3mm LED CBI® Circuit Board Indicator .200” High LED Centerline, with Pin 3.96 [.156] Ø 3.43 MAX FLANGE [.135] 4.95 MAX [.195] PART NO. COLOR HIGH EFFICIENCY 7.19 [.283] Dimension 1 6.60 [.260] 0.51 [.020] – 1.65 [.065] + 5.08 [.200] LED HOUSING 3.40 [.134] CATHODE LEAD 0.71 [.028] 2.54 NOM [.100] 2X 0.51 [.020] 6.27 [.247] 2X .51 [.020] SQ. NOM. 2.54 ±.05 [.100 ±.002] 1.27 ±.05 [.050 ±.002] 2.54 ±.05 [.100 ±.002] 551-xx11 CHART 551-0211 551-0311 551-0411 551-0811 LOW CURRENT Green Yellow Red Blue³ A A A B 551-1111 551-1211 551-1311 Red Yellow Green B B B Dimension 2 Dimensions in mm [inches] Features • Designed to accommodate DIN 41494 • Locating pin provides stability during soldering CHART A CHART B Dimension 1 3.10 ±.20 [.122 ±.008] 2.92 ±.25 [.115 ±.010] Dimension 2 2X .51 [.020] SQ. NOM. 2X .46 [.018] SQ. NOM. • Multiple CBIs form horizontal LED arrays on 3.96mm (0.156”) center-lines • High Contrast, UL 94 V-0 rated, black housing • Oxygen index: 31.5% • Polymer content: PBT, 0.227 g • Available with Red housing • Available without pin • Housing stand-offs facilitate PCB cleaning ³ NEW ATTENTION • Solderability per MIL-STD-202F, method 208F • LEDs are safe for direct viewing per IEC 825-1, OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES EN-60825-1 Tolerance note: As noted, otherwise: • LED Protrusion: ±0.04 mm [±0.016] • CBI Housing: ±0.02mm[±0.008] Typical Operating Characteristics (TA=25°C) See LED data sheet for additional information See page 4-70 and 4-71 for Reference Only LED Drive Circuit Examples. See page 4-72 for Pin Out Part Number Color Peak Wavelength nm IV mcd VF Volts Test Current (mA) Viewing Angle 2Θ Θ½ LED Data sheet Page # 551-0211 551-0311 551-0411 551-0811 551-1111 551-1211 551-1311 Green Yellow Red Blue Red Yellow Green 563 585 650 428 635 585 565 16 6.3 10 12 1.6 1.6 1.6 2.1 2.1 2 3.5 1.7 1.8 1.9 10 10 10 10 2 2 2 45° 45° 45° 70° 60° 60° 60° 521-9408 521-9428 521-9427 521-9831 521-9324 521-9325 521-9326 4-64 4-64 4-64 4-57 4-60 4-60 4-60 Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 4-27 4 NEW 3mm Discrete LED Tinted, Diffused 521-9831 PART NO. SURFACE NOT FLAT 4.8 [.189] 4.4 [.173] 0.7 [.028] 0.4 [.016] 4.8 [.189] 4.4 [.173] 521-9831 0.6 [.024] 0.4 [.016] 2.9 [.114] ø 2.7 [.106] COLOR Blue³ 3.4 [.134] 3.1 [.122] 2.54 [.100] CATHODE 3.7 [.145] 3.5 [.138] 6.1 [.240] 5.7 [.224] 1.8 [.071] 1.2 [.047] 0.6 [.024] 0.4 [.016] 29 [1.142] 27 [1.063] MOUNTING CLIP: 515-0006 located on page 4-65 Dimensions in mm [inches] ATTENTION ³ OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES 4 Blue -9831 ABSOLUTE MAXIMUM RATINGS (TA=25°C) Power Dissipation (mW) 100 Forward Current (mA) Derating (mA/°C) From 55°C 20 .44 Operating Temperature (°C) -40/+100 Storage Temperature (°C) -40/+100 Soldering Temperature 260°C, 5 seconds, 1.6 mm from case Solder Adherence per MIL-STD-202E, Method 208C Blue OPERATING CHARACTERISTICS (TA=25°C) Luminous Intensity (mcd) IF=10mA -9831 Min. Typical 6.3 12 Peak Wavelength (nm) λ Peak Typical 428 Viewing Angle (2Θ½) Typical 70° Forward Voltage (V) IF=10mA Typical Max. 3.5 4.2 Reverse Voltage (V) IR=10µA Min. 3 Θ is the off axis angle at which the luminous intensity is half the axial luminous intensity Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 4-57 3mm Discrete LED Low Current Diffused 521-9324, -9325, -9326 4.4 [.175] 1.01 [.040] .40 [.016] 1.0 [.040] 2.54 [.100] 3.3 [.130] 5.97 [.235] 1.00 26.67 [.040] [1.05] MIN. PART NO. COLOR 521-9324 521-9325 521-9326 Red Yellow Green .40 [.016] CATHODE Dimensions in mm [inches] MOUNTING CLIP: 515-0006 located on page 4-65 Red Yellow Green -9324 -9325 -9326 Power Dissipation (mW) 20 20 20 Forward Current (mA) Derating (mA/°C) From 90°C 7 .7 7 .7 7 .7 500 500 500 Operating Temperature (°C) -55/+100 -55/+100 -55/+100 Storage Temperature (°C) -55/+100 -55/+100 -55/+100 ABSOLUTE MAXIMUM RATINGS (TA=25°C) Peak Current (mA) Pulse width = 10 µs Soldering Temperature 260°C, 5 seconds, 1.6 mm from case Solder Adherence per MIL-STD-202E, Method 208C OPERATING CHARACTERISTICS (TA=25°C) Red Yellow Green -9324 -9325 -9326 Luminous Intensity (mcd) IF=2mA Min. Typical 1 1.6 1 1.6 1 1.6 Peak Wavelength (nm) λ Peak Typical 635 585 565 Viewing Angle (2Θ ½) Typical 60° 60° 60° Forward Voltage (V) IF=2mA Typical Max. 1.7 2.2 1.8 2.7 1.9 2.2 Reverse Voltage (V), IR=50µA Min. 5 5 5 Θ is the off axis angle at which the luminous intensity is half the axial luminous intensity 4-60 Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com 3mm Discrete LED High Efficiency Diffused 4.70 ±.20 [.185 ±.008] .79 ±.20 [.031 ±.008] 521-94xx TYPE 521-9408 521-9427 521-9428 3.30 [.130] MAX .50 [.020] NOM COLOR Green Red Yellow 2.49 ±.25 [.098 ±.010] 3.09 ±.20 [.122 ±.008] 1.30 ±.25 [.051 ±.010] 1.0 [.040] 24.00 ±.25 [.945 ±.010] 6.10 ±.38 [.240 ±.015] .50 [.020] NOM CATHODE (–) MOUNTING CLIP: 515-0006 located on page 4-65 Dimensions in mm [inches] Green Red Yellow -9408 -9427 -9428 Power Dissipation (mW) 75 60 60 Forward Current (mA) 25 20 20 ABSOLUTE MAXIMUM RATINGS (TA=25°C) Derating (mA/°C) .5 .5 .5 60 60 60 Operating Temperature (°C) -25/+85 -25/+85 -25/+85 Storage Temperature (°C) -30/+100 -30/+100 -30/+100 From 50°C Peak Current (mA) Soldering Temperature 260°C, 5 seconds, 1.6 mm from case Solder Adherence per MIL-STD-202E, Method 208C OPERATING CHARACTERISTICS (TA=25°C) Green Red Yellow -9408 -9427 -9428 Luminous Intensity (mcd) IF=10mA Min. Typical 5.6 16 3.6 10 2.2 6.3 Peak Wavelength (nm) λ Peak Typical 563 650 585 Viewing Angle (2Θ ½) Typical 45° 45° 45° Forward Voltage (V) IF=10mA Typical Max. 2.1 3 2 3 2.1 3 Reverse Voltage (V), IR=10µA Min. 3 3 3 Θ is the off axis angle at which the luminous intensity is half the axial luminous intensity 4-64 Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com