Model VCP1033A Jitter attenuator Features: • 155.52 MHz SAW-based PECL output • Low Profile Surface Mount Package • Excellent solder reflow performance • PCB Substrate for excellent TCE match . VCP1033A 155M CTS 03XX Description & Applications: Surface mount 15.8 mm SQ frequency translator operating at a 3.3V supply with complementary PECL outputs for use in telecom & datacom applications Electrical Specifications: VCP1033A Specification Input frequency 155.52 MHz Output frequency 155.52 MHz Supply Voltage (± 5%) 3.3V PECL input 550 mV min. peak-to-peak PECL output Logic “0” Logic “1” Current Drain 95 mA max. Operating Temperature -40 to 85°C Input frequency tracking capability +/- 32 ppm minimum Jitter attenuation RMS phase jitter generation (12 kHz to 50 MHz) < 1 psec max. Min. 1.49V 2.28V Max. 1.68V 2.42V 3 dB @ 100 Hz offset 30 dB @ 1 kHz offset CTS Wireless Components, Inc. 171 Covington Dr. Bloomingdale, Illinois 60108 Tel. (800) 757-6686 Fax: (630) 295-6606 www.ctscorp.com Rev. 1.5 VCP1033A Mechanical Dimensions (mm): 15.8mm x 15.8mm x 2.8 mm (max.): Enable: Vcc Disable: GND CTS Wireless Components, Inc. 171 Covington Dr. Bloomingdale, Illinois 60108 Tel. (800) 757-6686 Fax: (630) 295-6606 www.ctscorp.com Rev. 1.5 VCP1033A Recommended pad layout: CTS Wireless Components, Inc. 171 Covington Dr. Bloomingdale, Illinois 60108 Tel. (800) 757-6686 Fax: (630) 295-6606 www.ctscorp.com Rev. 1.5 VCP1033A PIN OUT Pin Symbol Function 1 LD Lock detect Logic “0” indicates a locked condition Logic “1” indicates that no input signal is present or the input signal has moved out of the lock range 2 IN Input frequency 3 /IN Complementary input (not required) 4 GND Ground 5 E/D Enable/ disable Logic “0” = output disabled Logic “1” = output enabled 6 /OUT Complementary output 7 OUT Output 8 Vcc Power supply voltage 9 N/C No connection 10 GND Ground CTS Wireless Components, Inc. 171 Covington Dr. Bloomingdale, Illinois 60108 Tel. (800) 757-6686 Fax: (630) 295-6606 www.ctscorp.com Rev. 1.5 VCP1033A Tape & Reel Information Tape width 24 mm, pitch 20 mm, as per EIA 481-2, 1000 units per reel max Environmental Limits: Storage Temperature Humidity Vibration -40 to +90 °C. 95% Relative humidity max @ 70°C. 10 to 60 Hz with double amplitude of 1.52mm max. (1/2 hour in each of 3 perpendicular planes). CTS Wireless Components, Inc. 171 Covington Dr. Bloomingdale, Illinois 60108 Tel. (800) 757-6686 Fax: (630) 295-6606 www.ctscorp.com Rev. 1.5