TPS Series III New Generation Low ESR that offers very low ESR levels previously only seen by other technologies. Further, continuous improvements in MnO2 technology has allowed reductions in the resistance of the capacitor electrodes in order to further reduce ESR levels. Traditional MnO2 technology guarantees excellent line and field performance, humidity stability and high electrical and thermal stress resistance. Current application trends in circuit designs for switch-mode power supplies, microprocessors, and digital circuits call for higher operating frequencies and smoother filtering. In order to function properly, components with low ESR, high capacitance and high reliability are required. The New Third generation TPS Low ESR series is based on the traditional MnO2 process CASE DIMENSIONS: millimeters (inches) For part marking see page 164 Code EIA Code L±0.20 (0.008) W+0.20 (0.008) H+0.20 (0.008) A+0.30 (0.012) W1±0.20 (0.008) -0.10 (0.004) -0.10 (0.004) -0.20 (0.008) B 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055) C 6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114) D 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) E 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) V 7361-38 7.30 (0.287) 6.10 (0.240) 3.45 ±0.30 (0.136 ±0.012) 3.10 (0.120) 1.40 (0.055) 1.80 (0.071) S Min. W* 6032-15 6.00 (0.236) 3.20 (0.126) 1.50 (0.059) max. 2.20 (0.087) 1.30 (0.051) 2.90 (0.114) Y** 7343-20 7.30 (0.287) 4.30 (0.169) 2.00 (0.079) max. 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) W1 dimension applies to the termination width for A dimensional area only. * Low Profile Version of C Case (max. height 1.5 [0.059]) ** Low Profile Version of D Case (max. height 2.0 [0.079]) HOW TO ORDER TPS D 227 K 010 Type Case Size See table above Capacitor Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Capacitance Tolerance K=±10% M=±20% Rated DC Voltage 002=2.5Vdc 004=4Vdc 006=6.3Vdc 010=10Vdc 016=16Vdc 020=20Vdc 025=25Vdc 035=35Vdc 050=50Vdc NOTE: The EIA & CECC standards for low ESR Solid Tantalum Capacitors allow an ESR movement to 1.25 times catalog limit post mounting. R Packaging R = 7" T/R (Lead Free since production date 1/1/04) 0050 Maximum ESR in Milliohms See note below S = 13" T/R (Lead Free since production date 1/1/04) A = Gold Plating 7" Reel B = Gold Plating 13" Reel TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Rated Voltage (VR) Category Voltage (VC) Surge Voltage (VS) Surge Voltage (VS) Temperature Range: Environmental Classification: Reliability: +85°C: +125°C: +85°C: +125°C: All technical data relate to an ambient temperature of +25°C 4.7 µF to 1500 µF ±10%; ±20% 2.5 4 6.3 10 16 20 25 1.7 2.7 4 7 10 13 17 3.3 5.2 8 13 20 26 32 2.2 3.4 5 8 13 16 20 -55°C to +125°C 55/125/56 (IEC 68-2) 1% per 1000 hours at 85°C, VR with 0.1/V series impedance, 60% confidence level Meets requirements of AEC-Q200 35 23 46 28 50 33 65 40 35 TPS Series III New Generation Low ESR CAPACITANCE AND RATED VOLTAGE, VR (VOLTAGE CODE) RANGE LETTER DENOTES CASE SIZE (ESR in mΩ) SERIES III MATRIX Capacitance µF Code 4.7 6.8 10 15 475 685 106 156 22 226 33 336 47 476 68 2.5V (e) 4V (G) Rated Voltage DC (VR) to 85°C 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) 50V (T) D(300) C(150) C(100) D(100) C(150) W(140) D(100) D(100) E(100) D(125) D(100) D(125) E(125) D(200) E(100) V(80) B(250) W(125) D(80) D(75) E(70) E(80) V(100) 686 W(110) Y(70,100) D(70) D(70) E(125) V(80) 100 107 C(75) Y(65,100) 150 157 D(50) D(60) E(55) Y(65,100) E(50) V(45) 220 227 330 C(75) D(50) Y(65,100) D(50) Y(65,100) D(50) E(50) E(40) V(40) E(45) V(40) D(100) D(40) D(50) Y(65,100) 337 D(35) D(45) 470 477 D(45) E(35) E(45) 680 687 E(40) E(45) V(35) 1000 108 E(30) 1500 158 V(30) D(45) V(60) V(45,50) V(25) E(40) Red - Developmental Ratings - subject to change For TPS series and the case sizes C, D and E the ESR limits are printed on capacitor side in the following format: T x x x -where x x x is ESR limit in milliohms i.e. T100 represents max. ESR of 100 milliohms. NOTE: The EIA & CECC standards for low ESR Solid Tantalum Capacitors allow an ESR movement to 1.25 times catalog limit post mounting. 36 ESR limits quoted in brackets (milliohms) TPS Series III New Generation Low ESR RATINGS & PART NUMBER REFERENCE AVX Part No. TPSD227*002#0045 TPSE108*002#0030 TPSV158*002#0030 TPSD227*004#0040 TPSD337*004#0035 TPSD477*004#0045 TPSE477*004#0035 TPSE687*004#0040 TPSV108*004#0025 TPSB476*006#0250 TPSW686*006#0110 TPSC107*006#0075 TPSY107*006#0100 TPSD157*006#0050 TPSD227*006#0050 TPSY227*006#0100 TPSD337*006#0045 TPSE477*006#0045 TPSE687*006#0045 TPSV687*006#0035 TPSC336*010#0150 TPSW476*010#0125 TPSY686*010#0100 TPSC107*010#0075 TPSD107*010#0050 TPSY107*010#0100 TPSD157*010#0050 TPSY157*010#0100 TPSD227*010#0050 TPSE227*010#0050 TPSE337*010#0040 TPSV337*010#0040 TPSE477*010#0045 TPSV477*010#0040 TPSC226*016#0150 TPSW336*016#0140 TPSD476*016#0080 TPSD686*016#0070 TPSD107*016#0060 TPSE107*016#0055 TPSY107*016#0100 TPSV157*016#0045 TPSV227*016#0050 Rated Case Capacitance Voltage Size (µF) (V) D E V D D D E E V B W C Y D D Y D E E V C W Y C D Y D Y D E E V E V C W D D D E Y V V 220 1000 1500 220 330 470 470 680 1000 47 68 100 100 150 220 220 330 470 680 680 33 47 68 100 100 100 150 150 220 220 330 330 470 470 22 33 47 68 100 100 100 150 220 2.5 2.5 2.5 4 4 4 4 4 4 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 10 10 10 10 10 10 10 10 10 10 10 10 10 10 16 16 16 16 16 16 16 16 16 DCL DF ESR (µA) % Max. (mΩ) Max. Max. @100kHz 4.4 20 30 8.8 13.2 18.8 18.8 27.2 40 3 4.3 6.3 6.3 9.5 13.9 13.9 20.8 29.6 42.8 42.8 3.3 4.7 6.8 10 10 10 15 15 22 22 33 33 47 47 3.5 5.3 7.5 10.8 16 16 16 24 35.2 8 14 20 8 8 12 10 10 16 6 6 6 6 6 8 10 8 10 10 14 6 6 6 8 6 6 6 6 8 8 8 10 10 10 6 6 6 6 6 6 8 6 8 45 30 30 40 35 45 35 40 25 250 110 75 100 50 50 100 45 45 45 35 150 125 100 75 50 100 50 100 50 50 40 40 45 40 150 140 80 70 60 55 100 45 50 All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. * Insert K for ±10% and M for ±20% Capacitance Tolerance 100kHz Ripple Current Ratings (A) 100kHz Ripple Voltage Ratings (V) 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC 1.826 2.345 2.887 1.936 2.070 1.826 2.171 2.031 3.162 0.583 0.905 1.211 1.118 1.732 1.732 1.118 1.826 1.915 1.915 2.673 0.856 0.849 1.118 1.211 1.732 1.118 1.732 1.118 1.732 1.817 2.031 2.500 1.915 2.500 0.856 0.802 1.369 1.464 1.581 1.732 1.118 2.357 2.236 1.643 2.111 2.598 1.743 1.863 1.643 1.954 1.828 2.846 0.525 0.814 1.090 1.006 1.559 1.559 1.006 1.643 1.723 1.723 2.405 0.771 0.764 1.006 1.090 1.559 1.006 1.559 1.006 1.559 1.635 1.828 1.250 1.723 2.250 0.771 0.722 1.232 1.317 1.423 1.559 1.006 2.121 2.012 0.730 0.938 1.155 0.775 0.828 0.730 0.868 0.812 1.265 0.233 0.362 0.484 0.447 0.693 0.693 0.447 0.730 0.766 0.766 1.069 0.343 0.339 0.447 0.484 0.693 0.447 0.693 0.447 0.693 0.727 0.812 1.000 0.766 1.000 0.343 0.321 0.548 0.586 0.632 0.693 0.447 0.943 0.894 0.082 0.070 0.087 0.077 0.072 0.082 0.076 0.081 0.079 0.146 0.099 0.091 0.112 0.087 0.087 0.112 0.082 0.086 0.086 0.094 0.128 0.106 0.112 0.091 0.087 0.112 0.087 0.112 0.087 0.091 0.081 0.100 0.086 0.100 0.128 0.112 0.110 0.102 0.095 0.095 0.112 0.106 0.112 0.074 0.063 0.078 0.070 0.065 0.074 0.068 0.073 0.071 0.131 0.090 0.082 0.101 0.078 0.078 0.101 0.074 0.078 0.078 0.084 0.116 0.095 0.101 0.082 0.078 0.101 0.078 0.101 0.078 0.082 0.073 0.090 0.078 0.090 0.116 0.101 0.099 0.092 0.085 0.086 0.101 0.095 0.101 0.033 0.028 0.035 0.031 0.029 0.033 0.030 0.032 0.032 0.058 0.040 0.036 0.045 0.035 0.035 0.045 0.033 0.034 0.034 0.037 0.051 0.042 0.045 0.036 0.035 0.045 0.035 0.045 0.035 0.036 0.032 0.040 0.034 0.040 0.051 0.045 0.044 0.041 0.038 0.038 0.045 0.042 0.045 # Standard Plating # Gold Plating – Insert R for 7" reel and S for 13" reel – Insert A for 7" reel and B for 13" reel NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards. 37 TPS Series III New Generation Low ESR RATINGS & PART NUMBER REFERENCE AVX Part No. TPSC226*020#0100 TPSD336*020#0100 TPSD476*020#0075 TPSE476*020#0070 TPSD686*020#0070 TPSV107*020#0060 TPSD156*025#0100 TPSD226*025#0100 TPSD336*025#0100 TPSE336*025#0100 TPSE476*025#0080 TPSE686*025#0125 TPSV686*025#0080 TPSD106*035#0125 TPSD156*035#0100 TPSD226*035#0125 TPSE226*035#0125 TPSD336*035#0200 TPSE336*035#0100 TPSD475*050#0300 Rated Case Capacitance Voltage Size (µF) (V) C D D E D V D D D E E E V D D D E D E D 22 33 47 47 68 100 15 22 33 33 47 68 68 10 15 22 22 33 33 4.7 20 20 20 20 20 20 25 25 25 25 25 25 25 35 35 35 35 35 35 50 DCL DF ESR (µA) % Max. (mΩ) Max. Max. @100kHz 4.4 6.6 9.4 9.4 13.6 20 3.8 5.5 8.3 8.3 8.3 17 17 3.5 5.3 7.7 7.7 11.6 11.6 2.4 6 6 6 6 6 8 6 6 6 6 6 6 6 6 6 6 6 6 6 6 100 100 75 70 70 60 100 100 100 100 80 125 80 125 100 125 125 200 100 300 All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. * Insert K for ±10% and M for ±20% Capacitance Tolerance NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards. 38 100kHz Ripple Current Ratings (A) 100kHz Ripple Voltage Ratings (V) 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC 1.049 1.225 1.414 1.535 1.464 2.041 1.225 1.225 1.225 1.285 1.436 1.149 1.768 1.095 1.225 1.095 1.149 0.866 1.285 0.707 0.944 1.102 1.273 1.382 1.317 1.837 1.102 1.102 1.102 1.156 1.293 1.034 1.591 0.986 1.102 0.986 1.034 0.779 1.156 0.636 0.420 0.490 0.566 0.614 0.586 0.816 0.490 0.490 0.490 0.514 0.574 0.460 0.707 0.438 0.490 0.438 0.460 0.346 0.514 0.283 0.105 0.122 0.106 0.107 0.102 0.122 0.122 0.122 0.122 0.128 0.115 0.144 0.141 0.137 0.122 0.137 0.144 0.173 0.128 0.212 0.094 0.110 0.095 0.097 0.092 0.110 0.110 0.110 0.110 0.116 0.103 0.129 0.127 0.123 0.110 0.123 0.129 0.156 0.116 0.191 0.042 0.049 0.042 0.043 0.041 0.049 0.049 0.049 0.049 0.051 0.046 0.057 0.057 0.055 0.049 0.055 0.057 0.069 0.051 0.085 # Standard Plating # Gold Plating – Insert R for 7" reel and S for 13" reel – Insert A for 7" reel and B for 13" reel