AWB7224 728 - 768 MHz Small-Cell Power Amplifier Module PRELIMINARY DATA SHEET - Rev 1.1 FEATURES • InGaP HBT Technology • -47 dBc ACPR @ 610 MHz, +27 dBm • 29 dB Gain • High Efficiency • Low Transistor Junction Temperature • Matched for a 50 Ω System • Low Profile Miniature Surface Mount Package; RoHS Compliant • Multi-Carrier Capability APPLICATIONS • LTE, WCDMA, and HSDPA Air Interfaces 14 Pin 7 mm x 7 mm x 1.3 mm Surface Mount Module • Picocell, Femtocell, Home Nodes • Customer Premises Equipment (CPE) PRODUCT DESCRIPTION The AWB7224 is a fully matched, Multi-Chip-Module (MCM) designed for picocell, femtocell, and customer premises equipment (CPE) applications. Consisting of two parallel path high linearity, high efficiency power amplifiers, the device meets the extremely demanding needs of small cell infrastructure architectures. Designed for LTE, WCDMA and HSDPA air interfaces operating in the 728 MHz to 768 MHz bands, the AWB7224 delivers up to +27 dBm of LTE (E-TM1.1) Vcc1 RF1 Input power through an external 90-degree hybrid coupler, with an ACPR of -47 dBc. The device operates from a convenient +4.5 V supply and provides 29 dB of RF gain. The AWB7224 is manufactured using an advanced InGaP HBT MMIC technology offering state-of-the-art reliability, temperature stability, and ruggedness. Its 7 mm x 7 mm x 1.3 mm surface mount package incorporates RF matching networks optimized for output power, efficiency, and linearity in a 50 V system. Vcc2 Matching Network RF Input Source Matching Network 90 Hybrid Coupler Combined RF Output Power Detector Bias Network o o 90 Hybrid Coupler (external ) RF2 Input RF1 Output (external ) Matching Network Matching Network Bias Network Power Detector Vref Detector Output Figure 1: Block Diagram 09/2014 RF2 Output AWB7224 VREF 1 14 GND GND 2 13 GND RF2IN 3 12 RF2OUT VCC1 4 11 VCC2 RF1IN 5 10 RF1OUT N/C 6 9 GND DETOUT 7 8 GND GND Figure 2: Pinout (X-ray Top View) Table 1: Pin Description 2 PIN NAME 1 VREF Reference Voltage 2 GND Ground 3 RF2IN RF2 Input 4 VCC1 Supply Voltage 5 RF1IN RF1 Input 6 N/C No Connection 7 DETOUT Detector Output 8 GND Ground 9 GND Ground 10 RF1OUT 11 VCC2 12 RF2OUT 13 GND Ground 14 GND Ground DESCRIPTION RF1 Output Supply Voltage RF2 Output PRELIMINARY DATA SHEET - Rev 1.1 09/2014 AWB7224 ELECTRICAL CHARACTERISTICS Table 2: Absolute Minimum and Maximum Ratings PARAMETER MIN MAX UNIT Supply Voltage (VCC) 0 +5 V Reference Voltage (VREF) 0 +3.5 V RF Output Power (POUT) (1) - +30 dBm ESD Rating Human Body Model (2) Charged Device Model (3) Class 1C Class IV - MSL Rating (4) 4 - Junction Temperature (Tj) - +150 °C -40 +150 °C Storage Temperature (TSTG) Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Notes: (1) At output of external 90° hybrid coupler. (2) JEDEC JS-001-2010. (3) JEDEC JESD22-C101D. (4) 260 °C peak reflow. Table 3: Operating Ranges PARAMETER MIN TYP MAX UNIT Operating Frequency (f) 728 - 768 MHz Supply Voltage (VCC) +3.6 +4.5 +4.65 V Reference Voltage (VREF) +2.75 0 +2.85 - +2.95 +0.5 V RF Output Power (POUT) - +27 - dBm Case Temperature (TC) -40 - +85 °C COMMENTS PA "on" PA "shut down" Using external 90hybrid couplers The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. 3 PRELIMINARY DATA SHEET - Rev 1.1 09/2014 AWB7224 Table 4: Electrical Specifications (TC = +25 °C, VCC = +4.5 V, VREF = +2.85 V, 50 Ω system) PARAMETER MIN TYP MAX UNIT Gain (2) - 29 - dB ACPR (1), (2), (3) @ 10 MHz @ 20 MHz - -47 -57 - dBc - 13 - % Thermal Resistance - 17 - C/W Quiescent Current (Icq) - 265 - mA Reference Current - 10 - mA through VREF pin Leakage Current - 3 10 µA VCC = +5 V, V REF = 0 V Harmonics 2fo 3fo, 4fo - -50 -60 - dBc - 20 - dB - 20 - dB - +35.5 - dBm CW tone Power-Added Efficiency (1), (2), (3) 728 - 768 MHz Junction to Case (2) Input Return Loss (2) Output Return Loss (2) P1dB Spurious Output Level (all spurious outputs) (2) Load mismatch stress with no permanent degradation or failure (2) - - -60 dBc POUT ≤ +27 dBm In-band load VSWR < 5:1 Out-of-band load VSWR < 10:1 Applies over all voltage and temperature operating ranges 8:1 - - VSWR VCC = +4.5 V, POUT = + 27 dBm Applies over full operating temperature range Notes: (1) ACPR and Efficiency measured at 748 MHz. (2) POUT = +27 dBm, using specified external 908 hybrid couplers. (3) LTE E-TM1.1 (10 MHz). 4 COMMENTS PRELIMINARY DATA SHEET - Rev 1.1 09/2014 AWB7224 APPLICATION INFORMATION To ensure proper performance, refer to all related Application Notes on the ANADIGICS web site: http://www.anadigics.com Shutdown Mode The power amplifier may be placed in a shutdown mode by applying logic low levels (see Operating Ranges table) to the VREF voltage. VCC1 VCC2 TVS Diode 100uF 10uF 0.1uF 1000pF VREF 0.1uF 5 RF Input 4 3 90o Hybrid Coupler 100KΩ 14 GND 2 13 GND 12 RF2OUT 2 11 VCC2 1 10 RF1OUT 6 9 GND 8 GND RF2IN 3 1 VCC1 4 2 RF1IN 4.7KΩ 0.1uF 1 6 50Ω DETOUT 1000pF VREF AWB7224 5 N/C 6 DETOUT 7 GND at slug 10uF 100uF 100uF GND 50Ω 3 90o Hybrid Coupler 4 5 RF Output Notes: 1. Recommended 90o hybrid couplers are muRata LDJ2H825M03FA062A. 2. Applications that have large supply voltage transients may benefit from the use of TVS diodes. For such applications, recommended TVS diodes are SM05T1G or SMJ5.0A. Figure 3: Application Circuit Schematic 5 0.1uF TVS Diode PRELIMINARY DATA SHEET - Rev 1.1 09/2014 AWB7224 Figure 4: PCB Footprint 6 PRELIMINARY DATA SHEET - Rev 1.1 09/2014 AWB7224 PACKAGE OUTLINE Figure 5: Package Outline - 14 Pin 7 mm x 7 mm x 1.3 mm Surface Mount Module ANADIGICS logo Pin 1 Identifier Part Number Date Code YY= Year WW= Work Week Marking Code B7224 Figure 6: Branding Specification 7 PRELIMINARY DATA SHEET - Rev 1.1 09/2014 Lot Number Country Code AWB7224 COMPONENT PACKAGING PIN 1 Figure 7: Tape & Reel Packaging Table 5: Tape & Reel Dimensions 8 PACKAGE TYPE TAPE WIDTH POCKET PITCH REEL CAPACITY MAX REEL DIA 7 mm x 7 mm x 1.3 mm 16 mm 12 mm 2500 13" PRELIMINARY DATA SHEET - Rev 1.1 09/2014 AWB7224 ORDERING INFORMATION ORDER NUMBER TEMPERATURE RANGE PACKAGE DESCRIPTION COMPONENT PACKAGING AWB7224P8 -40 oC to +85 oC RoHS-compliant 14 Pin 7 mm x 7 mm x 1.3 mm Surface Mount Module Tape and Reel, 2500 pieces per Reel ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 9 PRELIMINARY DATA SHEET - Rev 1.1 09/2014