TMC Series Established Reliability TACmicrochip® • • • • • Weibull graded Reliability level: 0.1% / 1000 hrs. Low leakage CV range: 0.47-68μF / 3-20V 5 case sizes available LEAD-FREE COMPATIBLE COMPONENT CASE DIMENSIONS: millimeters (inches) L Code POLARITY BAND NOT TO EXCEED CENTER LINE EIA Code EIA Metric %A 1206 3126-18 B 1210 3528-15 0805 2012-10 Height (H) 3.20 +0.20 (0.126 +0.008 ) -0.008 1.60 +0.20 -0.20 (0.063 +0.008 ) -0.008 (0.063 +0.008 ) -0.008 3.50 +0.20 2.80 +0.20 -0.20 2.00 (0.079 H K Lt Width (W) (0.138 %H S Length (L) 0402 1005-07 1.00 (0.039 W %L 0603 1608-10 1.60 (0.063 R 0805 2012-15 2.00 (0.079 -0.20 +0.008 ) -0.008 +0.20 -0.00 +0.008 ) -0.000 +0.20 -0.00 +0.008 ) -0.000 +0.25 -0.15 +0.010 ) -0.006 +0.25 -0.15 +0.010 ) -0.006 -0.10 (0.110 +0.008 ) -0.004 1.35 +0.15 -0.00 (0.53 +0.006 ) -0.000 Termination Spacing(S) Minimum Average Termination Mass Length (Lt) 1.80 min. 0.15 (0.006) 44.6mg 1.60 +0.20 -0.20 1.50 max. 2.00 min. 0.15 min. 90.0mg 1.00 max. 0.70 min. 0.15 min. 17.1mg 0.40 min. 0.10 (0.004) 2.8mg 0.55 min. 0.15 (0.006) 8.6mg 0.70 min. 0.15 (0.006) 29.9mg 0.50 +0.20 0.50 +0.20 -0.00 -0.00 +0.008 (0.020 +0.008 ) (0.020 ) -0.000 -0.000 +0.20 +0.20 0.85 0.85 -0.10 -0.10 (0.033 +0.008 ) -0.004 (0.033 +0.008 ) -0.004 1.35 +0.20 1.35 +0.20 -0.10 (0.053 +0.008 ) -0.004 -0.10 (0.053 +0.008 ) -0.004 Under development HOW TO ORDER TMC R Type TACmicrochip® Case Size See table above 106 M 010 E HS Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Tolerance K = ±10% M = ±20% Rated DC Voltage 003 = 3Vdc 004 = 4Vdc 006 = 6.3Vdc 010 = 10Vdc 016 = 16Vdc 020 = 20Vdc 025 = 25Vdc 050 = 50Vdc Packaging E = Non Modular qty. supplied on 7" reel V = Non Modular qty. supplied on 4¼"reel E, V = Standard Tin Termination Plastic Tape Termination and Special Requirements Alternative characters may be used for special requirements. TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Rated Voltage (VR) Category Voltage (VC) Surge Voltage (VS) Surge Voltage (VS) Temperature Range: Reliability: Termination Finish: 76 +85°C: +125°C: +85°C: +125°C: All technical data relate to an ambient temperature of +25°C 0.10 μF to 68 μF ±10%; ±20% 0.005CV or 0.2μA whichever is the greater 3 4 6.3 10 16 20 25 2 2.7 4 7 10 13 17 3.9 5.2 8 13 20 26 32 2.6 3.2 5 8 12 16 20 -55°C to +125°C HRC5000, Weibull B grade, 0.1% per 1000 hours Nickel and Tin Plating (standard), Nickel and Gold Plating option available upon request 50 33 65 40 TMC Series Established Reliability TACmicrochip® ESTABLISHED RELIABILITY RANGE (EIA SIZES) (LETTER DENOTES CASE SIZE) Capacitance μF Code 0.10 104 0.15 154 0.22 224 0.33 334 0.47 474 0.68 684 1.0 105 1.5 155 2.2 225 3.3 335 475 4.7 6.8 685 10 106 15 156 22 226 33 336 47 476 68 686 Released codes 2.0V 3.0V 4.0V Voltage Rating DC (VR ) at 85°C 6.3V 10V 16V K L R R R* R R* A A* R R R R(M) R* A R R K/L L K*/L L L L/R L/R R H*/R 20V K* 25V 50V R* A* L L L L R* R* R R R(M) A* A* A* B* B (M tolerance only) *Codes under development – subject to change. Note: Voltage ratings are minimum values. AVX reserves the right to supply higher ratings in the same case size, to the same reliability standards. RATINGS & PART NUMBER REFERENCE AVX Part No. EIA Rated DCL DF Case Cap Voltage (μA) % Size (μF) (V) Max. Max. 3 Volt @ 85ºC (2 Volt @ 125ºC) 0805 R 15 3 0.2 0805 R 33 3 0.5 4 Volt @ 85ºC (2.7 Volt @ 125ºC) TMCR106*004EHS 0805 R 10 4 0.2 TMCR156*004EHS 0805 R 15 4 0.3 TMCR226*004EHS 0805 R 22 4 0.4 TMCR336M004EHS 0805 R 33 4 0.7 TMCR476*004EHS 0805 R 47 4 0.9 TMCA686*004EHS 1206 A 68 4 1.4 6.3 Volt @ 85ºC (4 Volt @ 125ºC) TMCK105*006EHS 0402 K 1.0 6.3 0.2 TMCL475*006EHS 0603 L 4.7 6.3 0.2 TMCR685*006EHS 0805 R 6.8 6.3 0.2 TMCR106*006EHS 0805 R 10 6.3 0.3 TMCR156*006EHS 0805 R 15 6.3 0.5 TMCR226*006EHS 0805 R 22 6.3 0.7 TMCR336*006EHS 0805 R 33 6.3 1 TMCA476*006EHS 1206 A 47 6.3 1.5 TMCA686*006EHS 1206 A 68 6.3 2.2 10 Volt @ 85ºC (7 Volt @ 125ºC) TMCK474*010EHS 0402 K 0.47 10 0.2 TMCL474*010EHS 0603 L 0.47 10 0.2 TMCL684*010EHS 0603 L 0.68 10 0.2 TMCK105*010EHS 0402 K 1.0 10 0.2 TMCL105*010EHS 0603 L 1.0 10 0.2 TMCL155*010EHS 0603 L 1.5 10 0.2 TMCL225*010EHS 0603 L 2.2 10 0.2 TMCR156*003EHS TMCR336*003EHS ESR Max. (Ω) @100kHz MSL 8 10 6 6 1 1 8 8 15 10 15 15 6 6 6 6 6 1 1 1 1 1 1 1 6 8 8 8 8 15 20 15 15 15 10 6 6 6 6 6 1 1 1 1 1 1 1 1 1 1 1 6 6 6 6 6 6 6 15 10 10 15 10 10 10 1 1 1 1 1 1 1 AVX Part No. EIA Rated DCL DF Case Cap Voltage (μA) % Size (μF) (V) Max. Max. TMCL335*010EHS TMCR335*010EHS TMCL475*010EHS TMCR475*010EHS TMCR685*010EHS TMCH106*010EHS TMCR106*010EHS TMCA226*010EHS TMCB336*010EHS TMCB476*010EHS 0603 L 3.3 10 0.2 0805 R 3.3 10 0.2 0603 L 4.7 10 0.2 0805 R 4.7 10 0.2 0805 R 6.8 10 0.3 0805 H 10 10 0.5 0805 R 10 10 0.5 1206 A 22 10 1.1 1210 B 33 10 1.7 1210 B 47 10 2.4 16 Volt @ 85ºC (10 Volt @ 125ºC) TMCL474*016EHS 0603 L 0.47 16 0.2 TMCL684*016EHS 0603 L 0.68 16 0.2 TMCL105*016EHS 0603 L 1.0 16 0.2 TMCL225*016EHS 0603 L 2.2 16 0.2 TMCR335*016#HS 0805 R 3.3 16 0.2 TMCR685*016#HS 0805 R 6.8 16 0.5 TMCR106*016EHS 0805 R 10 16 0.8 20 Volt @ 85ºC (13 Volt @ 125ºC) TMCK104*020EHS 0402 K 0.1 20 0.2 TMCR335*020EHS 0805 R 3.3 20 0.2 TMCR475M020EHS 0805 R 4.7 20 0.5 TMCA106*020#HS 1206 A 10 20 1.0 25 Volt @ 85ºC (17 Volt @ 125ºC) TMCR105*025EHS 0804 R 1.0 25 0.2 TMCA475*025EHS 1206 A 4.7 25 0.6 50 Volt @ 85ºC (33 Volt @ 125ºC) TMCA105*050#HS 1206 A 1.0 50 0.2 ESR Max. (Ω) @100kHz MSL 8 8 10 8 8 8 8 20 15 15 10 6 10 6 6 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 6 6 6 10 8 10 10 10 10 10 10 6 16 6 1 1 1 1 1 1 1 6 8 8 6 40 6 6 1 1 1 1 1 10 8 6 1 1 1 6 1 1 Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. For typical weight and composition see page 125. NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards. 77