Mechanical Information ® StreetSense LED Street Light ATEX / IECEx 122 [4.8] 3880 [34.7] 252W 674 [26.5 ] 131W Fixture Weight 1 light engines: 2 light engines: 3 light engines: 7.26kg (16 lbs) 11.34kg (25 lbs) 15.42kg (34 lbs) EPA (Sq. ft) 1 light engines: 2 light engines: 3 light engines: 0.60 0.87 1.13 467 [18.4] 65W Mounting: Accommodates 31.75mm (42.16mm OD) 50.8mm (60.32mm OD) pipe. Provision for adjustment of +/- 5° at 2.5° increments Electrical Specifications 372 [14.7] Operating Voltage: Dimensions in mm (inches) Total System Power Consumption: See table Operating Temp: -40°C to 74°C (-40°F to 165°F) Noise Requirements / EMC: Certifications and Ratings: • ATEX / IECEx Zone 2, 22 • Certificate Numbers: IECEx ETL 13.0017 ITS 13ATEX47874 • CE • UL 1598 (Suitable for Wet Locations) • CSA C22.2 No. 250.0-08 • IP 66 Universal inputs 100-277V AC, 50/60Hz FCC Title 47, Subpart B, Section 15, class A device. RF Immunity; 10V/m, 80MHz-1GHz Transient Protection 100-277VAC, 50/60Hz: Open circuit surge protection 6kV standard per ANSI/IEEE C62.41. 2.2002 cat C low Protection Type: THD: <15% (100 - 240V AC) <20% (277V AC) Power Factor: >0.9 • Ex nA IIC T3 Gc Material Compliances: • IEC 60079-0 : 2011 • EC 60079-15 : 2010 • RP-8-00 (R2005) • IEC 60529 (IP 66) • ANSI 1012 • ANSI C 136.15-2011 • ANSI/IEEE C62.41.2-2002 • ANSI/NEMA/ANSLG C78.377-2008 • ANSI C136.2-2004 (R2009) • ANSI C136.3-2005 • ANSI C136.10-2006 • ANSI C136.21-2004 • ANSI C136.25-2009/IEC 60529 • ANSI C136.31-2001 • ANSI C136.32-2006 • ANSI C136.37-2011 • ASTM B117-97 • ASTM B117 - salt spray (3000 hours) • Conforms with CALTRANS vibration test 611 – 3G vibration (2,000,000 cycles) Housing: Die cast alum alloy A360 Polymeric materials UL94 V0 flame retardant materials Finish: Polyester powder coat for superior corrosion resistance, Gray - RAL 7040 Lens: Optically optimized, 6mm tempered glass Photometric Information CRI: 70 CCT: 4,300K (neutral white) Optics: IES Type III All values typical unless otherwise stated All lumen values are typical (tolerance +/- 10%) Warranty: • 7 year full performance warranty www.dialight.com 1 StreetSense® LED Street Light Ordering Information Initial Fixture Lumens Total System Power Consumption Lumen Per Watt BUG Rating SLA3N4CG Part Number 5,500 65 85 B1U1G1 SLA3N4HG 10,900 131 83 B2U1G2 SLA3N4SG 20,250 252 80 B3U1G3 Note: Consult Factory for additional power, IES distribution and color temperature types Measurement Data - IES Type III Intensity Distribution Curve (cd) Iso-Illuminance Chart 65 Watt Mounting Height Multiplier 10’ (3.0m) 6.25 15’ (4.6m) 2.778 20’ (6.1m) 1.563 25’ (7.6m) 1 30’ (9.1m) 0.694 35’ (10.7m) 0.51 40’ (12.7m) 0.391 45’ (13.4m) 0.309 50’ (15.2m) 0.25 Mounting height - 25’ (7.6m) 131 Watt Mounting Height 10’ (3.0m) Foot Candle Multiplier 9 15’ (4.6m) 4 20’ (6.1m) 2.25 25’ (7.6m) 1.44 30’ (9.1m) 1 35’ (10.7m) 0.735 40’ (12.7m) 0.563 45’ (13.4m) 0.444 50’ (15.2m) 0.36 Mounting height - 30’ (9.1m) 252 Watt Mounting Height Multiplier 10’ (3.0m) 16.000 15’ (4.6m) 7.111 20’ (6.1m) 4.000 25’ (7.6m) 2.560 30’ (9.1m) 1.778 35’ (10.7m) 1.306 40’ (12.7m) 1.000 45’ (13.4m) 0.790 50’ (15.2m) 0.640 Mounting height - 40’ (12.1m) - Location of streetlight Spacing of each box is equal to mounting height in feet (meters). Ex: 40’ (12.2m) mounting height = each box is 40’ (12.2m), 30’ (9.1m) mounting height = each box is 30’ (9.1m) Values shown are for cool white and neutral white units, for warm white multiply the Fc or Lux value by .82 Dialight reserves the right to make changes at any time in order to supply the best product possible. The most current version of this document will always be available at: www.dialight.com/Assets/Brochures_And_Catalogs/Illumination/MDTFSLZONEIIX001.pdf Warranty Statement: EXCEPT FOR THE WARRANTY EXPRESSLY PROVIDED FOR [HEREIN/ABOVE/BELOW], DIALIGHT DISCLAIMS ANY AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NONINFRINGEMENT. 2 www.dialight.com MDTFSLZONEIIX001_B