OxiCap® NOM Low ESR Multianodes Niobium Oxide Capacitor FEATURES • Multi-anode construction • Super low ESR • Non-burn safe technology • CV range: 220-680μF / 1.8-6.3V • IBM global approval received in 2004 • Elektra award received in 2005 LEAD-FREE COMPATIBLE COMPONENT Elektra Award 2005 APPLICATIONS • High power low voltage industrial power supplies L NOM MULTIANODE CONSTRUCTION W H A S A W1 CASE DIMENSIONS: millimeters (inches) MARKING E CASE OxiCap® LOGO Polarity Band (Anode+) Capacitance Value in pF 227 = 220μF 227 G XXXXX Case Size See table above EIA Code E 2917 EIA Metric L±0.20 (0.008) 7343-43 7.30 (0.287) W+0.20 (0.008) H+0.20 (0.008) –0.10 (0.004) –0.10 (0.004) 4.30 (0.169) 4.10 (0.162) W1 ±0.20 (0.008) A+0.30 (0.012) –0.20 (0.008) S Min. 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) W1 dimension applies to the termination width for A dimensional area only. Rated Voltage G = 4V ID Code HOW TO ORDER NOM E Type Code 227 M 006 Capacitance Code 1st two digits represent significant figures, 3rd digit represents multiplier in pF Tolerance M=±20% Rated DC Voltage 001 = 1.8Vdc 002 = 2.5Vdc 004 = 4Vdc 006 = 6.3Vdc R Packaging R = Pure Tin 7" Reel S = Pure Tin 13" Reel 0040 ESR in mΩ TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Rated Voltage DC (VR) Category Voltage (VC) Surge Voltage (VS) Surge Voltage (VS) Temperature Range: Reliability: 170 ■ APRIL 2014 +85°C: +125°C: +85°C: +125°C: All technical data relate to an ambient temperature of +25°C is not stated 220 μF to 680 μF ±20% 0.02CV 1.8 2.5 4 6.3 0.9 1.3 2 3 2.3 3.3 5.2 8 1.2 1.7 2.6 4 -55°C to +125°C 0.2% per 1000 hours at 85°C, VR, 0.1Ω/V series impedance, 60% confidence level Meets requirements of AEC-Q200 OxiCap® NOM Low ESR Multianodes Niobium Oxide Capacitor CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance μF Code 220 227 330 337 470 477 680 687 Rated Voltage DC (VR ) to 85°C / 0.66 DC to 105ºC / 0.5 DC to 125ºC 1.8V (x) 2.5V (e) 4.0V (G) 6.3V (J) E(40) E(35) E(23,35) E(30) E(23,30) E(23) E(23) LEAD-FREE COMPATIBLE COMPONENT Available Ratings, (ESR ratings in mOhms in brackets) Engineering samples - please contact manufacturer *Codes under development - subject to change Note: Voltage ratings are minimum values. AVX reserves the right to supply higher ratings in the same case size, to the same reliability standards. NON-BURN NON-SMOKE RATINGS & PART NUMBER REFERENCE AVX Part No. NOME687M001#0023 Case Capacitance Size (μF) Rated Voltage (V) Rated Category Category Temperature Voltage Temperature (ºC) (V) (ºC) E 680 1.8 85 NOME477M002#0030 NOME687M002#0023 E E 470 680 2.5 2.5 85 85 NOME337M004#0035 NOME477M004#0023 NOME477M004#0030 E E E 330 470 470 4 4 4 85 85 85 NOME227M006#0040 NOME337M006#0023 NOME337M006#0035 E E E 220 330 330 6.3 6.3 6.3 85 85 85 1.8 Volt @ 85°C 0.9 125 2.5 Volt @ 85°C 1.3 125 1.3 125 4 Volt @ 85°C 2 125 2 125 2 125 6.3 Volt @ 85°C 3 125 3 125 3 125 DCL (μA) Max. DF % Max. ESR Max. (mΩ) @ 100kHz MSL 100kHz RMS Current (A) 24.5 6 23 23.5 34 10 6 26.4 37.6 37.6 26.4 39.6 39.6 25ºC 85ºC 125ºC 3 3.753 3.378 1.501 30 23 3 3 3.286 3.753 2.958 3.378 1.315 1.501 8 6 6 35 23 30 3 3 3 3.043 3.753 3.286 2.738 3.378 2.958 1.217 1.501 1.315 12 6 6 40 23 35 3 3 3 2.846 3.753 3.043 2.561 3.378 2.738 1.138 1.501 1.217 Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 125 times catalog limit post mounting. For typical weight and composition see page 202. NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards. APRIL 2014 ■ 171 OxiCap® NOM Low ESR Multianodes Niobium Oxide Capacitor QUALIFICATION TABLE TEST Endurance Storage Life Humidity Biased Humidity Temperature Stability Surge Voltage NOM series (Temperature range -55ºC to +125ºC) Characteristics Visual examination no visible damage Determine after application of rated voltage for 2000 +48/-0 hours at 85±2ºC and then leaving 1-2 hours at DCL initial limit room temperature. Also determine of 125ºC temperaΔC/C within ±10% of initial ture, category voltage for 2000 +48/-0 hours and DF initial limit then leaving 1-2 hours at room temperature. Power supply impedance to be ≤0.1Ω/V. ESR 1.25 x initial limit Visual examination no visible damage DCL initial limit 125ºC, 0V, 2000h ΔC/C within ±10% of initial DF initial limit ESR 1.25 x initial limit Visual examination no visible damage Determine after storage without applied voltage DCL 1.5 x initial limit at 65±2ºC and 90-95% relative humidity for 500 ΔC/C within ±10% of initial hours and then recovery 1-2 hours at room temperature. DF 1.2 x initial limit ESR 1.25 x initial limit Visual examination no visible damage DCL 2 x initial limit Determine after leaving for 1000 hours at 85±2ºC, 85% relative humidity and rated voltage and then ΔC/C within ±10% of initial recovery 1-2 hours at room temperature. DF 1.2 x initial limit ESR 1.25 x initial limit Condition Step 1 2 3 4 5 6 Temperature°C +20±2 -55+0/-3 +20±2 +85+3/-0 +125+3/-0 +20±2 Duration(min) 15 15 15 15 15 15 Test temperature: 125ºC+3/0ºC Test voltage: Category voltage at 125ºC Surge voltage: 1.3 x category at 125ºC Series protection resistance 1000±100Ω Discharge resistance: 1000Ω Number of cycles: 1000x Cycle duration: 6 min; 30 sec charge, 5 min 30 sec discharge *Initial Limit 172 ■ APRIL 2014 value value value value DCL ΔC/C DF +20ºC -55ºC IL* n/a n/a +0/-10% IL* 1.5 x IL* +20ºC IL* ±5% IL* +85ºC +125ºC +20ºC 12 x IL* 15 x IL* IL* +10/-0% +12/-0% ±5% 1.5 x IL* 2 x IL* IL* ESR 1.25 x IL* 2.5 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* Visual examination no visible damage DCL initial limit ΔC/C within ±5% of initial value DF initial limit ESR 1.25 x initial limit