ECSpressCON™ Very low RMS Jitter Short Lead time Pb Free/RoHS2 Compliant MSL 1 Peak solder temp +260°C (10 sec) ECX-L LVDS OSCILLATOR ECX-L2 (2.5V) and ECX-L3 (3.3V) low jitter, low current Frequency Configurable SMD crystal controlled oscillators. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS ECX-L2 (+2.5V) PARAMETERS CONDITIONS MIN Frequency Range Operating Temperature Storage Temperature Supply Voltage Frequency Stability * Input Current Output Symmetry Output Load Output Enable Time Output Disable Time Disable Current Output Enable Time Output Disable Time Differential Output Voltage Offset Voltage Rise and Fall Times Aging Start-up Time Phase Jitter, rms Absolute Voltage Range Moisture Sensitivity Level Termination Finish ESD Sensitivity 10.0 0 -40 -55 +2.375 Standard Extended (N Option) VDD Option A Option B Option C Option D 10.0 to 100.0 100.1 to 250.0 250.1 to 500.0 500.1 to 1500.0 @ 50% VDD level Load between each Output Pin 1 ** Pin 1 TYP +2.5 0.7% ECX-L3 (+3.3V) MAX MIN 1500.0 10.0 +70 0 +85 -40 +125 -55 +2.625 +3.135 ± 100 ± 50 ± 25 ± 20 16 18 21 26 45/55 100 0.7% 0.3% 16 TYP +3.3 175 10% VDD to 90% level @ +25°C (first year) @ +25°C (first year) 12 KHz to 20 MHz band 150 350 1.25 350 1500.0 +70 +85 +125 +3.465 ± 100 ± 50 ± 25 ± 20 18 20 22 MHz °C °C °C VDC ppm ppm ppm ppm mA mA mA mA % Ω Vdd Vdd mA ns ns mV V pS ppm ms pS VDC 28 45/55 100 0.3% 16 200 50 Pin 1 = VIL UNITS MAX 200 50 175 500 ±2 10 150 1.0 350 1.25 350 500 ±2 10 1.0 +4.6 +4.6 1 Au 3 kV Max. Human Body Model * Note: Inclusive of +25°C tolerance, operating temperature, input voltage change, load change, shock and vibration. **Note: Internal pull-up resistor allows active output in pin 1 is left open. Part Number Guide Series Voltage ECX-L 2 = +2.5V 3 = +3.3V (LVDS Output) Package 2 = 2.5 x 2 mm 3 = 3.2 x 2.5 mm 5 = 5 x 3.2 mm 7 = 7 x 5 mm Stability A = ±100 ppm B = ±50 ppm C = ±25 ppm D = ±20 ppm Operating Temperature L = -10 ~ +70°C M = -20 ~ +70°C N = -40 ~ +85°C P = -40 ~ +105°C Frequency (MHz) - Customer Specified Example ECX-L35BN-156.250 1105 South Ridgeview Road z Olathe, KS 66062 z Phone: 913.782.7787 z Fax: 913.782.6991 z www.ecsxtal.com ECSpressCON™ ECX-L LVDS OSCILLATOR Phase Noise and Jitter Data (typical) SSB Phase Noise Data (dBc/Hz typical) Frequency (offset) 77.760 122.880 125.000 156.250 10 Hz 1 KHz 1 KHz 10 KHz 100 KHz 1 MHz 5 MHz Phase Jitter pS 12 KHz ~ 20 MHz, RMS 212.5 491.520 622.080 1000 1250 -64 -84 -118 -128 -137 -145 -152 -68 -99 -113 -119 -120 -140 -142 -63 -94 -113 -118 -119 -137 -146 -55 -85 -109 -116 -118 -139 -146 -62 -93 -105 -113 -115 -135 -143 -61 -86 -100 -105 -105 -126 -137 -48 -85 -101 -102 -103 -124 -133 -52 -82 -93 -97 -97 -116 -127 -42 -81 -93 -96 -97 -119 -129 0.9 0.8 1.1 0.9 1.0 1.1 1.2 1.5 1.1 Phase Noise Plot of ECX-L35BN-77.760 (typical) Package Data Item Description Lid Base Metal Ceramic Plating Gold/Nickel Surface/Under 1105 South Ridgeview Road z Olathe, KS 66062 z Phone: 913.782.7787 z Fax: 913.782.6991 z www.ecsxtal.com ECSpressCON™ ECX-L LVDS OSCILLATOR Dimensions (mm) 7 = 7x5 Package 5 = 5x3.2 Package 3 = 3.2x2.5 Package 2 = 2.5x2 Package Suggested Reflow Profile Pin Connections 1105 South Ridgeview Road z Olathe, KS 66062 z Phone: 913.782.7787 z Pin # Function 1 2 3 4 5 6 O/E or No Connect No Connect Ground Differential Output Complementary Output Supply Voltage Fax: 913.782.6991 z www.ecsxtal.com