support
Surround sound (up to 7.1ch) or stereo digital audio
Signal equalization
None
Input TMDS signal
1.2 Volts [peak-to-peak]
Input DDC signal
5 Volts [peak-to-peak, TTL]
ESD protection
[1] Human body — ±19kV [air-gap discharge] & ±12kV [contact discharge]
[2] Core chipset — ±8kV
Input
1x HDMI
1x HDMI
Output
1x RJ-45
4x RJ-45
1x HDMI
1x HDMI
8x RJ-45
HDMI connector
Type A [19-pin female]
RJ-45 connector
WE/SS 8P8C
DIP switch
None
2-pin
None
Rotary control switch
Mode
None
Mode
Mechanical
Housing
Dimensions
[L x W x H]
Weight
Metal enclosure
Model
Package
93 x 60 x 25mm
[3.7” x 2.4” x 1”]
175 x 270 x 80mm
[6.9” x 10.6” x 3.1”]
215 x 85 x 40mm
[8.5” x 3.3” x 1.6”]
330 x 200 x 95mm
[1’1” x 7.9” x 3.7”]
438 x 158 x 44mm
[1’5” x 6.2” x 1.7”]
545 x 230 x 110mm
[1’10” x 9.1” x 4.3”]
Model
154g [5oz]
525 [1.2 lbs]
1.4kg [3.1 lbs]
Package
455g [1 lb]
985 [2.2 lbs]
2.2kg [4.8 lbs]
Fixedness
Power supply
Power consumption
Wall-mounting
1RU rack-mounting
5V 2A DC
5V 4A DC
1 Watts [max]
10 Watts [max]
Operation temperature
0~40°C [32~104°F]
Storage temperature
Relative humidity
Package Contents
-20~60°C [-4~140°F]
20~90% RH [no condensation]
1x HVE-9001 / HVE-9004/ HVE-9008
1x 5V power supply unit
1x User manual
22
13 Watts [max]
Model Name
HVE-9002
HVE-9003
Technical
Role of usage
1x2 distribution amplifier (splitter)
Transmitter [TX]
Transceiver [TRX]
HDMI compliance
HDMI 1.3c
HDCP compliance
Yes
Video bandwidth
Single-link 225MHz [6.75Gbps]
Video support
480i / 480p / 720p / 1080i / 1080p60 up to 36-bit color depth
HDMI over UTP cable
transmission (24-bit)
Full HD (1080p) — 40m (130ft) [CAT5e] / 50m (165ft) [CAT6]
HD (720p/1080i) — 50m (165ft) [CAT5e] / 60m (200ft) [CAT6]
Audio support
Signal equalization
Surround sound (up to 7.1ch) or stereo digital audio
None
8-level digital rotary control
Input TMDS signal
1.2 Volts [peak-to-peak]
Input DDC signal
5 Volts [peak-to-peak, TTL]
ESD protection
Input
Output
[1] Human body — ±19kV [air-gap discharge] & ±12kV [contact discharge]
[2] Core chipset — ±8kV
1x HDMI
1x RJ-45
1x HDMI
1x RJ-45
1x 3.5mm audio socket
1x HDMI
1x RJ-45
1x 3.5mm audio socket
HDMI connector
Type A [19-pin female]
RJ-45 connector
WE/SS 8P8C with 2 LED indicators
3.5mm connector
DIP switch
Rotary control switch
Earphone jack for stereo audio
2-pin DIP
None
None
8-level signal equalization
Mechanical
Housing
Metal enclosure
Dimensions Model
[L x W x H] Package
108 x 210 x 27mm [4.3” x 8.3” x 1.1”]
Weight
200 x 330 x 95mm [7.9” x 1’1” x 3.7”]
Model
525g [1.2 lbs]
530g [1.2 lbs]
Package
980g [2.2 lbs]
985g [2.2 lbs]
Fixedness
Wall-mounting
Power supply
5V 4A DC
Power consumption
3 Watts [max]
Operation temperature
0~40°C [32~104°F]
Storage temperature
Relative humidity
-20~60°C [-4~140°F]
20~90% RH [no condensation]
1x HVE-9002 or HVE-9003
1x 5V power supply unit
1x User manual
Package Contents
23
Model Name
HVE-9000
HVE-9900
Long range receiver [RX]
Short range receiver [RX]
Technical
Role of usage
HDMI compliance
HDMI 1.3c
HDCP compliance
Yes
Video bandwidth
Single-link 225MHz [6.75Gbps]
Video support
Full HD
[1080p]
HD
[720p/1080i]
HDMI over
UTP cable
transmission
(24-bit)
Audio support
480i / 480p / 720p / 1080i / 1080p60 up to 36-bit color depth
40m [130ft] for CAT5e
15m [50ft] for CAT5e
50m [165ft] for CAT6
18m [65ft] for CAT6
50m [165ft] for CAT5e
25m [80ft] for CAT5e
60m [200ft] for CAT6
30m [100ft] for CAT6
Surround sound (up to 7.1ch) or stereo digital audio
Equalization
8-level digital rotary control
Input TMDS signal
Input DDC signal
ESD protection
Input
Output
HDMI connector
RJ-45 connector
Rotary control switch
None
1.2 Volts [peak-to-peak]
5 Volts [peak-to-peak, TTL]
[1] Human body — ±19kV [air-gap discharge] & ±12kV [contact
discharge]
[2] Core chipset — ±8kV
1x RJ-45
1x RJ-45
1x HDMI
1x HDMI
Type A [19-pin female]
Type A [19-pin male]
WE/SS 8P8C with 2 LED indicators
8-level signal equalization
None
Metal enclosure
Plastic molding
93 x 60 x 25mm
[3.7” x 2.4” x 1”]
45 x 25 x 20mm
[1.8”x1”x0.8”]
175 x 270 x 80mm
[6.9” x 10.6” x 3.1”]
115 x 170 x 40mm
[4.5”x 6.7”x1.6”]
Model
154g [5oz]
22g [0.8oz]
Package
455g [1 lb]
90g [3.2oz]
Wall-mounting
Direct plug-in
5V 2A DC
None
1 Watt [max]
0.5 Watt [max]
Mechanical
Housing
Dimensions
[L x W x H]
Weight
Model
Package
Fixedness
Power supply
Power consumption
Operation temperature
0~40°C [32~104°F]
Storage temperature
Relative humidity
Package Contents
-20~60°C [-4~140°F]
20~90% RH [no condensation]
1x HVE-9000
1x 5V power supply unit
1x User manual
24
1x HVE-9900
1x User manual
NOTICE
1. Please read user manual carefully before operating the device.
2. Please use the power supply unit accompanied with this product. Warranty does not cover
for damages caused by pairing other power adaptor.
3. Please check all connecting devices are properly grounded to avoid electric failure.
4. This product has limited warranty for one year from defects in material and workmanship.
Items that are physically damaged, misused, tempered with or altered are void of warranty.
For further details please contact your distributor. In case warranty sticker is damaged or
missing, warranty is void. For further details please contact your distributor.
5. All of the transmission distances are measured by using Belden Cat.5e 125MHz solid UTP
cables and ASTRODESIGN Video Signal Generator VG-859C as the HDMI source.
6. When adjusting the signal level on the receiver unit, dial the rotary control switch from 7 to 0
and stop turning the rotary switch whenever the audio/video is playing normally.
Inappropriate signal level setting may cause overpowering issues that would shorten the
product’s life significantly!
7. The transmission length is largely affected by the type of Cat.5/5e/6 cables, the type of
HDMI sources, and the type of HDMI display. The testing result shows solid UTP cables
(usually in the form of 300m or 1,000ft bulk cables) can transmit a lot longer signals than
stranded UTP cables (usually in the form of fixed length patch cords). Shielded STP cables
are better suited than unshielded UTP cables. A solid UTP CAT5e cable shows longer
transmission range than stranded STP CAT6 cable. For long extension applications, solid
UTP/STP cables are the only viable choice.
8. EIA/TIA-568-B termination (T568B) is preferred for better performance.
9. To reduce the interference among the unshielded twisted pairs of wires in category cable,
use double shielded STP cables to improve EMI problems, which is worse in long
transmission.
10. Because the quality of the category cables has the major effects on how long the
transmission limit can achieve and how good is the received picture quality, the actual
transmission range is subject to one’s choice of Cat.5e/6 cables. For desired resolutions
greater than 1080i or 1280x1024, a solid STP Cat.6 cable is recommended.
11. If your HDMI display has multiple HDMI inputs, the first HDMI input [HDMI input #1] generally
can produce better transmission performance among all HDMI inputs.
12. If the HDMI or DVI device requires EDID information, use an EDID Reader/Writer to retrieve
and provide the EDID information of the DVI or HDMI display.
Performance Guide for HDMI over Category Cable Transmission
Performance rating
Wiring
Shielding
Unshielded (UTP)
Solid
Shielded (STP)
Unshielded (UTP)
Stranded
Shielded (STP)
Termination
Type of category cable
CAT5
CAT5e
CAT6












Use EIA/TIA-568-B termination (T568B) at any time
25
PIN DEFINITION
HDMI
Pin 1
TMDS Data2+
Pin 8
TMDS Data0 Shield
Pin 15 SCL
Pin 2
TMDS Data2 Shield
Pin 9
TMDS Data0–
Pin 16 SDA
Pin 3
TMDS Data2–
Pin 10
TMDS Clock+
Pin 17 DDC/CEC Ground
Pin 4
TMDS Data1+
Pin 11
TMDS Clock Shield
Pin 18 +5 V Power
Pin 5
TMDS Data1 Shield
Pin 12
TMDS Clock–
Pin 19 Hot Plug Detect
Pin 6
TMDS Data1–
Pin 13
CEC
Pin 7
TMDS Data0+
Pin 14
Reserved (N.C. on device)
CAT5 [RJ-45]
Pair of Cat-5/5e/6 Cable
White/orange stripe
Orange solid
White/green stripe
Blue solid
White/blue stripe
Green solid
White/brown stripe
Brown solid
26
Definition
TX0–
TX0+
TX1–
TX2–
TX2+
TX1+
TXC–
TXC+
27