BOTHHAND “LAN-MATE” SERIES DESCRIPTION : 1000 BASE-T RJ45 1 x 1 INTEGRATED USA MAGNETICS CONNECTOR P/N: KLA1T109-43 LF Feature l l l l l l l l l l l RJ-45 needs to be matched FCC standard. Complies with requirement of IEEE 802.3ab standards. RJ-45 connector integrated with transformer/impedance resistor/high voltage capacitor. Size same as RJ-45 connector to save PCB board space. Reduced EMI radiation to improve EMI performance. Design for 1000 BASE transmission over UTP-5 cable. Isolation @ 60Hz : Input to output:1500Vrms. Compliance with ROHS requirements. Operating temperature range: 0℃ to +70℃. Storage temperature range: -25℃ to +85℃. Recommended panel Part Number Standard LED Forward*V(Max) 3 YELLOW 2.6V 4 GREEN 2.6V (TYP) 2.1V 2.2V *with a forward current of 20mA Electrical Specifications @ 25°C Part Turns Ratio OCL(uH Min) Cross talk (±5%) @100KHz/0.1V (dB Min) Number KLA1T109-43 LF HI-POT (Vrms) TX RX with 8mA DC Bias 0.3-30MHz 30-60MHz 60-100MHz 1CT:1CT 1CT:1CT 350 -40 -35 -30 1500 Continue Part Number KLA1T109-43 LF Insertion Loss Return Loss CMR (dB Max) (dB Min) @ Load 100Ω (dB Min) 1-100MHz 1-30MHz -1.0 -16 30-40MHz 40-50MHz 50-80MHz -13.5 -11.5 -10 1-30MHz 30-60MHz 60-125MHz -30 -25 -20 Schematic www.bothhandusa.com Page :1/2 [email protected] A1(12/05) “LAN-MATE” SERIES DESCRIPTION : 1000 BASE-T RJ45 1 x 1 INTEGRATED MAGNETICS CONNECTOR BOTHHAND USA P/N: KLA1T109-43 LF Mechanical 1. Plastic Material : Thermoplastic (UL 94V-0), Black Housing 2. Metal Shield : Brass, 20u" inches thick Nickel 3. Spring Wire : Phosphor bronze with selective gold plating 4. Solder Pin : 0.5x0.35mm, SUS430 with solder Plated 5. Durability : 750 Mating cycles Min. PCB Layout Mounting Hole(Top View) www.bothhandusa.com Page :2/2 [email protected] A1(12/05)