Model 625 HCMOS Clock Oscillator FEATURES • • • • • • • • • • Standard 2.5mm x 2.0mm 4-Pad Surface Mount Package HCMOS Output Fundamental and 3rd Overtone Crystal Designs Frequency Range 1 – 110 MHz Frequency Stability ±50 ppm Standard, ±25 ppm and ±20 ppm Available Operating Voltages +1.8Vdc, +2.5Vdc or +3.3Vdc Operating Temperature to -40°C to +85°C Output Enable Standard Tape & Reel Packaging Standard, EIA-418 RoHS/Green Compliant [6/6] APPLICATIONS Model 625 is ideal for applications; such as broadband access, Ethernet/Gigabit Ethernet, microprocessors/DSP/FPGA, networking equipment computers and peripherals, digital video, cameras and other portable devices. ORDERING INFORMATION 625 M SUPPLY VOLTAGE FREQUENCY IN MHz M = +1.8Vdc N = +2.5Vdc L = +3.3Vdc M - indicates MHz and decimal point. 2 OPERATING TEMPERATURE RANGE FREQUENCY STABILITY A = -10°C to +60°C C = -20°C to +70°C [standard] I = -40°C to +85°C 6 = ± 20 ppm 1 5 = ± 25 ppm 3 = ± 50 ppm [standard] 1] Consult factory for 6I Stability/Temperature availability. 2] Frequency is recorded with three leading significant digits before the ‘M’ and 5 significant digits after the ‘M’ (including zeros). [Ex. 3.579545 MHz, code as 003M57954; 14.31818 MHz, code as 014M31818; 125 MHz, code as 125M00000] Not all performance combinations and frequencies may be available. Contact your local CTS Representative or CTS Customer Service for availability. PACKAGING INFORMATION [reference] Device quantity is 1k pcs. minimum and 3k pcs. maximum per 180mm reel. 8mm tape width. Document No. 008-0329-0 Page 1- 3 www.ctscorp.com Rev. C Model 625 2.5mm x 2.0mm Low Cost HCMOS Clock Oscillator ELECTRICAL CHARACTERISTICS PARAMETER Maximum Supply Voltage Storage Temperature Frequency Range Frequency Stability [See Note 1 and Ordering Information] Aging Operating Temperature Commercial Industrial Supply Voltage Model 625M Model 625N Model 625L Supply Current Model 625M ELECTRICAL PARAMETERS [+1.8V] Model 625N SYMBOL VCC TSTG fO CONDITIONS - MIN -0.5 -40 1.0 TYP - MAX 4.0 +100 110 UNIT V °C MHz Δf/fO - - - 20, 25, 50 ± ppm - - 3 ± ppm -10 -20 -40 +25 +60 +70 +85 1.62 2.25 2.97 1.8 2.5 3.3 1.98 2.75 3.63 - - 7 15 10 15 15 20 15 90%VCC - - 10%VCC 45 - -2, -4, -8 +2, +4, +8 55 - 2 5 4 4 3 3 2 5 0.7*VCC - 0.3*VCC Δf/fO TA ±10% ICC CL = 15pF 1.0 MHz to 50 MHz 50.1 MHz to 110 MHz 1.0 MHz to 50 MHz 50.1 MHz to 110 MHz 1.0 MHz to 50 MHz 50.1 MHz to 110 MHz Model 625L [+3.3V] [+1.8V] Model 625N CL VOH VOL CMOS Load CMOS Load IOH IOL SYM VOH = 90%VCC (1.8V, 2.5, 3.3V) VOL = 10%VCC (1.8V, 2.5, 3.3V) @ 50% Level @ 10% - 90% Levels, CL = 15pF 1.0 MHz to 20 MHz 20.1 MHz to 110 MHz 1.0 MHz to 20 MHz 20.1 MHz to 110 MHz 1.0 MHz to 20 MHz 20.1 MHz to 110 MHz Application of VCC TR, TF [+2.5V] Model 625L [+3.3V] Start Up Time Enable Function Enable Input Voltage Disable Input Voltage - VCC [+2.5V] Output Load Output Voltage Levels Logic '1' Level Logic '0' Level Output Current Logic '1' Level [M,N,L] Logic '0' Level [M,N,L] Output Duty Cycle Rise and Fall Time Model 625M @+25°C, 1st year TS VIH VIL TPLZ IST pjpk-pk pjrms tjrms Pin Pin Pin Pin 1 1 1 1 Logic Logic Logic Logic '1', Output Enabled '0', Output Disabled '1' '0', Output Disabled - - Enable Time [M,N,L] Standby Current Period Jitter, pk-pk Period Jitter, RMS Phase Jitter, RMS Bandwidth 12 kHz - 20 MHz Notes: 1. Inclusive of initial tolerance at time of shipment, changes in supply voltage, load, temperature and aging. LVCMOS OUTPUT WAVEFORM TEST CIRCUIT, CMOS LOAD 5 15 40 25 1 Page 2 - 3 V mA pF V mA % ns ms V ms µA ps ENABLE TRUTH TABLE PIN 1 Logic ‘1’ Open Logic ‘0’ Document No. 008-0329-0 °C PIN 3 Output Output High Imp. Rev. C Model 625 2.5mm x 2.0mm Low Cost HCMOS Clock Oscillator MECHANICAL SPECIFICATIONS MARKING INFORMATION 1. XX.XX – Frequency in MHz. 2. C – CTS and Pin 1 identifier. 3. ** - Manufacturing Site Code. 4. D – Manufacturing Date Code. [See Table 1 for codes.] 5. Complete CTS part number, frequency value and date code information must appear on reel and carton labels. PACKAGE DRAWING XX.XX C**D NOTES 1. Termination pads [e4]. Barrier-plating is nickel [Ni] with gold [Au] flash plate. 2. Reflow conditions per JEDEC J-STD-020; 260°C maximum, 20 seconds. 3. MSL = 1. TABLE I MONTH YEAR JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC M 2001 2005 2009 2013 2017 A B C D E F G H J K L 2002 2006 2010 2014 2018 N P Q R S T U V W X Y Z 2003 2007 2011 2015 2019 a b c d e f g h j k l m 2004 2008 2012 2016 2020 n p q r s t u v w x y z SUGGESTED SOLDER PAD GEOMETRY CBYPASS should be ≥ 0.01 uF. D.U.T. PIN ASSIGNMENTS PIN SYMBOL 1 Document No. 008-0329-0 Page 3 - 3 DESCRIPTION EOH Enable 2 GND Circuit & Package Ground 3 Output 4 VCC RF Output Supply Voltage Rev. C