TACmicrochip Capacitance and Voltage Matrix Cap µF 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 Code 474 684 105 155 225 335 475 685 106 156 226 336 476 Standard Rated Voltage at 85°C 3 4 6.3 10 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0805 0603 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 2 Extended Range POLARITY BAND Positive Termination + L H New Technology Increases Volumetric Efficiency 9 30 8 25 7 6 µF/mm3 20 Value Added 15 10 Conventional Technology TACmicrochip Technology 0 D C B A Case Size 0805 0603 Conventional molded tantalum technology results in an increase in ESR for each reduction in case size. The graph above shows a reduction in ESR performance of the TACmicrochip compared to the same case size if conventional technology were used. Enhanced ESR & High Frequency Operation TACmicrochip Average 5 Value Added 4 3 2 1 Molded Average 0 87 88 89 90 91 92 93 94 Year 95 96 97 98 The above graph shows a major leap forward in µF/mm3 performance. The CV values offered in the 0603 could not be achieved using conventional molded technology. Enhanced Leakage Current & Battery Efficiency 70 10 TACL155M006 TACL155M006 60 50 DCL, nA ESR, Ohms RESIN ENCAPSULATION Development New Technology Reduces ESR Average ESR (Ohms) W 35 5 SOLDERABLE TERMINATION H 1.0 40 30 20 10 0.1 100 0 1k 10k 100k 1M Frequency, Hz 10M 100M The new construction technique used to manufacture the TACmicrochip eliminates many of the parasitic inductance and resistance paths inherent in standard molded tantalum capacitors. 0 1 2 3 Voltage, V 4 5 6 Overall leakage current capability improvements are achieved using the unique TACmicrochip construction technology. TACmicrochip How to Order: TAC L 225 M 003 R ** Type TACmicrochip Case Code L =0603, R=0805 Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Capacitance Tolerance K=±10%, M=±20% Rated DC Voltage Packaging Termination Finish Preferred R=8mm x 180mm Tape & Reel Tin Plated X=8mm x 110mm Tape & Reel Tin Plated Special A=8mm x 180mm Tape & Reel Gold Plated F=8mm x 110mm Tape & Reel Gold Plated Additional characters may be added for special requirements Ratings and Part Number Reference AVX Style Case Size Capacitance µF@120Hz TAC TAC TAC 0603 0603 0603 3.3 4.7 6.8 TAC TAC TAC 0603 0603 0603 2.2 3.3 4.7 TAC TAC TAC 0603 0603 0603 1.5 2.2 3.3 TAC TAC TAC 0603 0603 0603 1.0 1.5 2.2 TAC TAC TAC TAC 0603 0603 0603 0603 0.47 0.68 1.0 1.5 Ratings and Part Number Reference Leakage µA (Max) DF % Max ESR Max @100kHz AVX Style Case Size Capacitance µF@120Hz 0.5 0.5 0.5 6 6 6 10 10 10 TAC TAC TAC 0805 0805 0805 22 33 47 0.5 0.5 0.5 6 6 6 10 10 10 TAC TAC TAC 0805 0805 0805 15 22 33 0.5 0.5 0.5 6 6 6 10 10 10 TAC TAC TAC 0805 0805 0805 10 15 22 0.5 0.5 0.5 6 6 6 10 10 10 TAC TAC TAC 0805 0805 0805 6.8 10 15 0.5 0.5 0.5 0.5 6 6 6 6 12 10 10 10 TAC TAC TAC 0805 0805 0805 4.7 6.8 10 ESR Max @100kHz 0.5 0.7 1.0 8 8 8 6 6 6 0.5 0.7 1.0 8 8 8 6 6 6 0.5 0.6 0.9 8 8 8 6 6 6 0.5 0.6 0.9 8 8 8 6 6 6 0.5 0.7 1.0 8 8 8 6 6 6 (3 volt) (3 volt) (4 volt) (4 volt) (6.3 volt) (6.3 volt) (10 volt) (10 volt) L S DF % Max (2 volt) (2 volt) Lt Leakage µA (Max) Recommended Pad Size PSL Lt PL H PS PL PW Polarity Bar Identifies Positive Termination W Unit: mm (inches) Case Size L + 0.25(.010) S (min) W + 0.20(.008) H + 0.20(.008) - 0.15(.006) - 0.10(.004) - 0.10(.004) 0603 1.6 (.063) 0.8 (.030) 0.85 (.030) 0.85 (.030) 0805 2.0 (.080) 1.1 (.040) 1.35 (.050) 1.35 (.050) Unit: mm (inches) Case Size 0603 0805 PL 0.9 (.035) 1.0 (.040) PS (min) 0.7 (.028) 1.0 (.040) PW 1.0 (.040) 1.5 (.060) PSL 2.5 (.100) 3.0 (.120)