Type M Right Angle Female for Daughter Cards Series 8075

Type M Right Angle Female
for Daughter Cards
Series 8075
•
•
•
•
•
•
55 signal contacts in a 5 x 11 position configuration
3 positions for power or coax contacts
Center cavity with prealignment guides and keying option
See pages 52 and 53 for keying options
Designed for gas tight press-fit installation
This connector can be used by itself or in conjunction with Style
A, B, C, or L connectors
• See pages 54 and 55 for available contacts
LEAD-FREE COMPATIBLE
COMPONENT
Contact Area
0.1µm min. Au.65µm Pd/Ni
0.76µm min. Au
Press-fit Area
1.5-3.0µm Sn
1.5-3.0µm Sn
Under Coat
1.2-3.0µm Ni
1.2-3.0µm Ni
49.9 +0 -0.2
X
2.0
20.7
2 x 4 = 8.0
2.0 TYP.
XXX =
Plating Code
833
863
= Type M Right Angle Female with shield, with peg
= Type M Right Angle Female with shield, without peg
0.95 MAX.
X
2.0 TYP.
2 x 10 = 20.0
6.25
7.5
7.5
11.4
27 8075 355 011 XXX+
27 8075 355 012 XXX+
3.7 MAX.
3.2
12.25
3.0
7.6
4.0
12.8
6.0
2.0 TYP.
1.8
28
2 x 5 = 10.0
Type M Right Angle Female
for Daughter Cards
2.0 TYP.
2 x 10 = 20.0
2 x 12 = 24.0
6.25
2.5
2.5
15 -Ø1.3 +0.1 -0
HOLE
0.1
7.5
7.5
2.0
2.5
0.1
2.5
66 -Ø0.6 ±0.05
HOLE
3.5 MAX.
1.5 MAX.
2 x 5 = 10.0
2.0 TYP.
BOARD LAYOUT
6.0
2 -Ø
2.
HO 0 ±0.1
LE
Series 8075
0.1
66 -Ø0.6 ±0.05
HOLE
12 -Ø1.3 +0.1 -0
HOLE
0.1
5.0
6.25
7.5
7.5
6.0
2 -Ø
2.
HO 0 ±0.1
LE
2 x 5 = 10.0
2.0 TYP.
1.5 MAX.
3 -Ø2.0 +0.05 -0
HOLE
66 -Ø0.6 ±0.05
HOLE
2.0 TYP.
2 x 10 = 20.0
2 x 12 = 24.0
6.25
2.0
0.1
RECOMMENDED P.C. BOARD LAYOUT
FOR POWER CONTACT OF DIP TYPE
(COMPONENT SIDE)
0.1
3.5 MAX.
2.0 TYP.
2 x 10 = 20.0
2 x 12 = 24.0
3 -Ø2.0 +0.05 -0
HOLE
0.1
7.5
7.5
3.5 MAX.
1.5 MAX.
5.0
0.1
3 -Ø2.0 +0.05 -0
HOLE
6.0
2 -Ø
2.
HO 0 ±0.1
LE
2 x 5 = 10.0
2.0 TYP.
RECOMMENDED P.C. BOARD LAYOUT
FOR COAX CONTACT OF DIP TYPE
(COMPONENT SIDE)
RECOMMENDED P.C. BOARD LAYOUT
FOR WIRE DIP TYPE
(COMPONENT SIDE)
29